Zoznam obsahuje 22 verzií programu etcd – od 20. marca 2024 po aktuálnu verziu 3.7.3. Každá verzia vedie na inštalátory zo servera výrobcu.
22 verzií za 3 roky · približne 6,5 ročne
| Verzia | Dátum | Veľkosť | Súbory |
|---|---|---|---|
| 3.7.3Najnovšia | 22. októbra 2026 | — | 64-bit ZIP Zoznam zmienPlease check out [CHANGELOG](https://github.com/etcd-io/etcd/blob/main/CHANGELOG/CHANGELOG-3.7.md) for a full list of changes. And make sure to read [upgrade guide](https://etcd.io/docs/v3.7/upgrades/upgrade_3_7/) before upgrading etcd (there may be breaking changes).
For installation guides, please check out [play.etcd.io](http://play.etcd.io) and [operating etcd](https://etcd.io/docs/v3.7/op-guide/). Latest support status for common architectures and operating systems can be found at [supported platforms](https://etcd.io/docs/v3.7/op-guide/supported-platform/).
###### Linux
```sh
ETCD_VER=v3.7.3
# choose either URL
GOOGLE_URL=https://storage.googleapis.com/etcd
GITHUB_URL=https://github.com/etcd-io/etcd/releases/download
DOWNLOAD_URL=${GOOGLE_URL}
rm -f /tmp/etcd-${ETCD_VER}-linux-amd64.tar.gz
rm -rf /tmp/etcd-download-test && mkdir -p /tmp/etcd-download-test
curl -L ${DOWNLOAD_URL}/${ETCD_VER}/etcd-${ETCD_VER}-linux-amd64.tar.gz -o /tmp/etcd-${ETCD_VER}-linux-amd64.tar.gz
tar xzvf /tmp/etcd-${ETCD_VER}-linux-amd64.tar.gz -C /tmp/etcd-download-test --strip-components=1 --no-same-owner
rm -f /tmp/etcd-${ETCD_VER}-linux-amd64.tar.gz
/tmp/etcd-download-test/etcd --version
/tmp/etcd-download-test/etcdctl version
/tmp/etcd-download-test/etcdutl version
# start a local etcd server
/tmp/etcd-download-test/etcd
# write,read to etcd
/tmp/etcd-download-test/etcdctl --endpoints=localhost:2379 put foo bar
/tmp/etcd-download-test/etcdctl --endpoints=localhost:2379 get foo
```
###### macOS (Darwin)
```sh
ETCD_VER=v3.7.3
# choose either URL
GOOGLE_URL=https://storage.googleapis.com/etcd
GITHUB_URL=https://github.com/etcd-io/etcd/releases/download
DOWNLOAD_URL=${GOOGLE_URL}
rm -f /tmp/etcd-${ETCD_VER}-darwin-amd64.zip
rm -rf /tmp/etcd-download-test && mkdir -p /tmp/etcd-download-test
curl -L ${DOWNLOAD_URL}/${ETCD_VER}/etcd-${ETCD_VER}-darwin-amd64.zip -o /tmp/etcd-${ETCD_VER}-darwin-amd64.zip
unzip /tmp/etcd-${ETCD_VER}-darwin-amd64.zip -d /tmp && rm -f /tmp/etcd-${ETCD_VER}-darwin-amd64.zip
mv /tmp/etcd-${ETCD_VER}-darwin-amd64/* /tmp/etcd-download-test && rm -rf mv /tmp/etcd-${ETCD_VER}-darwin-amd64
/tmp/etcd-download-test/etcd --version
/tmp/etcd-download-test/etcdctl version
/tmp/etcd-download-test/etcdutl version
```
###### Docker
etcd uses [`gcr.io/etcd-development/etcd`](https://gcr.io/etcd-development/etcd) as a primary container registry, and [`quay.io/coreos/etcd`](https://quay.io/coreos/etcd) as secondary.
