Hapa yameorodheshwa matoleo 22 ya etcd, kuanzia 20 Machi 2024 hadi toleo la sasa 3.7.3. Kila moja lina kiungo cha faili za kisakinishi za mchapishaji mwenyewe.
matoleo 22 katika miaka 3 · takriban 6.5 kwa mwaka
| Toleo | Tarehe | Ukubwa | Faili |
|---|---|---|---|
| 3.7.3Toleo jipya zaidi | 22 Oktoba 2026 | — | 64-bit ZIP Maelezo ya toleoPlease check out [CHANGELOG](https://github.com/etcd-io/etcd/blob/main/CHANGELOG/CHANGELOG-3.7.md) for a full list of changes. And make sure to read [upgrade guide](https://etcd.io/docs/v3.7/upgrades/upgrade_3_7/) before upgrading etcd (there may be breaking changes).
For installation guides, please check out [play.etcd.io](http://play.etcd.io) and [operating etcd](https://etcd.io/docs/v3.7/op-guide/). Latest support status for common architectures and operating systems can be found at [supported platforms](https://etcd.io/docs/v3.7/op-guide/supported-platform/).
###### Linux
```sh
ETCD_VER=v3.7.3
# choose either URL
GOOGLE_URL=https://storage.googleapis.com/etcd
GITHUB_URL=https://github.com/etcd-io/etcd/releases/download
DOWNLOAD_URL=${GOOGLE_URL}
rm -f /tmp/etcd-${ETCD_VER}-linux-amd64.tar.gz
rm -rf /tmp/etcd-download-test && mkdir -p /tmp/etcd-download-test
curl -L ${DOWNLOAD_URL}/${ETCD_VER}/etcd-${ETCD_VER}-linux-amd64.tar.gz -o /tmp/etcd-${ETCD_VER}-linux-amd64.tar.gz
tar xzvf /tmp/etcd-${ETCD_VER}-linux-amd64.tar.gz -C /tmp/etcd-download-test --strip-components=1 --no-same-owner
rm -f /tmp/etcd-${ETCD_VER}-linux-amd64.tar.gz
/tmp/etcd-download-test/etcd --version
/tmp/etcd-download-test/etcdctl version
/tmp/etcd-download-test/etcdutl version
# start a local etcd server
/tmp/etcd-download-test/etcd
# write,read to etcd
/tmp/etcd-download-test/etcdctl --endpoints=localhost:2379 put foo bar
/tmp/etcd-download-test/etcdctl --endpoints=localhost:2379 get foo
```
###### macOS (Darwin)
```sh
ETCD_VER=v3.7.3
# choose either URL
GOOGLE_URL=https://storage.googleapis.com/etcd
GITHUB_URL=https://github.com/etcd-io/etcd/releases/download
DOWNLOAD_URL=${GOOGLE_URL}
rm -f /tmp/etcd-${ETCD_VER}-darwin-amd64.zip
rm -rf /tmp/etcd-download-test && mkdir -p /tmp/etcd-download-test
curl -L ${DOWNLOAD_URL}/${ETCD_VER}/etcd-${ETCD_VER}-darwin-amd64.zip -o /tmp/etcd-${ETCD_VER}-darwin-amd64.zip
unzip /tmp/etcd-${ETCD_VER}-darwin-amd64.zip -d /tmp && rm -f /tmp/etcd-${ETCD_VER}-darwin-amd64.zip
mv /tmp/etcd-${ETCD_VER}-darwin-amd64/* /tmp/etcd-download-test && rm -rf mv /tmp/etcd-${ETCD_VER}-darwin-amd64
/tmp/etcd-download-test/etcd --version
/tmp/etcd-download-test/etcdctl version
/tmp/etcd-download-test/etcdutl version
```
###### Docker
etcd uses [`gcr.io/etcd-development/etcd`](https://gcr.io/etcd-development/etcd) as a primary container registry, and [`quay.io/coreos/etcd`](https://quay.io/coreos/etcd) as secondary.
```sh
ETCD_VER=v3.7.3
rm -rf /tmp/etcd-data.tmp && mkdir -p /tmp/etcd-data.tmp && \
docker rmi gcr.io/etcd-development/etcd:${ETCD_VER} || true && \
docker run \
-p 2379:2379 \
-p 2380:2380 \
--mount type=bind,source=/tmp/etcd-data.tmp,destination=/etcd-data \
--name etcd-gcr-${ETCD_VER} \
gcr.io/etcd-development/etcd:${ETCD_VER} \
/usr/local/bin/etcd \
--name s1 \
--data-dir /etcd-data \
--listen-client-urls http://0.0.0.0:2379 \
--advertise-client-urls http://0.0.0.0:2379 \
--listen-peer-urls http://0.0.0.0:2380 \
--initial-advertise-peer-urls http://0.0.0.0:2380 \
--initial-cluster s1=http://0.0.0.0:2380 \
--initial-cluster-token tkn \
--initial-cluster-state new \
--log-level info \
--logger zap \
--log-outputs stderr
docker exec etcd-gcr-${ETCD_VER} /usr/local/bin/etcd --version
docker exec etcd-gcr-${ETCD_VER} /usr/local/bin/etcdctl version
docker exec etcd-gcr-${ETCD_VER} /usr/local/bin/etcdutl version
docker exec etcd-gcr-${ETCD_VER} /usr/local/bin/etcdctl endpoint health
docker exec etcd-gcr-${ETCD_VER} /usr/local/bin/etcdctl put foo bar
docker exec etcd-gcr-${ETCD_VER} /usr/local/bin/etcdctl get foo
``` |
| 3.7.2 | 22 Septemba 2026 | — | 64-bit ZIP Maelezo ya toleoPlease check out [CHANGELOG](https://github.com/etcd-io/etcd/blob/main/CHANGELOG/CHANGELOG-3.7.md) for a full list of changes. And make sure to read [upgrade guide](https://etcd.io/docs/v3.7/upgrades/upgrade_3_7/) before upgrading etcd (there may be breaking changes).
For installation guides, please check out [play.etcd.io](http://play.etcd.io) and [operating etcd](https://etcd.io/docs/v3.7/op-guide/). Latest support status for common architectures and operating systems can be found at [supported platforms](https://etcd.io/docs/v3.7/op-guide/supported-platform/).
###### Linux
```sh
ETCD_VER=v3.7.2
# choose either URL
GOOGLE_URL=https://storage.googleapis.com/etcd
GITHUB_URL=https://github.com/etcd-io/etcd/releases/download
DOWNLOAD_URL=${GOOGLE_URL}
rm -f /tmp/etcd-${ETCD_VER}-linux-amd64.tar.gz
rm -rf /tmp/etcd-download-test && mkdir -p /tmp/etcd-download-test
curl -L ${DOWNLOAD_URL}/${ETCD_VER}/etcd-${ETCD_VER}-linux-amd64.tar.gz -o /tmp/etcd-${ETCD_VER}-linux-amd64.tar.gz
tar xzvf /tmp/etcd-${ETCD_VER}-linux-amd64.tar.gz -C /tmp/etcd-download-test --strip-components=1 --no-same-owner
rm -f /tmp/etcd-${ETCD_VER}-linux-amd64.tar.gz
/tmp/etcd-download-test/etcd --version
/tmp/etcd-download-test/etcdctl version
/tmp/etcd-download-test/etcdutl version
# start a local etcd server
/tmp/etcd-download-test/etcd
# write,read to etcd
/tmp/etcd-download-test/etcdctl --endpoints=localhost:2379 put foo bar
/tmp/etcd-download-test/etcdctl --endpoints=localhost:2379 get foo
```
###### macOS (Darwin)
```sh
ETCD_VER=v3.7.2
# choose either URL
GOOGLE_URL=https://storage.googleapis.com/etcd
GITHUB_URL=https://github.com/etcd-io/etcd/releases/download
DOWNLOAD_URL=${GOOGLE_URL}
rm -f /tmp/etcd-${ETCD_VER}-darwin-amd64.zip
rm -rf /tmp/etcd-download-test && mkdir -p /tmp/etcd-download-test
curl -L ${DOWNLOAD_URL}/${ETCD_VER}/etcd-${ETCD_VER}-darwin-amd64.zip -o /tmp/etcd-${ETCD_VER}-darwin-amd64.zip
unzip /tmp/etcd-${ETCD_VER}-darwin-amd64.zip -d /tmp && rm -f /tmp/etcd-${ETCD_VER}-darwin-amd64.zip
mv /tmp/etcd-${ETCD_VER}-darwin-amd64/* /tmp/etcd-download-test && rm -rf mv /tmp/etcd-${ETCD_VER}-darwin-amd64
/tmp/etcd-download-test/etcd --version
/tmp/etcd-download-test/etcdctl version
/tmp/etcd-download-test/etcdutl version
```
###### Docker
etcd uses [`gcr.io/etcd-development/etcd`](https://gcr.io/etcd-development/etcd) as a primary container registry, and [`quay.io/coreos/etcd`](https://quay.io/coreos/etcd) as secondary.
```sh
ETCD_VER=v3.7.2
rm -rf /tmp/etcd-data.tmp && mkdir -p /tmp/etcd-data.tmp && \
docker rmi gcr.io/etcd-development/etcd:${ETCD_VER} || true && \
docker run \
-p 2379:2379 \
-p 2380:2380 \
--mount type=bind,source=/tmp/etcd-data.tmp,destination=/etcd-data \
--name etcd-gcr-${ETCD_VER} \
gcr.io/etcd-development/etcd:${ETCD_VER} \
/usr/local/bin/etcd \
--name s1 \
--data-dir /etcd-data \
--listen-client-urls http://0.0.0.0:2379 \
--advertise-client-urls http://0.0.0.0:2379 \
--listen-peer-urls http://0.0.0.0:2380 \
--initial-advertise-peer-urls http://0.0.0.0:2380 \
--initial-cluster s1=http://0.0.0.0:2380 \
--initial-cluster-token tkn \
--initial-cluster-state new \
--log-level info \
--logger zap \
--log-outputs stderr
docker exec etcd-gcr-${ETCD_VER} /usr/local/bin/etcd --version
docker exec etcd-gcr-${ETCD_VER} /usr/local/bin/etcdctl version
docker exec etcd-gcr-${ETCD_VER} /usr/local/bin/etcdutl version
docker exec etcd-gcr-${ETCD_VER} /usr/local/bin/etcdctl endpoint health
docker exec etcd-gcr-${ETCD_VER} /usr/local/bin/etcdctl put foo bar
docker exec etcd-gcr-${ETCD_VER} /usr/local/bin/etcdctl get foo
``` |
| 3.7.1 | 23 Julai 2026 | — | 64-bit ZIP Maelezo ya toleoPlease check out [CHANGELOG](https://github.com/etcd-io/etcd/blob/main/CHANGELOG/CHANGELOG-3.7.md) for a full list of changes. And make sure to read [upgrade guide](https://etcd.io/docs/v3.7/upgrades/upgrade_3_7/) before upgrading etcd (there may be breaking changes).
For installation guides, please check out [operating etcd](https://etcd.io/docs/v3.7/op-guide/). Latest support status for common architectures and operating systems can be found at [supported platforms](https://etcd.io/docs/v3.7/op-guide/supported-platform/).
