ADInstruments software downloads

Life Science Data Acquisition Software

The Equivital LifeMonitor Device Enabler allows streaming data from Equivital LifeMonitors directly into LabChart.

The Pressure Volume Loop Analysis Module extends LabChart to provide the detection and analysis of ventricular pressure and volume data.

The ADInstruments GLP Client enables you to satisfy the requirements for non-repudiation of data. Features include a comprehensive audit trail, secure signing, preservation of raw data and date/time stamping.

The Blood FlowMeter Device Enabler is a software addition to LabChart, which supports the Blood FlowMeter hardware, which is manufactured by Oxford Optronix Ltd.

The ADInstruments CODA Monitor Device Enabler is a software enabler for LabChart, allowing an ADInstruments CODA Monitor to stream data into LabChart.

The Human NIBP Device Enabler allows the Human NIBP Controller and Nano Core Systems to stream non-invasive blood pressure data directly into LabChart.

The Kent Device Enabler is a software addition to LabChart, allowing Kent Scientific devices to stream data into LabChart.

The Oxford Optronix Device Enabler is a software addition to LabChart that allows a range of tissue monitors manufactured by Oxford Optronix Ltd. to stream data into LabChart.

The Physiotel Device Enabler allows the DSI MX2 2.0 System and supported PhysioTel receivers to stream data directly into LabChart. The DSI Matrix 2.0 System for Physiotel and HD Implants is manufactured by Data Sciences International.

The Playback File Add-On allows streaming in data from any supported LabChart file (including imported data formats such as EDF and WAV), as if the data were coming live from an attached device.

The Trigno Wireless System Device Enabler allows the Trigno Wireless System to stream data directly into LabChart.

The Wii Balance Board Device Enabler for LabChart facilitates communication between a Nintendo Wii Balance Board and LabChart over a wireless Bluetooth connection.

This extension allows LabChart for Windows data to be played as sound either in real time or after recording. Common examples where this might be useful are the play back of heart sounds, animal sounds, voice, or action potential spikes.

Cardiac Axis is a LabChart extension that automates the calculation of frontal plane electrocardiograms and the vectorcardiogram. It can also animate the instantaneous cardiac vector display.

This extension allows you to monitor user-defined events in real time using different criteria and to perform variety of actions on an event occurring.

Export QuickTime allows you to save LabChart data files as QuickTime movies. The QuickTime movies can be viewed on any QuickTime supported platform or embedded in other media that supports QuickTime movies.

This extension allows you to control the digital outputs on a /30 and /35 series PowerLab and the analog outputs on /20, /25, /30 and /35 series PowerLabs.

The LabChart 8 Glucose Calibration extension provides the ability to calibrate the new HD-XG implantable glucose telemeter from DSI in conjunction with the ADInstruments Biopotential Telemetry System.

This extension allows the user to perform linear and non-linear calibration on transducers, sensors, pH electrodes and other equipment.

The Non-Invasive Cardiac Output Add-On enables real-time estimation of Cardiac-Output from an NIBP (Non-Invasive Blood Pressure) channel.

The Scheduler Extension for LabChart allows the scheduling of recordings across one or more LabChart data files.

This extension derives a number of respiratory parameters based on flow and volume, including VE, VT, frequency, PIF, PEF, FVC, FEV1. This extension also generates a flow-volume plot and spirometry reports.

This extension makes use of the gain-telegraph output from an electrophysiological amplifier to continue to display data at the correct scale after a gain change.

The Blood Pressure Module adds functionality to LabChart to identify and analyze various parameters of human and animal ventricular and arterial pressure recordings.

The Cardiac Output Module adds functionality to LabChart to calculate cardiac output from a recorded thermodilution curve.

The DMT Normalization Module provides additional functionality to LabChart when performing in vitro experiments on isolated vessels with Danish Myo Technology wire myographs.

The Dose Response Module extends LabChart to provide dose response curves and analysis from recorded LabChart data. The results can also be exported to applications, such as GraphPad Prism, if required.

The ECG Analysis Module provides a comprehensive set of tools for the identification and analysis of various parameters in the waveform of human or animal ECG recordings. Analysis can be performed in real time or after recording.

The HRV Module provides a comprehensive set of tools for the analysis and display of variation in the interval between heart beats in human and animal electrocardiogram or arterial pulse recordings.

The Metabolic Module provides a comprehensive feature set for metabolic data acquisition and analysis from humans. When used with the Exercise Physiology System it allows customers to perform metabolic calculations appropriate to exercise physiology.

The Peak Analysis Module calculates various parameters for detected peaks, such as height, width, slope, area and various time based parameters. The parameter values are displayed in a table and can be exported to other applications.

The Spike Histogram Module provides the ability to detect, discriminate and analyze extracellular neural spike activity online. Recorded spikes can also be reanalyzed offline with modified discrimination settings.

The Video Capture Module for LabChart allows you to record LabChart data with synchronized video and audio tracks. The recording can be played back to review correlating events between the data, video or audio tracks.

Data acquisition and analysis re-imagined.

A free, reduced-functionality version of our LabChart data acquisition and analysis software.