```sh
ETCD_VER=v3.7.3
rm -rf /tmp/etcd-data.tmp && mkdir -p /tmp/etcd-data.tmp && \
docker rmi gcr.io/etcd-development/etcd:${ETCD_VER} || true && \
docker run \
-p 2379:2379 \
-p 2380:2380 \
--mount type=bind,source=/tmp/etcd-data.tmp,destination=/etcd-data \
--name etcd-gcr-${ETCD_VER} \
gcr.io/etcd-development/etcd:${ETCD_VER} \
/usr/local/bin/etcd \
--name s1 \
--data-dir /etcd-data \
--listen-client-urls http://0.0.0.0:2379 \
--advertise-client-urls http://0.0.0.0:2379 \
--listen-peer-urls http://0.0.0.0:2380 \
--initial-advertise-peer-urls http://0.0.0.0:2380 \
--initial-cluster s1=http://0.0.0.0:2380 \
--initial-cluster-token tkn \
--initial-cluster-state new \
--log-level info \
--logger zap \
--log-outputs stderr
docker exec etcd-gcr-${ETCD_VER} /usr/local/bin/etcd --version
docker exec etcd-gcr-${ETCD_VER} /usr/local/bin/etcdctl version
docker exec etcd-gcr-${ETCD_VER} /usr/local/bin/etcdutl version
docker exec etcd-gcr-${ETCD_VER} /usr/local/bin/etcdctl endpoint health
docker exec etcd-gcr-${ETCD_VER} /usr/local/bin/etcdctl put foo bar
docker exec etcd-gcr-${ETCD_VER} /usr/local/bin/etcdctl get foo
``` |
| 3.7.2 | 22. septembra 2026 | — | 64-bit ZIP Zoznam zmienPlease check out [CHANGELOG](https://github.com/etcd-io/etcd/blob/main/CHANGELOG/CHANGELOG-3.7.md) for a full list of changes. And make sure to read [upgrade guide](https://etcd.io/docs/v3.7/upgrades/upgrade_3_7/) before upgrading etcd (there may be breaking changes).
For installation guides, please check out [play.etcd.io](http://play.etcd.io) and [operating etcd](https://etcd.io/docs/v3.7/op-guide/). Latest support status for common architectures and operating systems can be found at [supported platforms](https://etcd.io/docs/v3.7/op-guide/supported-platform/).
###### Linux
```sh
ETCD_VER=v3.7.2
# choose either URL
GOOGLE_URL=https://storage.googleapis.com/etcd
GITHUB_URL=https://github.com/etcd-io/etcd/releases/download
DOWNLOAD_URL=${GOOGLE_URL}
rm -f /tmp/etcd-${ETCD_VER}-linux-amd64.tar.gz
rm -rf /tmp/etcd-download-test && mkdir -p /tmp/etcd-download-test
curl -L ${DOWNLOAD_URL}/${ETCD_VER}/etcd-${ETCD_VER}-linux-amd64.tar.gz -o /tmp/etcd-${ETCD_VER}-linux-amd64.tar.gz
tar xzvf /tmp/etcd-${ETCD_VER}-linux-amd64.tar.gz -C /tmp/etcd-download-test --strip-components=1 --no-same-owner
rm -f /tmp/etcd-${ETCD_VER}-linux-amd64.tar.gz
/tmp/etcd-download-test/etcd --version
/tmp/etcd-download-test/etcdctl version
/tmp/etcd-download-test/etcdutl version
# start a local etcd server
/tmp/etcd-download-test/etcd
# write,read to etcd
/tmp/etcd-download-test/etcdctl --endpoints=localhost:2379 put foo bar
/tmp/etcd-download-test/etcdctl --endpoints=localhost:2379 get foo
```
###### macOS (Darwin)
```sh
ETCD_VER=v3.7.2
# choose either URL
GOOGLE_URL=https://storage.googleapis.com/etcd
GITHUB_URL=https://github.com/etcd-io/etcd/releases/download
DOWNLOAD_URL=${GOOGLE_URL}
rm -f /tmp/etcd-${ETCD_VER}-darwin-amd64.zip
rm -rf /tmp/etcd-download-test && mkdir -p /tmp/etcd-download-test
curl -L ${DOWNLOAD_URL}/${ETCD_VER}/etcd-${ETCD_VER}-darwin-amd64.zip -o /tmp/etcd-${ETCD_VER}-darwin-amd64.zip
unzip /tmp/etcd-${ETCD_VER}-darwin-amd64.zip -d /tmp && rm -f /tmp/etcd-${ETCD_VER}-darwin-amd64.zip
mv /tmp/etcd-${ETCD_VER}-darwin-amd64/* /tmp/etcd-download-test && rm -rf mv /tmp/etcd-${ETCD_VER}-darwin-amd64
/tmp/etcd-download-test/etcd --version
/tmp/etcd-download-test/etcdctl version
/tmp/etcd-download-test/etcdutl version
```
###### Docker
etcd uses [`gcr.io/etcd-development/etcd`](https://gcr.io/etcd-development/etcd) as a primary container registry, and [`quay.io/coreos/etcd`](https://quay.io/coreos/etcd) as secondary.