###### Linux
```sh
ETCD_VER=v3.7.1
# choose either URL
GOOGLE_URL=https://storage.googleapis.com/etcd
GITHUB_URL=https://github.com/etcd-io/etcd/releases/download
DOWNLOAD_URL=${GOOGLE_URL}
rm -f /tmp/etcd-${ETCD_VER}-linux-amd64.tar.gz
rm -rf /tmp/etcd-download-test && mkdir -p /tmp/etcd-download-test
curl -L ${DOWNLOAD_URL}/${ETCD_VER}/etcd-${ETCD_VER}-linux-amd64.tar.gz -o /tmp/etcd-${ETCD_VER}-linux-amd64.tar.gz
tar xzvf /tmp/etcd-${ETCD_VER}-linux-amd64.tar.gz -C /tmp/etcd-download-test --strip-components=1 --no-same-owner
rm -f /tmp/etcd-${ETCD_VER}-linux-amd64.tar.gz
/tmp/etcd-download-test/etcd --version
/tmp/etcd-download-test/etcdctl version
/tmp/etcd-download-test/etcdutl version
# start a local etcd server
/tmp/etcd-download-test/etcd
# write,read to etcd
/tmp/etcd-download-test/etcdctl --endpoints=localhost:2379 put foo bar
/tmp/etcd-download-test/etcdctl --endpoints=localhost:2379 get foo
```
###### macOS (Darwin)
```sh
ETCD_VER=v3.7.1
# choose either URL
GOOGLE_URL=https://storage.googleapis.com/etcd
GITHUB_URL=https://github.com/etcd-io/etcd/releases/download
DOWNLOAD_URL=${GOOGLE_URL}
rm -f /tmp/etcd-${ETCD_VER}-darwin-amd64.zip
rm -rf /tmp/etcd-download-test && mkdir -p /tmp/etcd-download-test
curl -L ${DOWNLOAD_URL}/${ETCD_VER}/etcd-${ETCD_VER}-darwin-amd64.zip -o /tmp/etcd-${ETCD_VER}-darwin-amd64.zip
unzip /tmp/etcd-${ETCD_VER}-darwin-amd64.zip -d /tmp && rm -f /tmp/etcd-${ETCD_VER}-darwin-amd64.zip
mv /tmp/etcd-${ETCD_VER}-darwin-amd64/* /tmp/etcd-download-test && rm -rf mv /tmp/etcd-${ETCD_VER}-darwin-amd64
/tmp/etcd-download-test/etcd --version
/tmp/etcd-download-test/etcdctl version
/tmp/etcd-download-test/etcdutl version
```
###### Docker
etcd uses [`gcr.io/etcd-development/etcd`](https://gcr.io/etcd-development/etcd) as a primary container registry, and [`quay.io/coreos/etcd`](https://quay.io/coreos/etcd) as secondary.
```sh
ETCD_VER=v3.7.1
rm -rf /tmp/etcd-data.tmp && mkdir -p /tmp/etcd-data.tmp && \
docker rmi gcr.io/etcd-development/etcd:${ETCD_VER} || true && \
docker run \
-p 2379:2379 \
-p 2380:2380 \
--mount type=bind,source=/tmp/etcd-data.tmp,destination=/etcd-data \
--name etcd-gcr-${ETCD_VER} \
gcr.io/etcd-development/etcd:${ETCD_VER} \
/usr/local/bin/etcd \
--name s1 \
--data-dir /etcd-data \
--listen-client-urls http://0.0.0.0:2379 \
--advertise-client-urls http://0.0.0.0:2379 \
--listen-peer-urls http://0.0.0.0:2380 \
--initial-advertise-peer-urls http://0.0.0.0:2380 \
--initial-cluster s1=http://0.0.0.0:2380 \
--initial-cluster-token tkn \
--initial-cluster-state new \
--log-level info \
--logger zap \
--log-outputs stderr
docker exec etcd-gcr-${ETCD_VER} /usr/local/bin/etcd --version
docker exec etcd-gcr-${ETCD_VER} /usr/local/bin/etcdctl version
docker exec etcd-gcr-${ETCD_VER} /usr/local/bin/etcdutl version
docker exec etcd-gcr-${ETCD_VER} /usr/local/bin/etcdctl endpoint health
docker exec etcd-gcr-${ETCD_VER} /usr/local/bin/etcdctl put foo bar
docker exec etcd-gcr-${ETCD_VER} /usr/local/bin/etcdctl get foo
``` |
| 3.7.0 | 8 Julai 2026 | — | 64-bit ZIP Maelezo ya toleoPlease check out [CHANGELOG](https://github.com/etcd-io/etcd/blob/main/CHANGELOG/CHANGELOG-3.7.md) for a full list of changes. And make sure to read [upgrade guide](https://etcd.io/docs/v3.7/upgrades/upgrade_3_7/) before upgrading etcd (there may be breaking changes).
For installation guides, please check out [operating etcd](https://etcd.io/docs/v3.7/op-guide/). Latest support status for common architectures and operating systems can be found at [supported platforms](https://etcd.io/docs/v3.7/op-guide/supported-platform/).
###### Linux
```sh
ETCD_VER=v3.7.0
# choose either URL
GOOGLE_URL=https://storage.googleapis.com/etcd
GITHUB_URL=https://github.com/etcd-io/etcd/releases/download
DOWNLOAD_URL=${GOOGLE_URL}
rm -f /tmp/etcd-${ETCD_VER}-linux-amd64.tar.gz
rm -rf /tmp/etcd-download-test && mkdir -p /tmp/etcd-download-test
curl -L ${DOWNLOAD_URL}/${ETCD_VER}/etcd-${ETCD_VER}-linux-amd64.tar.gz -o /tmp/etcd-${ETCD_VER}-linux-amd64.tar.gz
tar xzvf /tmp/etcd-${ETCD_VER}-linux-amd64.tar.gz -C /tmp/etcd-download-test --strip-components=1 --no-same-owner
rm -f /tmp/etcd-${ETCD_VER}-linux-amd64.tar.gz
/tmp/etcd-download-test/etcd --version
/tmp/etcd-download-test/etcdctl version
/tmp/etcd-download-test/etcdutl version
# start a local etcd server
/tmp/etcd-download-test/etcd
# write,read to etcd
/tmp/etcd-download-test/etcdctl --endpoints=localhost:2379 put foo bar
/tmp/etcd-download-test/etcdctl --endpoints=localhost:2379 get foo
```
###### macOS (Darwin)
```sh
ETCD_VER=v3.7.0
# choose either URL
GOOGLE_URL=https://storage.googleapis.com/etcd
GITHUB_URL=https://github.com/etcd-io/etcd/releases/download
DOWNLOAD_URL=${GOOGLE_URL}
rm -f /tmp/etcd-${ETCD_VER}-darwin-amd64.zip
rm -rf /tmp/etcd-download-test && mkdir -p /tmp/etcd-download-test
curl -L ${DOWNLOAD_URL}/${ETCD_VER}/etcd-${ETCD_VER}-darwin-amd64.zip -o /tmp/etcd-${ETCD_VER}-darwin-amd64.zip
unzip /tmp/etcd-${ETCD_VER}-darwin-amd64.zip -d /tmp && rm -f /tmp/etcd-${ETCD_VER}-darwin-amd64.zip
mv /tmp/etcd-${ETCD_VER}-darwin-amd64/* /tmp/etcd-download-test && rm -rf mv /tmp/etcd-${ETCD_VER}-darwin-amd64
/tmp/etcd-download-test/etcd --version
/tmp/etcd-download-test/etcdctl version
/tmp/etcd-download-test/etcdutl version
```
###### Docker
etcd uses [`gcr.io/etcd-development/etcd`](https://gcr.io/etcd-development/etcd) as a primary container registry, and [`quay.io/coreos/etcd`](https://quay.io/coreos/etcd) as secondary.
```sh
ETCD_VER=v3.7.0
rm -rf /tmp/etcd-data.tmp && mkdir -p /tmp/etcd-data.tmp && \
docker rmi gcr.io/etcd-development/etcd:${ETCD_VER} || true && \
docker run \
-p 2379:2379 \
-p 2380:2380 \
--mount type=bind,source=/tmp/etcd-data.tmp,destination=/etcd-data \
--name etcd-gcr-${ETCD_VER} \
gcr.io/etcd-development/etcd:${ETCD_VER} \
/usr/local/bin/etcd \
--name s1 \
--data-dir /etcd-data \
--listen-client-urls http://0.0.0.0:2379 \
--advertise-client-urls http://0.0.0.0:2379 \
--listen-peer-urls http://0.0.0.0:2380 \
--initial-advertise-peer-urls http://0.0.0.0:2380 \
--initial-cluster s1=http://0.0.0.0:2380 \
--initial-cluster-token tkn \
--initial-cluster-state new \
--log-level info \
--logger zap \
--log-outputs stderr
docker exec etcd-gcr-${ETCD_VER} /usr/local/bin/etcd --version
docker exec etcd-gcr-${ETCD_VER} /usr/local/bin/etcdctl version
docker exec etcd-gcr-${ETCD_VER} /usr/local/bin/etcdutl version
docker exec etcd-gcr-${ETCD_VER} /usr/local/bin/etcdctl endpoint health
docker exec etcd-gcr-${ETCD_VER} /usr/local/bin/etcdctl put foo bar
docker exec etcd-gcr-${ETCD_VER} /usr/local/bin/etcdctl get foo
``` |
| 3.6.13 | 1 Julai 2026 | — | 64-bit ZIP Maelezo ya toleoPlease check out [CHANGELOG](https://github.com/etcd-io/etcd/blob/main/CHANGELOG/CHANGELOG-3.6.md) for a full list of changes. And make sure to read [upgrade guide](https://etcd.io/docs/v3.6/upgrades/upgrade_3_6/) before upgrading etcd (there may be breaking changes).
For installation guides, please check out [play.etcd.io](http://play.etcd.io) and [operating etcd](https://etcd.io/docs/v3.6/op-guide/). Latest support status for common architectures and operating systems can be found at [supported platforms](https://etcd.io/docs/v3.6/op-guide/supported-platform/).
###### Linux
```sh
ETCD_VER=v3.6.13
# choose either URL
GOOGLE_URL=https://storage.googleapis.com/etcd
GITHUB_URL=https://github.com/etcd-io/etcd/releases/download
DOWNLOAD_URL=${GOOGLE_URL}
rm -f /tmp/etcd-${ETCD_VER}-linux-amd64.tar.gz
rm -rf /tmp/etcd-download-test && mkdir -p /tmp/etcd-download-test
curl -L ${DOWNLOAD_URL}/${ETCD_VER}/etcd-${ETCD_VER}-linux-amd64.tar.gz -o /tmp/etcd-${ETCD_VER}-linux-amd64.tar.gz
tar xzvf /tmp/etcd-${ETCD_VER}-linux-amd64.tar.gz -C /tmp/etcd-download-test --strip-components=1 --no-same-owner
rm -f /tmp/etcd-${ETCD_VER}-linux-amd64.tar.gz
/tmp/etcd-download-test/etcd --version
/tmp/etcd-download-test/etcdctl version
/tmp/etcd-download-test/etcdutl version
# start a local etcd server
/tmp/etcd-download-test/etcd
# write,read to etcd
/tmp/etcd-download-test/etcdctl --endpoints=localhost:2379 put foo bar
/tmp/etcd-download-test/etcdctl --endpoints=localhost:2379 get foo
```
###### macOS (Darwin)
```sh
ETCD_VER=v3.6.13
# choose either URL
GOOGLE_URL=https://storage.googleapis.com/etcd
GITHUB_URL=https://github.com/etcd-io/etcd/releases/download
DOWNLOAD_URL=${GOOGLE_URL}
rm -f /tmp/etcd-${ETCD_VER}-darwin-amd64.zip
rm -rf /tmp/etcd-download-test && mkdir -p /tmp/etcd-download-test
curl -L ${DOWNLOAD_URL}/${ETCD_VER}/etcd-${ETCD_VER}-darwin-amd64.zip -o /tmp/etcd-${ETCD_VER}-darwin-amd64.zip
unzip /tmp/etcd-${ETCD_VER}-darwin-amd64.zip -d /tmp && rm -f /tmp/etcd-${ETCD_VER}-darwin-amd64.zip
mv /tmp/etcd-${ETCD_VER}-darwin-amd64/* /tmp/etcd-download-test && rm -rf mv /tmp/etcd-${ETCD_VER}-darwin-amd64
/tmp/etcd-download-test/etcd --version
/tmp/etcd-download-test/etcdctl version
/tmp/etcd-download-test/etcdutl version
```
###### Docker
etcd uses [`gcr.io/etcd-development/etcd`](https://gcr.io/etcd-development/etcd) as a primary container registry, and [`quay.io/coreos/etcd`](https://quay.io/coreos/etcd) as secondary.
```sh
ETCD_VER=v3.6.13
rm -rf /tmp/etcd-data.tmp && mkdir -p /tmp/etcd-data.tmp && \
docker rmi gcr.io/etcd-development/etcd:${ETCD_VER} || true && \
docker run \
-p 2379:2379 \
-p 2380:2380 \
--mount type=bind,source=/tmp/etcd-data.tmp,destination=/etcd-data \
--name etcd-gcr-${ETCD_VER} \
gcr.io/etcd-development/etcd:${ETCD_VER} \
/usr/local/bin/etcd \
--name s1 \
--data-dir /etcd-data \
--listen-client-urls http://0.0.0.0:2379 \
--advertise-client-urls http://0.0.0.0:2379 \
--listen-peer-urls http://0.0.0.0:2380 \
--initial-advertise-peer-urls http://0.0.0.0:2380 \
--initial-cluster s1=http://0.0.0.0:2380 \
--initial-cluster-token tkn \
--initial-cluster-state new \
--log-level info \
--logger zap \
--log-outputs stderr
docker exec etcd-gcr-${ETCD_VER} /usr/local/bin/etcd --version
docker exec etcd-gcr-${ETCD_VER} /usr/local/bin/etcdctl version
docker exec etcd-gcr-${ETCD_VER} /usr/local/bin/etcdutl version
docker exec etcd-gcr-${ETCD_VER} /usr/local/bin/etcdctl endpoint health
docker exec etcd-gcr-${ETCD_VER} /usr/local/bin/etcdctl put foo bar
docker exec etcd-gcr-${ETCD_VER} /usr/local/bin/etcdctl get foo
``` |
| 3.6.12 | 1 Juni 2026 | — | 64-bit ZIP Maelezo ya toleoPlease check out [CHANGELOG](https://github.com/etcd-io/etcd/blob/main/CHANGELOG/CHANGELOG-3.6.md) for a full list of changes. And make sure to read [upgrade guide](https://etcd.io/docs/v3.6/upgrades/upgrade_3_6/) before upgrading etcd (there may be breaking changes).
For installation guides, please check out [operating etcd](https://etcd.io/docs/v3.6/op-guide/). Latest support status for common architectures and operating systems can be found at [supported platforms](https://etcd.io/docs/v3.6/op-guide/supported-platform/).
###### Linux
```sh
ETCD_VER=v3.6.12
# choose either URL
GOOGLE_URL=https://storage.googleapis.com/etcd
GITHUB_URL=https://github.com/etcd-io/etcd/releases/download
DOWNLOAD_URL=${GOOGLE_URL}
rm -f /tmp/etcd-${ETCD_VER}-linux-amd64.tar.gz
rm -rf /tmp/etcd-download-test && mkdir -p /tmp/etcd-download-test
curl -L ${DOWNLOAD_URL}/${ETCD_VER}/etcd-${ETCD_VER}-linux-amd64.tar.gz -o /tmp/etcd-${ETCD_VER}-linux-amd64.tar.gz
tar xzvf /tmp/etcd-${ETCD_VER}-linux-amd64.tar.gz -C /tmp/etcd-download-test --strip-components=1 --no-same-owner
rm -f /tmp/etcd-${ETCD_VER}-linux-amd64.tar.gz
/tmp/etcd-download-test/etcd --version
/tmp/etcd-download-test/etcdctl version
/tmp/etcd-download-test/etcdutl version
# start a local etcd server
/tmp/etcd-download-test/etcd
# write,read to etcd
/tmp/etcd-download-test/etcdctl --endpoints=localhost:2379 put foo bar
/tmp/etcd-download-test/etcdctl --endpoints=localhost:2379 get foo
```
###### macOS (Darwin)
```sh
ETCD_VER=v3.6.12
# choose either URL
GOOGLE_URL=https://storage.googleapis.com/etcd
GITHUB_URL=https://github.com/etcd-io/etcd/releases/download
DOWNLOAD_URL=${GOOGLE_URL}
rm -f /tmp/etcd-${ETCD_VER}-darwin-amd64.zip
rm -rf /tmp/etcd-download-test && mkdir -p /tmp/etcd-download-test
curl -L ${DOWNLOAD_URL}/${ETCD_VER}/etcd-${ETCD_VER}-darwin-amd64.zip -o /tmp/etcd-${ETCD_VER}-darwin-amd64.zip
unzip /tmp/etcd-${ETCD_VER}-darwin-amd64.zip -d /tmp && rm -f /tmp/etcd-${ETCD_VER}-darwin-amd64.zip
mv /tmp/etcd-${ETCD_VER}-darwin-amd64/* /tmp/etcd-download-test && rm -rf mv /tmp/etcd-${ETCD_VER}-darwin-amd64
/tmp/etcd-download-test/etcd --version
/tmp/etcd-download-test/etcdctl version
/tmp/etcd-download-test/etcdutl version
```
###### Docker
etcd uses [`gcr.io/etcd-development/etcd`](https://gcr.io/etcd-development/etcd) as a primary container registry, and [`quay.io/coreos/etcd`](https://quay.io/coreos/etcd) as secondary.
```sh
ETCD_VER=v3.6.12
rm -rf /tmp/etcd-data.tmp && mkdir -p /tmp/etcd-data.tmp && \
docker rmi gcr.io/etcd-development/etcd:${ETCD_VER} || true && \
docker run \
-p 2379:2379 \
-p 2380:2380 \
--mount type=bind,source=/tmp/etcd-data.tmp,destination=/etcd-data \
--name etcd-gcr-${ETCD_VER} \
gcr.io/etcd-development/etcd:${ETCD_VER} \
/usr/local/bin/etcd \
--name s1 \
--data-dir /etcd-data \
--listen-client-urls http://0.0.0.0:2379 \
--advertise-client-urls http://0.0.0.0:2379 \
--listen-peer-urls http://0.0.0.0:2380 \
--initial-advertise-peer-urls http://0.0.0.0:2380 \
--initial-cluster s1=http://0.0.0.0:2380 \
--initial-cluster-token tkn \
--initial-cluster-state new \
--log-level info \
--logger zap \
--log-outputs stderr
docker exec etcd-gcr-${ETCD_VER} /usr/local/bin/etcd --version
docker exec etcd-gcr-${ETCD_VER} /usr/local/bin/etcdctl version
docker exec etcd-gcr-${ETCD_VER} /usr/local/bin/etcdutl version
docker exec etcd-gcr-${ETCD_VER} /usr/local/bin/etcdctl endpoint health
docker exec etcd-gcr-${ETCD_VER} /usr/local/bin/etcdctl put foo bar
docker exec etcd-gcr-${ETCD_VER} /usr/local/bin/etcdctl get foo
``` |
| 3.6.11 | 1 Mei 2026 | — | 64-bit ZIP Maelezo ya toleoPlease check out [CHANGELOG](https://github.com/etcd-io/etcd/blob/main/CHANGELOG/CHANGELOG-3.6.md) for a full list of changes. And make sure to read [upgrade guide](https://etcd.io/docs/v3.6/upgrades/upgrade_3_6/) before upgrading etcd (there may be breaking changes).
For installation guides, please check out [play.etcd.io](http://play.etcd.io) and [operating etcd](https://etcd.io/docs/v3.6/op-guide/). Latest support status for common architectures and operating systems can be found at [supported platforms](https://etcd.io/docs/v3.6/op-guide/supported-platform/).
###### Linux
```sh
ETCD_VER=v3.6.11
# choose either URL
GOOGLE_URL=https://storage.googleapis.com/etcd
GITHUB_URL=https://github.com/etcd-io/etcd/releases/download
DOWNLOAD_URL=${GOOGLE_URL}
rm -f /tmp/etcd-${ETCD_VER}-linux-amd64.tar.gz
rm -rf /tmp/etcd-download-test && mkdir -p /tmp/etcd-download-test
curl -L ${DOWNLOAD_URL}/${ETCD_VER}/etcd-${ETCD_VER}-linux-amd64.tar.gz -o /tmp/etcd-${ETCD_VER}-linux-amd64.tar.gz
tar xzvf /tmp/etcd-${ETCD_VER}-linux-amd64.tar.gz -C /tmp/etcd-download-test --strip-components=1 --no-same-owner
rm -f /tmp/etcd-${ETCD_VER}-linux-amd64.tar.gz
/tmp/etcd-download-test/etcd --version
/tmp/etcd-download-test/etcdctl version
/tmp/etcd-download-test/etcdutl version
# start a local etcd server
/tmp/etcd-download-test/etcd
# write,read to etcd
/tmp/etcd-download-test/etcdctl --endpoints=localhost:2379 put foo bar
/tmp/etcd-download-test/etcdctl --endpoints=localhost:2379 get foo
```
###### macOS (Darwin)
```sh
ETCD_VER=v3.6.11
# choose either URL
GOOGLE_URL=https://storage.googleapis.com/etcd
GITHUB_URL=https://github.com/etcd-io/etcd/releases/download
DOWNLOAD_URL=${GOOGLE_URL}
rm -f /tmp/etcd-${ETCD_VER}-darwin-amd64.zip
rm -rf /tmp/etcd-download-test && mkdir -p /tmp/etcd-download-test
curl -L ${DOWNLOAD_URL}/${ETCD_VER}/etcd-${ETCD_VER}-darwin-amd64.zip -o /tmp/etcd-${ETCD_VER}-darwin-amd64.zip
unzip /tmp/etcd-${ETCD_VER}-darwin-amd64.zip -d /tmp && rm -f /tmp/etcd-${ETCD_VER}-darwin-amd64.zip
mv /tmp/etcd-${ETCD_VER}-darwin-amd64/* /tmp/etcd-download-test && rm -rf mv /tmp/etcd-${ETCD_VER}-darwin-amd64
/tmp/etcd-download-test/etcd --version
/tmp/etcd-download-test/etcdctl version
/tmp/etcd-download-test/etcdutl version
```
###### Docker
etcd uses [`gcr.io/etcd-development/etcd`](https://gcr.io/etcd-development/etcd) as a primary container registry, and [`quay.io/coreos/etcd`](https://quay.io/coreos/etcd) as secondary.
```sh
ETCD_VER=v3.6.11
rm -rf /tmp/etcd-data.tmp && mkdir -p /tmp/etcd-data.tmp && \
docker rmi gcr.io/etcd-development/etcd:${ETCD_VER} || true && \
docker run \
-p 2379:2379 \
-p 2380:2380 \
--mount type=bind,source=/tmp/etcd-data.tmp,destination=/etcd-data \
--name etcd-gcr-${ETCD_VER} \
gcr.io/etcd-development/etcd:${ETCD_VER} \
/usr/local/bin/etcd \
--name s1 \
--data-dir /etcd-data \
--listen-client-urls http://0.0.0.0:2379 \
--advertise-client-urls http://0.0.0.0:2379 \
--listen-peer-urls http://0.0.0.0:2380 \
--initial-advertise-peer-urls http://0.0.0.0:2380 \
--initial-cluster s1=http://0.0.0.0:2380 \
--initial-cluster-token tkn \
--initial-cluster-state new \
--log-level info \
--logger zap \
--log-outputs stderr
docker exec etcd-gcr-${ETCD_VER} /usr/local/bin/etcd --version
docker exec etcd-gcr-${ETCD_VER} /usr/local/bin/etcdctl version
docker exec etcd-gcr-${ETCD_VER} /usr/local/bin/etcdutl version
docker exec etcd-gcr-${ETCD_VER} /usr/local/bin/etcdctl endpoint health
docker exec etcd-gcr-${ETCD_VER} /usr/local/bin/etcdctl put foo bar
docker exec etcd-gcr-${ETCD_VER} /usr/local/bin/etcdctl get foo
``` |
| 3.6.10 | 1 Aprili 2026 | — | 64-bit ZIP Maelezo ya toleoPlease check out CHANGELOG for a full list of changes. And make sure to read upgrade guide before upgrading etcd (there may be breaking changes).