```sh
ETCD_VER=v3.7.2
rm -rf /tmp/etcd-data.tmp && mkdir -p /tmp/etcd-data.tmp && \
docker rmi gcr.io/etcd-development/etcd:${ETCD_VER} || true && \
docker run \
-p 2379:2379 \
-p 2380:2380 \
--mount type=bind,source=/tmp/etcd-data.tmp,destination=/etcd-data \
--name etcd-gcr-${ETCD_VER} \
gcr.io/etcd-development/etcd:${ETCD_VER} \
/usr/local/bin/etcd \
--name s1 \
--data-dir /etcd-data \
--listen-client-urls http://0.0.0.0:2379 \
--advertise-client-urls http://0.0.0.0:2379 \
--listen-peer-urls http://0.0.0.0:2380 \
--initial-advertise-peer-urls http://0.0.0.0:2380 \
--initial-cluster s1=http://0.0.0.0:2380 \
--initial-cluster-token tkn \
--initial-cluster-state new \
--log-level info \
--logger zap \
--log-outputs stderr
docker exec etcd-gcr-${ETCD_VER} /usr/local/bin/etcd --version
docker exec etcd-gcr-${ETCD_VER} /usr/local/bin/etcdctl version
docker exec etcd-gcr-${ETCD_VER} /usr/local/bin/etcdutl version
docker exec etcd-gcr-${ETCD_VER} /usr/local/bin/etcdctl endpoint health
docker exec etcd-gcr-${ETCD_VER} /usr/local/bin/etcdctl put foo bar
docker exec etcd-gcr-${ETCD_VER} /usr/local/bin/etcdctl get foo
``` |
| 3.7.1 | 23. júla 2026 | — | 64-bit ZIP Zoznam zmienPlease check out [CHANGELOG](https://github.com/etcd-io/etcd/blob/main/CHANGELOG/CHANGELOG-3.7.md) for a full list of changes. And make sure to read [upgrade guide](https://etcd.io/docs/v3.7/upgrades/upgrade_3_7/) before upgrading etcd (there may be breaking changes).
For installation guides, please check out [operating etcd](https://etcd.io/docs/v3.7/op-guide/). Latest support status for common architectures and operating systems can be found at [supported platforms](https://etcd.io/docs/v3.7/op-guide/supported-platform/).
###### Linux
```sh
ETCD_VER=v3.7.1
# choose either URL
GOOGLE_URL=https://storage.googleapis.com/etcd
GITHUB_URL=https://github.com/etcd-io/etcd/releases/download
DOWNLOAD_URL=${GOOGLE_URL}
rm -f /tmp/etcd-${ETCD_VER}-linux-amd64.tar.gz
rm -rf /tmp/etcd-download-test && mkdir -p /tmp/etcd-download-test
curl -L ${DOWNLOAD_URL}/${ETCD_VER}/etcd-${ETCD_VER}-linux-amd64.tar.gz -o /tmp/etcd-${ETCD_VER}-linux-amd64.tar.gz
tar xzvf /tmp/etcd-${ETCD_VER}-linux-amd64.tar.gz -C /tmp/etcd-download-test --strip-components=1 --no-same-owner
rm -f /tmp/etcd-${ETCD_VER}-linux-amd64.tar.gz
/tmp/etcd-download-test/etcd --version
/tmp/etcd-download-test/etcdctl version
/tmp/etcd-download-test/etcdutl version
# start a local etcd server
/tmp/etcd-download-test/etcd
# write,read to etcd
/tmp/etcd-download-test/etcdctl --endpoints=localhost:2379 put foo bar
/tmp/etcd-download-test/etcdctl --endpoints=localhost:2379 get foo
```
###### macOS (Darwin)
```sh
ETCD_VER=v3.7.1
# choose either URL
GOOGLE_URL=https://storage.googleapis.com/etcd
GITHUB_URL=https://github.com/etcd-io/etcd/releases/download
DOWNLOAD_URL=${GOOGLE_URL}
rm -f /tmp/etcd-${ETCD_VER}-darwin-amd64.zip
rm -rf /tmp/etcd-download-test && mkdir -p /tmp/etcd-download-test
curl -L ${DOWNLOAD_URL}/${ETCD_VER}/etcd-${ETCD_VER}-darwin-amd64.zip -o /tmp/etcd-${ETCD_VER}-darwin-amd64.zip
unzip /tmp/etcd-${ETCD_VER}-darwin-amd64.zip -d /tmp && rm -f /tmp/etcd-${ETCD_VER}-darwin-amd64.zip
mv /tmp/etcd-${ETCD_VER}-darwin-amd64/* /tmp/etcd-download-test && rm -rf mv /tmp/etcd-${ETCD_VER}-darwin-amd64
/tmp/etcd-download-test/etcd --version
/tmp/etcd-download-test/etcdctl version
/tmp/etcd-download-test/etcdutl version
```
###### Docker
etcd uses [`gcr.io/etcd-development/etcd`](https://gcr.io/etcd-development/etcd) as a primary container registry, and [`quay.io/coreos/etcd`](https://quay.io/coreos/etcd) as secondary.