For installation guides, please check out play.etcd.io and operating etcd. Latest support status for common architectures and operating systems can be found at supported platforms.
Linux
ETCD_VER=v3.6.10
# choose either URL
GOOGLE_URL=https://storage.googleapis.com/etcd
GITHUB_URL=https://github.com/etcd-io/etcd/releases/download
DOWNLOAD_URL=${GOOGLE_URL}
rm -f /tmp/etcd-${ETCD_VER}-linux-amd64.tar.gz
rm -rf /tmp/etcd-download-test && mkdir -p /tmp/etcd-download-test
curl -L ${DOWNLOAD_URL}/${ETCD_VER}/etcd-${ETCD_VER}-linux-amd64.tar.gz -o /tmp/etcd-${ETCD_VER}-linux-amd64.tar.gz
tar xzvf /tmp/etcd-${ETCD_VER}-linux-amd64.tar.gz -C /tmp/etcd-download-test --strip-components=1 --no-same-owner
rm -f /tmp/etcd-${ETCD_VER}-linux-amd64.tar.gz
/tmp/etcd-download-test/etcd --version
/tmp/etcd-download-test/etcdctl version
/tmp/etcd-download-test/etcdutl version
# start a local etcd server
/tmp/etcd-download-test/etcd
# write,read to etcd
/tmp/etcd-download-test/etcdctl --endpoints=localhost:2379 put foo bar
/tmp/etcd-download-test/etcdctl --endpoints=localhost:2379 get foo
macOS (Darwin)
ETCD_VER=v3.6.10
# choose either URL
GOOGLE_URL=https://storage.googleapis.com/etcd
GITHUB_URL=https://github.com/etcd-io/etcd/releases/download
DOWNLOAD_URL=${GOOGLE_URL}
rm -f /tmp/etcd-${ETCD_VER}-darwin-amd64.zip
rm -rf /tmp/etcd-download-test && mkdir -p /tmp/etcd-download-test
curl -L ${DOWNLOAD_URL}/${ETCD_VER}/etcd-${ETCD_VER}-darwin-amd64.zip -o /tmp/etcd-${ETCD_VER}-darwin-amd64.zip
unzip /tmp/etcd-${ETCD_VER}-darwin-amd64.zip -d /tmp && rm -f /tmp/etcd-${ETCD_VER}-darwin-amd64.zip
mv /tmp/etcd-${ETCD_VER}-darwin-amd64/* /tmp/etcd-download-test && rm -rf mv /tmp/etcd-${ETCD_VER}-darwin-amd64
/tmp/etcd-download-test/etcd --version
/tmp/etcd-download-test/etcdctl version
/tmp/etcd-download-test/etcdutl version
Docker
etcd uses gcr.io/etcd-development/etcd as a primary container registry, and quay.io/coreos/etcd as secondary.
ETCD_VER=v3.6.10
rm -rf /tmp/etcd-data.tmp && mkdir -p /tmp/etcd-data.tmp && \
docker rmi gcr.io/etcd-development/etcd:${ETCD_VER} || true && \
docker run \
-p 2379:2379 \
-p 2380:2380 \
--mount type=bind,source=/tmp/etcd-data.tmp,destination=/etcd-data \
--name etcd-gcr-${ETCD_VER} \
gcr.io/etcd-development/etcd:${ETCD_VER} \
/usr/local/bin/etcd \
--name s1 \
--data-dir /etcd-data \
--listen-client-urls http://0.0.0.0:2379 \
--advertise-client-urls http://0.0.0.0:2379 \
--listen-peer-urls http://0.0.0.0:2380 \
--initial-advertise-peer-urls http://0.0.0.0:2380 \
--initial-cluster s1=http://0.0.0.0:2380 \
--initial-cluster-token tkn \
--initial-cluster-state new \
--log-level info \
--logger zap \
--log-outputs stderr
docker exec etcd-gcr-${ETCD_VER} /usr/local/bin/etcd --version
docker exec etcd-gcr-${ETCD_VER} /usr/local/bin/etcdctl version
docker exec etcd-gcr-${ETCD_VER} /usr/local/bin/etcdutl version
docker exec etcd-gcr-${ETCD_VER} /usr/local/bin/etcdctl endpoint health
docker exec etcd-gcr-${ETCD_VER} /usr/local/bin/etcdctl put foo bar
docker exec etcd-gcr-${ETCD_VER} /usr/local/bin/etcdctl get foo |
| 3.6.9 | 20 Machi 2026 | — | 64-bit ZIP Maelezo ya toleoPlease check out CHANGELOG for a full list of changes. And make sure to read upgrade guide before upgrading etcd (there may be breaking changes).
For installation guides, please check out play.etcd.io and operating etcd. Latest support status for common architectures and operating systems can be found at supported platforms.
Linux
ETCD_VER=v3.6.9
# choose either URL
GOOGLE_URL=https://storage.googleapis.com/etcd
GITHUB_URL=https://github.com/etcd-io/etcd/releases/download
DOWNLOAD_URL=${GOOGLE_URL}
rm -f /tmp/etcd-${ETCD_VER}-linux-amd64.tar.gz
rm -rf /tmp/etcd-download-test && mkdir -p /tmp/etcd-download-test
curl -L ${DOWNLOAD_URL}/${ETCD_VER}/etcd-${ETCD_VER}-linux-amd64.tar.gz -o /tmp/etcd-${ETCD_VER}-linux-amd64.tar.gz
tar xzvf /tmp/etcd-${ETCD_VER}-linux-amd64.tar.gz -C /tmp/etcd-download-test --strip-components=1 --no-same-owner
rm -f /tmp/etcd-${ETCD_VER}-linux-amd64.tar.gz
/tmp/etcd-download-test/etcd --version
/tmp/etcd-download-test/etcdctl version
/tmp/etcd-download-test/etcdutl version
# start a local etcd server
/tmp/etcd-download-test/etcd
# write,read to etcd
/tmp/etcd-download-test/etcdctl --endpoints=localhost:2379 put foo bar
/tmp/etcd-download-test/etcdctl --endpoints=localhost:2379 get foo
macOS (Darwin)
ETCD_VER=v3.6.9
# choose either URL
GOOGLE_URL=https://storage.googleapis.com/etcd
GITHUB_URL=https://github.com/etcd-io/etcd/releases/download
DOWNLOAD_URL=${GOOGLE_URL}
rm -f /tmp/etcd-${ETCD_VER}-darwin-amd64.zip
rm -rf /tmp/etcd-download-test && mkdir -p /tmp/etcd-download-test
curl -L ${DOWNLOAD_URL}/${ETCD_VER}/etcd-${ETCD_VER}-darwin-amd64.zip -o /tmp/etcd-${ETCD_VER}-darwin-amd64.zip
unzip /tmp/etcd-${ETCD_VER}-darwin-amd64.zip -d /tmp && rm -f /tmp/etcd-${ETCD_VER}-darwin-amd64.zip
mv /tmp/etcd-${ETCD_VER}-darwin-amd64/* /tmp/etcd-download-test && rm -rf mv /tmp/etcd-${ETCD_VER}-darwin-amd64
/tmp/etcd-download-test/etcd --version
/tmp/etcd-download-test/etcdctl version
/tmp/etcd-download-test/etcdutl version
Docker
etcd uses gcr.io/etcd-development/etcd as a primary container registry, and quay.io/coreos/etcd as secondary.
ETCD_VER=v3.6.9
rm -rf /tmp/etcd-data.tmp && mkdir -p /tmp/etcd-data.tmp && \
docker rmi gcr.io/etcd-development/etcd:${ETCD_VER} || true && \
docker run \
-p 2379:2379 \
-p 2380:2380 \
--mount type=bind,source=/tmp/etcd-data.tmp,destination=/etcd-data \
--name etcd-gcr-${ETCD_VER} \
gcr.io/etcd-development/etcd:${ETCD_VER} \
/usr/local/bin/etcd \
--name s1 \
--data-dir /etcd-data \
--listen-client-urls http://0.0.0.0:2379 \
--advertise-client-urls http://0.0.0.0:2379 \
--listen-peer-urls http://0.0.0.0:2380 \
--initial-advertise-peer-urls http://0.0.0.0:2380 \
--initial-cluster s1=http://0.0.0.0:2380 \
--initial-cluster-token tkn \
--initial-cluster-state new \
--log-level info \
--logger zap \
--log-outputs stderr
docker exec etcd-gcr-${ETCD_VER} /usr/local/bin/etcd --version
docker exec etcd-gcr-${ETCD_VER} /usr/local/bin/etcdctl version
docker exec etcd-gcr-${ETCD_VER} /usr/local/bin/etcdutl version
docker exec etcd-gcr-${ETCD_VER} /usr/local/bin/etcdctl endpoint health
docker exec etcd-gcr-${ETCD_VER} /usr/local/bin/etcdctl put foo bar
docker exec etcd-gcr-${ETCD_VER} /usr/local/bin/etcdctl get foo |
| 3.6.8 | 13 Februari 2026 | — | 64-bit ZIP Maelezo ya toleoPlease check out CHANGELOG for a full list of changes. And make sure to read upgrade guide before upgrading etcd (there may be breaking changes).
For installation guides, please check out play.etcd.io and operating etcd. Latest support status for common architectures and operating systems can be found at supported platforms.
Linux
ETCD_VER=v3.6.8
# choose either URL
GOOGLE_URL=https://storage.googleapis.com/etcd
GITHUB_URL=https://github.com/etcd-io/etcd/releases/download
DOWNLOAD_URL=${GOOGLE_URL}
rm -f /tmp/etcd-${ETCD_VER}-linux-amd64.tar.gz
rm -rf /tmp/etcd-download-test && mkdir -p /tmp/etcd-download-test
curl -L ${DOWNLOAD_URL}/${ETCD_VER}/etcd-${ETCD_VER}-linux-amd64.tar.gz -o /tmp/etcd-${ETCD_VER}-linux-amd64.tar.gz
tar xzvf /tmp/etcd-${ETCD_VER}-linux-amd64.tar.gz -C /tmp/etcd-download-test --strip-components=1 --no-same-owner
rm -f /tmp/etcd-${ETCD_VER}-linux-amd64.tar.gz
/tmp/etcd-download-test/etcd --version
/tmp/etcd-download-test/etcdctl version
/tmp/etcd-download-test/etcdutl version
# start a local etcd server
/tmp/etcd-download-test/etcd
# write,read to etcd
/tmp/etcd-download-test/etcdctl --endpoints=localhost:2379 put foo bar
/tmp/etcd-download-test/etcdctl --endpoints=localhost:2379 get foo
macOS (Darwin)
ETCD_VER=v3.6.8
# choose either URL
GOOGLE_URL=https://storage.googleapis.com/etcd
GITHUB_URL=https://github.com/etcd-io/etcd/releases/download
DOWNLOAD_URL=${GOOGLE_URL}
rm -f /tmp/etcd-${ETCD_VER}-darwin-amd64.zip
rm -rf /tmp/etcd-download-test && mkdir -p /tmp/etcd-download-test
curl -L ${DOWNLOAD_URL}/${ETCD_VER}/etcd-${ETCD_VER}-darwin-amd64.zip -o /tmp/etcd-${ETCD_VER}-darwin-amd64.zip
unzip /tmp/etcd-${ETCD_VER}-darwin-amd64.zip -d /tmp && rm -f /tmp/etcd-${ETCD_VER}-darwin-amd64.zip
mv /tmp/etcd-${ETCD_VER}-darwin-amd64/* /tmp/etcd-download-test && rm -rf mv /tmp/etcd-${ETCD_VER}-darwin-amd64
/tmp/etcd-download-test/etcd --version
/tmp/etcd-download-test/etcdctl version
/tmp/etcd-download-test/etcdutl version
Docker
etcd uses gcr.io/etcd-development/etcd as a primary container registry, and quay.io/coreos/etcd as secondary.