```sh
ETCD_VER=v3.7.1
rm -rf /tmp/etcd-data.tmp && mkdir -p /tmp/etcd-data.tmp && \
docker rmi gcr.io/etcd-development/etcd:${ETCD_VER} || true && \
docker run \
-p 2379:2379 \
-p 2380:2380 \
--mount type=bind,source=/tmp/etcd-data.tmp,destination=/etcd-data \
--name etcd-gcr-${ETCD_VER} \
gcr.io/etcd-development/etcd:${ETCD_VER} \
/usr/local/bin/etcd \
--name s1 \
--data-dir /etcd-data \
--listen-client-urls http://0.0.0.0:2379 \
--advertise-client-urls http://0.0.0.0:2379 \
--listen-peer-urls http://0.0.0.0:2380 \
--initial-advertise-peer-urls http://0.0.0.0:2380 \
--initial-cluster s1=http://0.0.0.0:2380 \
--initial-cluster-token tkn \
--initial-cluster-state new \
--log-level info \
--logger zap \
--log-outputs stderr
docker exec etcd-gcr-${ETCD_VER} /usr/local/bin/etcd --version
docker exec etcd-gcr-${ETCD_VER} /usr/local/bin/etcdctl version
docker exec etcd-gcr-${ETCD_VER} /usr/local/bin/etcdutl version
docker exec etcd-gcr-${ETCD_VER} /usr/local/bin/etcdctl endpoint health
docker exec etcd-gcr-${ETCD_VER} /usr/local/bin/etcdctl put foo bar
docker exec etcd-gcr-${ETCD_VER} /usr/local/bin/etcdctl get foo
``` |
| 3.7.0 | 8. júla 2026 | — | 64-bit ZIP Zoznam zmienPlease check out [CHANGELOG](https://github.com/etcd-io/etcd/blob/main/CHANGELOG/CHANGELOG-3.7.md) for a full list of changes. And make sure to read [upgrade guide](https://etcd.io/docs/v3.7/upgrades/upgrade_3_7/) before upgrading etcd (there may be breaking changes).
For installation guides, please check out [operating etcd](https://etcd.io/docs/v3.7/op-guide/). Latest support status for common architectures and operating systems can be found at [supported platforms](https://etcd.io/docs/v3.7/op-guide/supported-platform/).