ETCD_VER=v3.6.8
rm -rf /tmp/etcd-data.tmp && mkdir -p /tmp/etcd-data.tmp && \
docker rmi gcr.io/etcd-development/etcd:${ETCD_VER} || true && \
docker run \
-p 2379:2379 \
-p 2380:2380 \
--mount type=bind,source=/tmp/etcd-data.tmp,destination=/etcd-data \
--name etcd-gcr-${ETCD_VER} \
gcr.io/etcd-development/etcd:${ETCD_VER} \
/usr/local/bin/etcd \
--name s1 \
--data-dir /etcd-data \
--listen-client-urls http://0.0.0.0:2379 \
--advertise-client-urls http://0.0.0.0:2379 \
--listen-peer-urls http://0.0.0.0:2380 \
--initial-advertise-peer-urls http://0.0.0.0:2380 \
--initial-cluster s1=http://0.0.0.0:2380 \
--initial-cluster-token tkn \
--initial-cluster-state new \
--log-level info \
--logger zap \
--log-outputs stderr
docker exec etcd-gcr-${ETCD_VER} /usr/local/bin/etcd --version
docker exec etcd-gcr-${ETCD_VER} /usr/local/bin/etcdctl version
docker exec etcd-gcr-${ETCD_VER} /usr/local/bin/etcdutl version
docker exec etcd-gcr-${ETCD_VER} /usr/local/bin/etcdctl endpoint health
docker exec etcd-gcr-${ETCD_VER} /usr/local/bin/etcdctl put foo bar
docker exec etcd-gcr-${ETCD_VER} /usr/local/bin/etcdctl get foo |
| 3.6.7 | 17 Desemba 2025 | — | 64-bit ZIP Maelezo ya toleoPlease check out CHANGELOG for a full list of changes. And make sure to read upgrade guide before upgrading etcd (there may be breaking changes).
For installation guides, please check out play.etcd.io and operating etcd. Latest support status for common architectures and operating systems can be found at supported platforms.
Linux
ETCD_VER=v3.6.7
# choose either URL
GOOGLE_URL=https://storage.googleapis.com/etcd
GITHUB_URL=https://github.com/etcd-io/etcd/releases/download
DOWNLOAD_URL=${GOOGLE_URL}
rm -f /tmp/etcd-${ETCD_VER}-linux-amd64.tar.gz
rm -rf /tmp/etcd-download-test && mkdir -p /tmp/etcd-download-test
curl -L ${DOWNLOAD_URL}/${ETCD_VER}/etcd-${ETCD_VER}-linux-amd64.tar.gz -o /tmp/etcd-${ETCD_VER}-linux-amd64.tar.gz
tar xzvf /tmp/etcd-${ETCD_VER}-linux-amd64.tar.gz -C /tmp/etcd-download-test --strip-components=1 --no-same-owner
rm -f /tmp/etcd-${ETCD_VER}-linux-amd64.tar.gz
/tmp/etcd-download-test/etcd --version
/tmp/etcd-download-test/etcdctl version
/tmp/etcd-download-test/etcdutl version
# start a local etcd server
/tmp/etcd-download-test/etcd
# write,read to etcd
/tmp/etcd-download-test/etcdctl --endpoints=localhost:2379 put foo bar
/tmp/etcd-download-test/etcdctl --endpoints=localhost:2379 get foo
macOS (Darwin)
ETCD_VER=v3.6.7
# choose either URL
GOOGLE_URL=https://storage.googleapis.com/etcd
GITHUB_URL=https://github.com/etcd-io/etcd/releases/download
DOWNLOAD_URL=${GOOGLE_URL}
rm -f /tmp/etcd-${ETCD_VER}-darwin-amd64.zip
rm -rf /tmp/etcd-download-test && mkdir -p /tmp/etcd-download-test
curl -L ${DOWNLOAD_URL}/${ETCD_VER}/etcd-${ETCD_VER}-darwin-amd64.zip -o /tmp/etcd-${ETCD_VER}-darwin-amd64.zip
unzip /tmp/etcd-${ETCD_VER}-darwin-amd64.zip -d /tmp && rm -f /tmp/etcd-${ETCD_VER}-darwin-amd64.zip
mv /tmp/etcd-${ETCD_VER}-darwin-amd64/* /tmp/etcd-download-test && rm -rf mv /tmp/etcd-${ETCD_VER}-darwin-amd64
/tmp/etcd-download-test/etcd --version
/tmp/etcd-download-test/etcdctl version
/tmp/etcd-download-test/etcdutl version
Docker
etcd uses gcr.io/etcd-development/etcd as a primary container registry, and quay.io/coreos/etcd as secondary.
ETCD_VER=v3.6.7
rm -rf /tmp/etcd-data.tmp && mkdir -p /tmp/etcd-data.tmp && \
docker rmi gcr.io/etcd-development/etcd:${ETCD_VER} || true && \
docker run \
-p 2379:2379 \
-p 2380:2380 \
--mount type=bind,source=/tmp/etcd-data.tmp,destination=/etcd-data \
--name etcd-gcr-${ETCD_VER} \
gcr.io/etcd-development/etcd:${ETCD_VER} \
/usr/local/bin/etcd \
--name s1 \
--data-dir /etcd-data \
--listen-client-urls http://0.0.0.0:2379 \
--advertise-client-urls http://0.0.0.0:2379 \
--listen-peer-urls http://0.0.0.0:2380 \
--initial-advertise-peer-urls http://0.0.0.0:2380 \
--initial-cluster s1=http://0.0.0.0:2380 \
--initial-cluster-token tkn \
--initial-cluster-state new \
--log-level info \
--logger zap \
--log-outputs stderr
docker exec etcd-gcr-${ETCD_VER} /usr/local/bin/etcd --version
docker exec etcd-gcr-${ETCD_VER} /usr/local/bin/etcdctl version
docker exec etcd-gcr-${ETCD_VER} /usr/local/bin/etcdutl version
docker exec etcd-gcr-${ETCD_VER} /usr/local/bin/etcdctl endpoint health
docker exec etcd-gcr-${ETCD_VER} /usr/local/bin/etcdctl put foo bar
docker exec etcd-gcr-${ETCD_VER} /usr/local/bin/etcdctl get foo |
| 3.6.6 | 12 Novemba 2025 | — | 64-bit ZIP Maelezo ya toleoPlease check out CHANGELOG for a full list of changes. And make sure to read upgrade guide before upgrading etcd (there may be breaking changes).
For installation guides, please check out play.etcd.io and operating etcd. Latest support status for common architectures and operating systems can be found at supported platforms.
Linux
ETCD_VER=v3.6.6
# choose either URL
GOOGLE_URL=https://storage.googleapis.com/etcd
GITHUB_URL=https://github.com/etcd-io/etcd/releases/download
DOWNLOAD_URL=${GOOGLE_URL}
rm -f /tmp/etcd-${ETCD_VER}-linux-amd64.tar.gz
rm -rf /tmp/etcd-download-test && mkdir -p /tmp/etcd-download-test
curl -L ${DOWNLOAD_URL}/${ETCD_VER}/etcd-${ETCD_VER}-linux-amd64.tar.gz -o /tmp/etcd-${ETCD_VER}-linux-amd64.tar.gz
tar xzvf /tmp/etcd-${ETCD_VER}-linux-amd64.tar.gz -C /tmp/etcd-download-test --strip-components=1 --no-same-owner
rm -f /tmp/etcd-${ETCD_VER}-linux-amd64.tar.gz
/tmp/etcd-download-test/etcd --version
/tmp/etcd-download-test/etcdctl version
/tmp/etcd-download-test/etcdutl version
# start a local etcd server
/tmp/etcd-download-test/etcd
# write,read to etcd
/tmp/etcd-download-test/etcdctl --endpoints=localhost:2379 put foo bar
/tmp/etcd-download-test/etcdctl --endpoints=localhost:2379 get foo
macOS (Darwin)
ETCD_VER=v3.6.6
# choose either URL
GOOGLE_URL=https://storage.googleapis.com/etcd
GITHUB_URL=https://github.com/etcd-io/etcd/releases/download
DOWNLOAD_URL=${GOOGLE_URL}
rm -f /tmp/etcd-${ETCD_VER}-darwin-amd64.zip
rm -rf /tmp/etcd-download-test && mkdir -p /tmp/etcd-download-test
curl -L ${DOWNLOAD_URL}/${ETCD_VER}/etcd-${ETCD_VER}-darwin-amd64.zip -o /tmp/etcd-${ETCD_VER}-darwin-amd64.zip
unzip /tmp/etcd-${ETCD_VER}-darwin-amd64.zip -d /tmp && rm -f /tmp/etcd-${ETCD_VER}-darwin-amd64.zip
mv /tmp/etcd-${ETCD_VER}-darwin-amd64/* /tmp/etcd-download-test && rm -rf mv /tmp/etcd-${ETCD_VER}-darwin-amd64
/tmp/etcd-download-test/etcd --version
/tmp/etcd-download-test/etcdctl version
/tmp/etcd-download-test/etcdutl version
Docker
etcd uses gcr.io/etcd-development/etcd as a primary container registry, and quay.io/coreos/etcd as secondary.
ETCD_VER=v3.6.6
rm -rf /tmp/etcd-data.tmp && mkdir -p /tmp/etcd-data.tmp && \
docker rmi gcr.io/etcd-development/etcd:${ETCD_VER} || true && \
docker run \
-p 2379:2379 \
-p 2380:2380 \
--mount type=bind,source=/tmp/etcd-data.tmp,destination=/etcd-data \
--name etcd-gcr-${ETCD_VER} \
gcr.io/etcd-development/etcd:${ETCD_VER} \
/usr/local/bin/etcd \
--name s1 \
--data-dir /etcd-data \
--listen-client-urls http://0.0.0.0:2379 \
--advertise-client-urls http://0.0.0.0:2379 \
--listen-peer-urls http://0.0.0.0:2380 \
--initial-advertise-peer-urls http://0.0.0.0:2380 \
--initial-cluster s1=http://0.0.0.0:2380 \
--initial-cluster-token tkn \
--initial-cluster-state new \
--log-level info \
--logger zap \
--log-outputs stderr
docker exec etcd-gcr-${ETCD_VER} /usr/local/bin/etcd --version
docker exec etcd-gcr-${ETCD_VER} /usr/local/bin/etcdctl version
docker exec etcd-gcr-${ETCD_VER} /usr/local/bin/etcdutl version
docker exec etcd-gcr-${ETCD_VER} /usr/local/bin/etcdctl endpoint health
docker exec etcd-gcr-${ETCD_VER} /usr/local/bin/etcdctl put foo bar
docker exec etcd-gcr-${ETCD_VER} /usr/local/bin/etcdctl get foo |
| 3.6.5 | 19 Septemba 2025 | — | 64-bit ZIP Maelezo ya toleoPlease check out CHANGELOG for a full list of changes. And make sure to read upgrade guide before upgrading etcd (there may be breaking changes).
For installation guides, please check out play.etcd.io and operating etcd. Latest support status for common architectures and operating systems can be found at supported platforms.
Linux
ETCD_VER=v3.6.5
# choose either URL
GOOGLE_URL=https://storage.googleapis.com/etcd
GITHUB_URL=https://github.com/etcd-io/etcd/releases/download
DOWNLOAD_URL=${GOOGLE_URL}
rm -f /tmp/etcd-${ETCD_VER}-linux-amd64.tar.gz
rm -rf /tmp/etcd-download-test && mkdir -p /tmp/etcd-download-test
curl -L ${DOWNLOAD_URL}/${ETCD_VER}/etcd-${ETCD_VER}-linux-amd64.tar.gz -o /tmp/etcd-${ETCD_VER}-linux-amd64.tar.gz
tar xzvf /tmp/etcd-${ETCD_VER}-linux-amd64.tar.gz -C /tmp/etcd-download-test --strip-components=1 --no-same-owner
rm -f /tmp/etcd-${ETCD_VER}-linux-amd64.tar.gz
/tmp/etcd-download-test/etcd --version
/tmp/etcd-download-test/etcdctl version
/tmp/etcd-download-test/etcdutl version
# start a local etcd server
/tmp/etcd-download-test/etcd
# write,read to etcd
/tmp/etcd-download-test/etcdctl --endpoints=localhost:2379 put foo bar
/tmp/etcd-download-test/etcdctl --endpoints=localhost:2379 get foo
macOS (Darwin)
ETCD_VER=v3.6.5
# choose either URL
GOOGLE_URL=https://storage.googleapis.com/etcd
GITHUB_URL=https://github.com/etcd-io/etcd/releases/download
DOWNLOAD_URL=${GOOGLE_URL}
rm -f /tmp/etcd-${ETCD_VER}-darwin-amd64.zip
rm -rf /tmp/etcd-download-test && mkdir -p /tmp/etcd-download-test
curl -L ${DOWNLOAD_URL}/${ETCD_VER}/etcd-${ETCD_VER}-darwin-amd64.zip -o /tmp/etcd-${ETCD_VER}-darwin-amd64.zip
unzip /tmp/etcd-${ETCD_VER}-darwin-amd64.zip -d /tmp && rm -f /tmp/etcd-${ETCD_VER}-darwin-amd64.zip
mv /tmp/etcd-${ETCD_VER}-darwin-amd64/* /tmp/etcd-download-test && rm -rf mv /tmp/etcd-${ETCD_VER}-darwin-amd64
/tmp/etcd-download-test/etcd --version
/tmp/etcd-download-test/etcdctl version
/tmp/etcd-download-test/etcdutl version
Docker
etcd uses gcr.io/etcd-development/etcd as a primary container registry, and quay.io/coreos/etcd as secondary.
ETCD_VER=v3.6.5
rm -rf /tmp/etcd-data.tmp && mkdir -p /tmp/etcd-data.tmp && \
docker rmi gcr.io/etcd-development/etcd:${ETCD_VER} || true && \
docker run \
-p 2379:2379 \
-p 2380:2380 \
--mount type=bind,source=/tmp/etcd-data.tmp,destination=/etcd-data \
--name etcd-gcr-${ETCD_VER} \
gcr.io/etcd-development/etcd:${ETCD_VER} \
/usr/local/bin/etcd \
--name s1 \
--data-dir /etcd-data \
--listen-client-urls http://0.0.0.0:2379 \
--advertise-client-urls http://0.0.0.0:2379 \
--listen-peer-urls http://0.0.0.0:2380 \
--initial-advertise-peer-urls http://0.0.0.0:2380 \
--initial-cluster s1=http://0.0.0.0:2380 \
--initial-cluster-token tkn \
--initial-cluster-state new \
--log-level info \
--logger zap \
--log-outputs stderr
docker exec etcd-gcr-${ETCD_VER} /usr/local/bin/etcd --version
docker exec etcd-gcr-${ETCD_VER} /usr/local/bin/etcdctl version
docker exec etcd-gcr-${ETCD_VER} /usr/local/bin/etcdutl version
docker exec etcd-gcr-${ETCD_VER} /usr/local/bin/etcdctl endpoint health
docker exec etcd-gcr-${ETCD_VER} /usr/local/bin/etcdctl put foo bar
docker exec etcd-gcr-${ETCD_VER} /usr/local/bin/etcdctl get foo |
| 3.6.4 | 25 Julai 2025 | — | 64-bit ZIP Maelezo ya toleoPlease check out CHANGELOG for a full list of changes. And make sure to read upgrade guide before upgrading etcd (there may be breaking changes).
For installation guides, please check out play.etcd.io and operating etcd. Latest support status for common architectures and operating systems can be found at supported platforms.
Linux
ETCD_VER=v3.6.4
# choose either URL
GOOGLE_URL=https://storage.googleapis.com/etcd
GITHUB_URL=https://github.com/etcd-io/etcd/releases/download
DOWNLOAD_URL=${GOOGLE_URL}
rm -f /tmp/etcd-${ETCD_VER}-linux-amd64.tar.gz
rm -rf /tmp/etcd-download-test && mkdir -p /tmp/etcd-download-test
curl -L ${DOWNLOAD_URL}/${ETCD_VER}/etcd-${ETCD_VER}-linux-amd64.tar.gz -o /tmp/etcd-${ETCD_VER}-linux-amd64.tar.gz
tar xzvf /tmp/etcd-${ETCD_VER}-linux-amd64.tar.gz -C /tmp/etcd-download-test --strip-components=1 --no-same-owner
rm -f /tmp/etcd-${ETCD_VER}-linux-amd64.tar.gz
/tmp/etcd-download-test/etcd --version
/tmp/etcd-download-test/etcdctl version
/tmp/etcd-download-test/etcdutl version
# start a local etcd server
/tmp/etcd-download-test/etcd
# write,read to etcd
/tmp/etcd-download-test/etcdctl --endpoints=localhost:2379 put foo bar
/tmp/etcd-download-test/etcdctl --endpoints=localhost:2379 get foo
macOS (Darwin)
ETCD_VER=v3.6.4
# choose either URL
GOOGLE_URL=https://storage.googleapis.com/etcd
GITHUB_URL=https://github.com/etcd-io/etcd/releases/download
DOWNLOAD_URL=${GOOGLE_URL}
rm -f /tmp/etcd-${ETCD_VER}-darwin-amd64.zip
rm -rf /tmp/etcd-download-test && mkdir -p /tmp/etcd-download-test
curl -L ${DOWNLOAD_URL}/${ETCD_VER}/etcd-${ETCD_VER}-darwin-amd64.zip -o /tmp/etcd-${ETCD_VER}-darwin-amd64.zip
unzip /tmp/etcd-${ETCD_VER}-darwin-amd64.zip -d /tmp && rm -f /tmp/etcd-${ETCD_VER}-darwin-amd64.zip
mv /tmp/etcd-${ETCD_VER}-darwin-amd64/* /tmp/etcd-download-test && rm -rf mv /tmp/etcd-${ETCD_VER}-darwin-amd64
/tmp/etcd-download-test/etcd --version
/tmp/etcd-download-test/etcdctl version
/tmp/etcd-download-test/etcdutl version
Docker
etcd uses gcr.io/etcd-development/etcd as a primary container registry, and quay.io/coreos/etcd as secondary.
ETCD_VER=v3.6.4
rm -rf /tmp/etcd-data.tmp && mkdir -p /tmp/etcd-data.tmp && \
docker rmi gcr.io/etcd-development/etcd:${ETCD_VER} || true && \
docker run \
-p 2379:2379 \
-p 2380:2380 \
--mount type=bind,source=/tmp/etcd-data.tmp,destination=/etcd-data \
--name etcd-gcr-${ETCD_VER} \
gcr.io/etcd-development/etcd:${ETCD_VER} \
/usr/local/bin/etcd \
--name s1 \
--data-dir /etcd-data \
--listen-client-urls http://0.0.0.0:2379 \
--advertise-client-urls http://0.0.0.0:2379 \
--listen-peer-urls http://0.0.0.0:2380 \
--initial-advertise-peer-urls http://0.0.0.0:2380 \
--initial-cluster s1=http://0.0.0.0:2380 \
--initial-cluster-token tkn \
--initial-cluster-state new \
--log-level info \
--logger zap \
--log-outputs stderr
docker exec etcd-gcr-${ETCD_VER} /usr/local/bin/etcd --version
docker exec etcd-gcr-${ETCD_VER} /usr/local/bin/etcdctl version
docker exec etcd-gcr-${ETCD_VER} /usr/local/bin/etcdutl version
docker exec etcd-gcr-${ETCD_VER} /usr/local/bin/etcdctl endpoint health
docker exec etcd-gcr-${ETCD_VER} /usr/local/bin/etcdctl put foo bar
docker exec etcd-gcr-${ETCD_VER} /usr/local/bin/etcdctl get foo |
| 3.6.3 | 22 Julai 2025 | — | 64-bit ZIP Maelezo ya toleoPlease check out CHANGELOG for a full list of changes. And make sure to read upgrade guide before upgrading etcd (there may be breaking changes).
For installation guides, please check out play.etcd.io and operating etcd. Latest support status for common architectures and operating systems can be found at supported platforms.
Linux
ETCD_VER=v3.6.3
# choose either URL
GOOGLE_URL=https://storage.googleapis.com/etcd
GITHUB_URL=https://github.com/etcd-io/etcd/releases/download
DOWNLOAD_URL=${GOOGLE_URL}
rm -f /tmp/etcd-${ETCD_VER}-linux-amd64.tar.gz
rm -rf /tmp/etcd-download-test && mkdir -p /tmp/etcd-download-test
curl -L ${DOWNLOAD_URL}/${ETCD_VER}/etcd-${ETCD_VER}-linux-amd64.tar.gz -o /tmp/etcd-${ETCD_VER}-linux-amd64.tar.gz
tar xzvf /tmp/etcd-${ETCD_VER}-linux-amd64.tar.gz -C /tmp/etcd-download-test --strip-components=1 --no-same-owner
rm -f /tmp/etcd-${ETCD_VER}-linux-amd64.tar.gz
/tmp/etcd-download-test/etcd --version
/tmp/etcd-download-test/etcdctl version
/tmp/etcd-download-test/etcdutl version
# start a local etcd server
/tmp/etcd-download-test/etcd
# write,read to etcd
/tmp/etcd-download-test/etcdctl --endpoints=localhost:2379 put foo bar
/tmp/etcd-download-test/etcdctl --endpoints=localhost:2379 get foo
macOS (Darwin)
ETCD_VER=v3.6.3
# choose either URL
GOOGLE_URL=https://storage.googleapis.com/etcd
GITHUB_URL=https://github.com/etcd-io/etcd/releases/download
DOWNLOAD_URL=${GOOGLE_URL}
rm -f /tmp/etcd-${ETCD_VER}-darwin-amd64.zip
rm -rf /tmp/etcd-download-test && mkdir -p /tmp/etcd-download-test
curl -L ${DOWNLOAD_URL}/${ETCD_VER}/etcd-${ETCD_VER}-darwin-amd64.zip -o /tmp/etcd-${ETCD_VER}-darwin-amd64.zip
unzip /tmp/etcd-${ETCD_VER}-darwin-amd64.zip -d /tmp && rm -f /tmp/etcd-${ETCD_VER}-darwin-amd64.zip
mv /tmp/etcd-${ETCD_VER}-darwin-amd64/* /tmp/etcd-download-test && rm -rf mv /tmp/etcd-${ETCD_VER}-darwin-amd64
/tmp/etcd-download-test/etcd --version
/tmp/etcd-download-test/etcdctl version
/tmp/etcd-download-test/etcdutl version
Docker
etcd uses gcr.io/etcd-development/etcd as a primary container registry, and quay.io/coreos/etcd as secondary.
ETCD_VER=v3.6.3
rm -rf /tmp/etcd-data.tmp && mkdir -p /tmp/etcd-data.tmp && \
docker rmi gcr.io/etcd-development/etcd:${ETCD_VER} || true && \
docker run \
-p 2379:2379 \
-p 2380:2380 \
--mount type=bind,source=/tmp/etcd-data.tmp,destination=/etcd-data \
--name etcd-gcr-${ETCD_VER} \
gcr.io/etcd-development/etcd:${ETCD_VER} \
/usr/local/bin/etcd \
--name s1 \
--data-dir /etcd-data \
--listen-client-urls http://0.0.0.0:2379 \
--advertise-client-urls http://0.0.0.0:2379 \
--listen-peer-urls http://0.0.0.0:2380 \
--initial-advertise-peer-urls http://0.0.0.0:2380 \
--initial-cluster s1=http://0.0.0.0:2380 \
--initial-cluster-token tkn \
--initial-cluster-state new \
--log-level info \
--logger zap \
--log-outputs stderr
docker exec etcd-gcr-${ETCD_VER} /usr/local/bin/etcd --version
docker exec etcd-gcr-${ETCD_VER} /usr/local/bin/etcdctl version
docker exec etcd-gcr-${ETCD_VER} /usr/local/bin/etcdutl version
docker exec etcd-gcr-${ETCD_VER} /usr/local/bin/etcdctl endpoint health
docker exec etcd-gcr-${ETCD_VER} /usr/local/bin/etcdctl put foo bar
docker exec etcd-gcr-${ETCD_VER} /usr/local/bin/etcdctl get foo |
| 3.6.2 | 10 Julai 2025 | — | 64-bit ZIP Maelezo ya toleoPlease check out CHANGELOG for a full list of changes. And make sure to read upgrade guide before upgrading etcd (there may be breaking changes).
For installation guides, please check out play.etcd.io and operating etcd. Latest support status for common architectures and operating systems can be found at supported platforms.
Linux
ETCD_VER=v3.6.2
# choose either URL
GOOGLE_URL=https://storage.googleapis.com/etcd
GITHUB_URL=https://github.com/etcd-io/etcd/releases/download
DOWNLOAD_URL=${GOOGLE_URL}
rm -f /tmp/etcd-${ETCD_VER}-linux-amd64.tar.gz
rm -rf /tmp/etcd-download-test && mkdir -p /tmp/etcd-download-test
curl -L ${DOWNLOAD_URL}/${ETCD_VER}/etcd-${ETCD_VER}-linux-amd64.tar.gz -o /tmp/etcd-${ETCD_VER}-linux-amd64.tar.gz
tar xzvf /tmp/etcd-${ETCD_VER}-linux-amd64.tar.gz -C /tmp/etcd-download-test --strip-components=1 --no-same-owner
rm -f /tmp/etcd-${ETCD_VER}-linux-amd64.tar.gz
/tmp/etcd-download-test/etcd --version
/tmp/etcd-download-test/etcdctl version
/tmp/etcd-download-test/etcdutl version
# start a local etcd server
/tmp/etcd-download-test/etcd
# write,read to etcd
/tmp/etcd-download-test/etcdctl --endpoints=localhost:2379 put foo bar
/tmp/etcd-download-test/etcdctl --endpoints=localhost:2379 get foo
macOS (Darwin)
ETCD_VER=v3.6.2
# choose either URL
GOOGLE_URL=https://storage.googleapis.com/etcd
GITHUB_URL=https://github.com/etcd-io/etcd/releases/download
DOWNLOAD_URL=${GOOGLE_URL}
rm -f /tmp/etcd-${ETCD_VER}-darwin-amd64.zip
rm -rf /tmp/etcd-download-test && mkdir -p /tmp/etcd-download-test
curl -L ${DOWNLOAD_URL}/${ETCD_VER}/etcd-${ETCD_VER}-darwin-amd64.zip -o /tmp/etcd-${ETCD_VER}-darwin-amd64.zip
unzip /tmp/etcd-${ETCD_VER}-darwin-amd64.zip -d /tmp && rm -f /tmp/etcd-${ETCD_VER}-darwin-amd64.zip
mv /tmp/etcd-${ETCD_VER}-darwin-amd64/* /tmp/etcd-download-test && rm -rf mv /tmp/etcd-${ETCD_VER}-darwin-amd64
/tmp/etcd-download-test/etcd --version
/tmp/etcd-download-test/etcdctl version
/tmp/etcd-download-test/etcdutl version
Docker
etcd uses gcr.io/etcd-development/etcd as a primary container registry, and quay.io/coreos/etcd as secondary.
ETCD_VER=v3.6.2
rm -rf /tmp/etcd-data.tmp && mkdir -p /tmp/etcd-data.tmp && \
docker rmi gcr.io/etcd-development/etcd:${ETCD_VER} || true && \
docker run \
-p 2379:2379 \
-p 2380:2380 \
--mount type=bind,source=/tmp/etcd-data.tmp,destination=/etcd-data \
--name etcd-gcr-${ETCD_VER} \
gcr.io/etcd-development/etcd:${ETCD_VER} \
/usr/local/bin/etcd \
--name s1 \
--data-dir /etcd-data \
--listen-client-urls http://0.0.0.0:2379 \
--advertise-client-urls http://0.0.0.0:2379 \
--listen-peer-urls http://0.0.0.0:2380 \
--initial-advertise-peer-urls http://0.0.0.0:2380 \
--initial-cluster s1=http://0.0.0.0:2380 \
--initial-cluster-token tkn \
--initial-cluster-state new \
--log-level info \
--logger zap \
--log-outputs stderr
docker exec etcd-gcr-${ETCD_VER} /usr/local/bin/etcd --version
docker exec etcd-gcr-${ETCD_VER} /usr/local/bin/etcdctl version
docker exec etcd-gcr-${ETCD_VER} /usr/local/bin/etcdutl version
docker exec etcd-gcr-${ETCD_VER} /usr/local/bin/etcdctl endpoint health
docker exec etcd-gcr-${ETCD_VER} /usr/local/bin/etcdctl put foo bar
docker exec etcd-gcr-${ETCD_VER} /usr/local/bin/etcdctl get foo |
| 3.6.1 | 6 Juni 2025 | — | 64-bit ZIP Maelezo ya toleoPlease check out CHANGELOG for a full list of changes. And make sure to read upgrade guide before upgrading etcd (there may be breaking changes).
For installation guides, please check out play.etcd.io and operating etcd. Latest support status for common architectures and operating systems can be found at supported platforms.
Linux
ETCD_VER=v3.6.1
# choose either URL
GOOGLE_URL=https://storage.googleapis.com/etcd
GITHUB_URL=https://github.com/etcd-io/etcd/releases/download
DOWNLOAD_URL=${GOOGLE_URL}
rm -f /tmp/etcd-${ETCD_VER}-linux-amd64.tar.gz
rm -rf /tmp/etcd-download-test && mkdir -p /tmp/etcd-download-test
curl -L ${DOWNLOAD_URL}/${ETCD_VER}/etcd-${ETCD_VER}-linux-amd64.tar.gz -o /tmp/etcd-${ETCD_VER}-linux-amd64.tar.gz
tar xzvf /tmp/etcd-${ETCD_VER}-linux-amd64.tar.gz -C /tmp/etcd-download-test --strip-components=1 --no-same-owner
rm -f /tmp/etcd-${ETCD_VER}-linux-amd64.tar.gz
/tmp/etcd-download-test/etcd --version
/tmp/etcd-download-test/etcdctl version
/tmp/etcd-download-test/etcdutl version
# start a local etcd server
/tmp/etcd-download-test/etcd
# write,read to etcd
/tmp/etcd-download-test/etcdctl --endpoints=localhost:2379 put foo bar
/tmp/etcd-download-test/etcdctl --endpoints=localhost:2379 get foo
macOS (Darwin)
ETCD_VER=v3.6.1
# choose either URL
GOOGLE_URL=https://storage.googleapis.com/etcd
GITHUB_URL=https://github.com/etcd-io/etcd/releases/download
DOWNLOAD_URL=${GOOGLE_URL}
rm -f /tmp/etcd-${ETCD_VER}-darwin-amd64.zip
rm -rf /tmp/etcd-download-test && mkdir -p /tmp/etcd-download-test
curl -L ${DOWNLOAD_URL}/${ETCD_VER}/etcd-${ETCD_VER}-darwin-amd64.zip -o /tmp/etcd-${ETCD_VER}-darwin-amd64.zip
unzip /tmp/etcd-${ETCD_VER}-darwin-amd64.zip -d /tmp && rm -f /tmp/etcd-${ETCD_VER}-darwin-amd64.zip
mv /tmp/etcd-${ETCD_VER}-darwin-amd64/* /tmp/etcd-download-test && rm -rf mv /tmp/etcd-${ETCD_VER}-darwin-amd64
/tmp/etcd-download-test/etcd --version
/tmp/etcd-download-test/etcdctl version
/tmp/etcd-download-test/etcdutl version
Docker
etcd uses gcr.io/etcd-development/etcd as a primary container registry, and quay.io/coreos/etcd as secondary.
ETCD_VER=v3.6.1
rm -rf /tmp/etcd-data.tmp && mkdir -p /tmp/etcd-data.tmp && \
docker rmi gcr.io/etcd-development/etcd:${ETCD_VER} || true && \
docker run \
-p 2379:2379 \
-p 2380:2380 \
--mount type=bind,source=/tmp/etcd-data.tmp,destination=/etcd-data \
--name etcd-gcr-${ETCD_VER} \
gcr.io/etcd-development/etcd:${ETCD_VER} \
/usr/local/bin/etcd \
--name s1 \
--data-dir /etcd-data \
--listen-client-urls http://0.0.0.0:2379 \
--advertise-client-urls http://0.0.0.0:2379 \
--listen-peer-urls http://0.0.0.0:2380 \
--initial-advertise-peer-urls http://0.0.0.0:2380 \
--initial-cluster s1=http://0.0.0.0:2380 \
--initial-cluster-token tkn \
--initial-cluster-state new \
--log-level info \
--logger zap \
--log-outputs stderr
docker exec etcd-gcr-${ETCD_VER} /usr/local/bin/etcd --version
docker exec etcd-gcr-${ETCD_VER} /usr/local/bin/etcdctl version
docker exec etcd-gcr-${ETCD_VER} /usr/local/bin/etcdutl version
docker exec etcd-gcr-${ETCD_VER} /usr/local/bin/etcdctl endpoint health
docker exec etcd-gcr-${ETCD_VER} /usr/local/bin/etcdctl put foo bar
docker exec etcd-gcr-${ETCD_VER} /usr/local/bin/etcdctl get foo |
| 3.6.0 | 15 Mei 2025 | — | 64-bit ZIP Maelezo ya toleoPlease check out CHANGELOG for a full list of changes. And make sure to read upgrade guide before upgrading etcd (there may be breaking changes).
For installation guides, please check out play.etcd.io and operating etcd. Latest support status for common architectures and operating systems can be found at supported platforms.
Linux
ETCD_VER=v3.6.0
# choose either URL
GOOGLE_URL=https://storage.googleapis.com/etcd
GITHUB_URL=https://github.com/etcd-io/etcd/releases/download
DOWNLOAD_URL=${GOOGLE_URL}
rm -f /tmp/etcd-${ETCD_VER}-linux-amd64.tar.gz
rm -rf /tmp/etcd-download-test && mkdir -p /tmp/etcd-download-test
curl -L ${DOWNLOAD_URL}/${ETCD_VER}/etcd-${ETCD_VER}-linux-amd64.tar.gz -o /tmp/etcd-${ETCD_VER}-linux-amd64.tar.gz
tar xzvf /tmp/etcd-${ETCD_VER}-linux-amd64.tar.gz -C /tmp/etcd-download-test --strip-components=1 --no-same-owner
rm -f /tmp/etcd-${ETCD_VER}-linux-amd64.tar.gz
/tmp/etcd-download-test/etcd --version
/tmp/etcd-download-test/etcdctl version
/tmp/etcd-download-test/etcdutl version
# start a local etcd server
/tmp/etcd-download-test/etcd
# write,read to etcd
/tmp/etcd-download-test/etcdctl --endpoints=localhost:2379 put foo bar
/tmp/etcd-download-test/etcdctl --endpoints=localhost:2379 get foo
macOS (Darwin)
ETCD_VER=v3.6.0
# choose either URL
GOOGLE_URL=https://storage.googleapis.com/etcd
GITHUB_URL=https://github.com/etcd-io/etcd/releases/download
DOWNLOAD_URL=${GOOGLE_URL}
rm -f /tmp/etcd-${ETCD_VER}-darwin-amd64.zip
rm -rf /tmp/etcd-download-test && mkdir -p /tmp/etcd-download-test
curl -L ${DOWNLOAD_URL}/${ETCD_VER}/etcd-${ETCD_VER}-darwin-amd64.zip -o /tmp/etcd-${ETCD_VER}-darwin-amd64.zip
unzip /tmp/etcd-${ETCD_VER}-darwin-amd64.zip -d /tmp && rm -f /tmp/etcd-${ETCD_VER}-darwin-amd64.zip
mv /tmp/etcd-${ETCD_VER}-darwin-amd64/* /tmp/etcd-download-test && rm -rf mv /tmp/etcd-${ETCD_VER}-darwin-amd64
/tmp/etcd-download-test/etcd --version
/tmp/etcd-download-test/etcdctl version
/tmp/etcd-download-test/etcdutl version
Docker
etcd uses gcr.io/etcd-development/etcd as a primary container registry, and quay.io/coreos/etcd as secondary.
ETCD_VER=v3.6.0
rm -rf /tmp/etcd-data.tmp && mkdir -p /tmp/etcd-data.tmp && \
docker rmi gcr.io/etcd-development/etcd:${ETCD_VER} || true && \
docker run \
-p 2379:2379 \
-p 2380:2380 \
--mount type=bind,source=/tmp/etcd-data.tmp,destination=/etcd-data \
--name etcd-gcr-${ETCD_VER} \
gcr.io/etcd-development/etcd:${ETCD_VER} \
/usr/local/bin/etcd \
--name s1 \
--data-dir /etcd-data \
--listen-client-urls http://0.0.0.0:2379 \
--advertise-client-urls http://0.0.0.0:2379 \
--listen-peer-urls http://0.0.0.0:2380 \
--initial-advertise-peer-urls http://0.0.0.0:2380 \
--initial-cluster s1=http://0.0.0.0:2380 \
--initial-cluster-token tkn \
--initial-cluster-state new \
--log-level info \
--logger zap \
--log-outputs stderr
docker exec etcd-gcr-${ETCD_VER} /usr/local/bin/etcd --version
docker exec etcd-gcr-${ETCD_VER} /usr/local/bin/etcdctl version
docker exec etcd-gcr-${ETCD_VER} /usr/local/bin/etcdutl version
docker exec etcd-gcr-${ETCD_VER} /usr/local/bin/etcdctl endpoint health
docker exec etcd-gcr-${ETCD_VER} /usr/local/bin/etcdctl put foo bar
docker exec etcd-gcr-${ETCD_VER} /usr/local/bin/etcdctl get foo |
| 3.5.21 | 27 Machi 2025 | — | 64-bit ZIP Maelezo ya toleoPlease check out CHANGELOG for a full list of changes. And make sure to read upgrade guide before upgrading etcd (there may be breaking changes).
For installation guides, please check out play.etcd.io and operating etcd. Latest support status for common architectures and operating systems can be found at supported platforms.
Linux
ETCD_VER=v3.5.21
# choose either URL
GOOGLE_URL=https://storage.googleapis.com/etcd
GITHUB_URL=https://github.com/etcd-io/etcd/releases/download
DOWNLOAD_URL=${GOOGLE_URL}
rm -f /tmp/etcd-${ETCD_VER}-linux-amd64.tar.gz
rm -rf /tmp/etcd-download-test && mkdir -p /tmp/etcd-download-test
curl -L ${DOWNLOAD_URL}/${ETCD_VER}/etcd-${ETCD_VER}-linux-amd64.tar.gz -o /tmp/etcd-${ETCD_VER}-linux-amd64.tar.gz
tar xzvf /tmp/etcd-${ETCD_VER}-linux-amd64.tar.gz -C /tmp/etcd-download-test --strip-components=1
rm -f /tmp/etcd-${ETCD_VER}-linux-amd64.tar.gz
/tmp/etcd-download-test/etcd --version
/tmp/etcd-download-test/etcdctl version
/tmp/etcd-download-test/etcdutl version
# start a local etcd server
/tmp/etcd-download-test/etcd
# write,read to etcd
/tmp/etcd-download-test/etcdctl --endpoints=localhost:2379 put foo bar
/tmp/etcd-download-test/etcdctl --endpoints=localhost:2379 get foo
macOS (Darwin)
ETCD_VER=v3.5.21
# choose either URL
GOOGLE_URL=https://storage.googleapis.com/etcd
GITHUB_URL=https://github.com/etcd-io/etcd/releases/download
DOWNLOAD_URL=${GOOGLE_URL}
rm -f /tmp/etcd-${ETCD_VER}-darwin-amd64.zip
rm -rf /tmp/etcd-download-test && mkdir -p /tmp/etcd-download-test
curl -L ${DOWNLOAD_URL}/${ETCD_VER}/etcd-${ETCD_VER}-darwin-amd64.zip -o /tmp/etcd-${ETCD_VER}-darwin-amd64.zip
unzip /tmp/etcd-${ETCD_VER}-darwin-amd64.zip -d /tmp && rm -f /tmp/etcd-${ETCD_VER}-darwin-amd64.zip
mv /tmp/etcd-${ETCD_VER}-darwin-amd64/* /tmp/etcd-download-test && rm -rf mv /tmp/etcd-${ETCD_VER}-darwin-amd64
/tmp/etcd-download-test/etcd --version
/tmp/etcd-download-test/etcdctl version
/tmp/etcd-download-test/etcdutl version
Docker
etcd uses gcr.io/etcd-development/etcd as a primary container registry, and quay.io/coreos/etcd as secondary.
ETCD_VER=v3.5.21
rm -rf /tmp/etcd-data.tmp && mkdir -p /tmp/etcd-data.tmp && \
docker rmi gcr.io/etcd-development/etcd:${ETCD_VER} || true && \
docker run \
-p 2379:2379 \
-p 2380:2380 \
--mount type=bind,source=/tmp/etcd-data.tmp,destination=/etcd-data \
--name etcd-gcr-${ETCD_VER} \
gcr.io/etcd-development/etcd:${ETCD_VER} \
/usr/local/bin/etcd \
--name s1 \
--data-dir /etcd-data \
--listen-client-urls http://0.0.0.0:2379 \
--advertise-client-urls http://0.0.0.0:2379 \
--listen-peer-urls http://0.0.0.0:2380 \
--initial-advertise-peer-urls http://0.0.0.0:2380 \
--initial-cluster s1=http://0.0.0.0:2380 \
--initial-cluster-token tkn \
--initial-cluster-state new \
--log-level info \
--logger zap \
--log-outputs stderr
docker exec etcd-gcr-${ETCD_VER} /usr/local/bin/etcd --version
docker exec etcd-gcr-${ETCD_VER} /usr/local/bin/etcdctl version
docker exec etcd-gcr-${ETCD_VER} /usr/local/bin/etcdutl version
docker exec etcd-gcr-${ETCD_VER} /usr/local/bin/etcdctl endpoint health
docker exec etcd-gcr-${ETCD_VER} /usr/local/bin/etcdctl put foo bar
docker exec etcd-gcr-${ETCD_VER} /usr/local/bin/etcdctl get foo |
| 3.5.18 | 24 Januari 2025 | — | 64-bit ZIP Maelezo ya toleoPlease check out CHANGELOG for a full list of changes. And make sure to read upgrade guide before upgrading etcd (there may be breaking changes).
For installation guides, please check out play.etcd.io and operating etcd. Latest support status for common architectures and operating systems can be found at supported platforms.
Linux
ETCD_VER=v3.5.18
# choose either URL
GOOGLE_URL=https://storage.googleapis.com/etcd
GITHUB_URL=https://github.com/etcd-io/etcd/releases/download
DOWNLOAD_URL=${GOOGLE_URL}
rm -f /tmp/etcd-${ETCD_VER}-linux-amd64.tar.gz
rm -rf /tmp/etcd-download-test && mkdir -p /tmp/etcd-download-test
curl -L ${DOWNLOAD_URL}/${ETCD_VER}/etcd-${ETCD_VER}-linux-amd64.tar.gz -o /tmp/etcd-${ETCD_VER}-linux-amd64.tar.gz
tar xzvf /tmp/etcd-${ETCD_VER}-linux-amd64.tar.gz -C /tmp/etcd-download-test --strip-components=1
rm -f /tmp/etcd-${ETCD_VER}-linux-amd64.tar.gz
/tmp/etcd-download-test/etcd --version
/tmp/etcd-download-test/etcdctl version
/tmp/etcd-download-test/etcdutl version
# start a local etcd server
/tmp/etcd-download-test/etcd
# write,read to etcd
/tmp/etcd-download-test/etcdctl --endpoints=localhost:2379 put foo bar
/tmp/etcd-download-test/etcdctl --endpoints=localhost:2379 get foo
macOS (Darwin)
ETCD_VER=v3.5.18
# choose either URL
GOOGLE_URL=https://storage.googleapis.com/etcd
GITHUB_URL=https://github.com/etcd-io/etcd/releases/download
DOWNLOAD_URL=${GOOGLE_URL}
rm -f /tmp/etcd-${ETCD_VER}-darwin-amd64.zip
rm -rf /tmp/etcd-download-test && mkdir -p /tmp/etcd-download-test
curl -L ${DOWNLOAD_URL}/${ETCD_VER}/etcd-${ETCD_VER}-darwin-amd64.zip -o /tmp/etcd-${ETCD_VER}-darwin-amd64.zip
unzip /tmp/etcd-${ETCD_VER}-darwin-amd64.zip -d /tmp && rm -f /tmp/etcd-${ETCD_VER}-darwin-amd64.zip
mv /tmp/etcd-${ETCD_VER}-darwin-amd64/* /tmp/etcd-download-test && rm -rf mv /tmp/etcd-${ETCD_VER}-darwin-amd64
/tmp/etcd-download-test/etcd --version
/tmp/etcd-download-test/etcdctl version
/tmp/etcd-download-test/etcdutl version
Docker
etcd uses gcr.io/etcd-development/etcd as a primary container registry, and quay.io/coreos/etcd as secondary.
ETCD_VER=v3.5.18
rm -rf /tmp/etcd-data.tmp && mkdir -p /tmp/etcd-data.tmp && \
docker rmi gcr.io/etcd-development/etcd:${ETCD_VER} || true && \
docker run \
-p 2379:2379 \
-p 2380:2380 \
--mount type=bind,source=/tmp/etcd-data.tmp,destination=/etcd-data \
--name etcd-gcr-${ETCD_VER} \
gcr.io/etcd-development/etcd:${ETCD_VER} \
/usr/local/bin/etcd \
--name s1 \
--data-dir /etcd-data \
--listen-client-urls http://0.0.0.0:2379 \
--advertise-client-urls http://0.0.0.0:2379 \
--listen-peer-urls http://0.0.0.0:2380 \
--initial-advertise-peer-urls http://0.0.0.0:2380 \
--initial-cluster s1=http://0.0.0.0:2380 \
--initial-cluster-token tkn \
--initial-cluster-state new \
--log-level info \
--logger zap \
--log-outputs stderr
docker exec etcd-gcr-${ETCD_VER} /usr/local/bin/etcd --version
docker exec etcd-gcr-${ETCD_VER} /usr/local/bin/etcdctl version
docker exec etcd-gcr-${ETCD_VER} /usr/local/bin/etcdutl version
docker exec etcd-gcr-${ETCD_VER} /usr/local/bin/etcdctl endpoint health
docker exec etcd-gcr-${ETCD_VER} /usr/local/bin/etcdctl put foo bar
docker exec etcd-gcr-${ETCD_VER} /usr/local/bin/etcdctl get foo |
| 3.5.9 | 11 Juni 2023 | — | 64-bit ZIP |
| 3.4.31 | 20 Machi 2024 | — | 64-bit ZIP |