###### Linux
```sh
ETCD_VER=v3.7.0
# choose either URL
GOOGLE_URL=https://storage.googleapis.com/etcd
GITHUB_URL=https://github.com/etcd-io/etcd/releases/download
DOWNLOAD_URL=${GOOGLE_URL}
rm -f /tmp/etcd-${ETCD_VER}-linux-amd64.tar.gz
rm -rf /tmp/etcd-download-test && mkdir -p /tmp/etcd-download-test
curl -L ${DOWNLOAD_URL}/${ETCD_VER}/etcd-${ETCD_VER}-linux-amd64.tar.gz -o /tmp/etcd-${ETCD_VER}-linux-amd64.tar.gz
tar xzvf /tmp/etcd-${ETCD_VER}-linux-amd64.tar.gz -C /tmp/etcd-download-test --strip-components=1 --no-same-owner
rm -f /tmp/etcd-${ETCD_VER}-linux-amd64.tar.gz
/tmp/etcd-download-test/etcd --version
/tmp/etcd-download-test/etcdctl version
/tmp/etcd-download-test/etcdutl version
# start a local etcd server
/tmp/etcd-download-test/etcd
# write,read to etcd
/tmp/etcd-download-test/etcdctl --endpoints=localhost:2379 put foo bar
/tmp/etcd-download-test/etcdctl --endpoints=localhost:2379 get foo
```
###### macOS (Darwin)
```sh
ETCD_VER=v3.7.0
# choose either URL
GOOGLE_URL=https://storage.googleapis.com/etcd
GITHUB_URL=https://github.com/etcd-io/etcd/releases/download
DOWNLOAD_URL=${GOOGLE_URL}
rm -f /tmp/etcd-${ETCD_VER}-darwin-amd64.zip
rm -rf /tmp/etcd-download-test && mkdir -p /tmp/etcd-download-test
curl -L ${DOWNLOAD_URL}/${ETCD_VER}/etcd-${ETCD_VER}-darwin-amd64.zip -o /tmp/etcd-${ETCD_VER}-darwin-amd64.zip
unzip /tmp/etcd-${ETCD_VER}-darwin-amd64.zip -d /tmp && rm -f /tmp/etcd-${ETCD_VER}-darwin-amd64.zip
mv /tmp/etcd-${ETCD_VER}-darwin-amd64/* /tmp/etcd-download-test && rm -rf mv /tmp/etcd-${ETCD_VER}-darwin-amd64
/tmp/etcd-download-test/etcd --version
/tmp/etcd-download-test/etcdctl version
/tmp/etcd-download-test/etcdutl version
```
###### Docker
etcd uses [`gcr.io/etcd-development/etcd`](https://gcr.io/etcd-development/etcd) as a primary container registry, and [`quay.io/coreos/etcd`](https://quay.io/coreos/etcd) as secondary.
```sh
ETCD_VER=v3.7.0
rm -rf /tmp/etcd-data.tmp && mkdir -p /tmp/etcd-data.tmp && \
docker rmi gcr.io/etcd-development/etcd:${ETCD_VER} || true && \
docker run \
-p 2379:2379 \
-p 2380:2380 \
--mount type=bind,source=/tmp/etcd-data.tmp,destination=/etcd-data \
--name etcd-gcr-${ETCD_VER} \
gcr.io/etcd-development/etcd:${ETCD_VER} \
/usr/local/bin/etcd \
--name s1 \
--data-dir /etcd-data \
--listen-client-urls http://0.0.0.0:2379 \
--advertise-client-urls http://0.0.0.0:2379 \
--listen-peer-urls http://0.0.0.0:2380 \
--initial-advertise-peer-urls http://0.0.0.0:2380 \
--initial-cluster s1=http://0.0.0.0:2380 \
--initial-cluster-token tkn \
--initial-cluster-state new \
--log-level info \
--logger zap \
--log-outputs stderr
docker exec etcd-gcr-${ETCD_VER} /usr/local/bin/etcd --version
docker exec etcd-gcr-${ETCD_VER} /usr/local/bin/etcdctl version
docker exec etcd-gcr-${ETCD_VER} /usr/local/bin/etcdutl version
docker exec etcd-gcr-${ETCD_VER} /usr/local/bin/etcdctl endpoint health
docker exec etcd-gcr-${ETCD_VER} /usr/local/bin/etcdctl put foo bar
docker exec etcd-gcr-${ETCD_VER} /usr/local/bin/etcdctl get foo
``` |
| 3.6.13 | 1. júla 2026 | — | 64-bit ZIP Zoznam zmienPlease check out [CHANGELOG](https://github.com/etcd-io/etcd/blob/main/CHANGELOG/CHANGELOG-3.6.md) for a full list of changes. And make sure to read [upgrade guide](https://etcd.io/docs/v3.6/upgrades/upgrade_3_6/) before upgrading etcd (there may be breaking changes).
For installation guides, please check out [play.etcd.io](http://play.etcd.io) and [operating etcd](https://etcd.io/docs/v3.6/op-guide/). Latest support status for common architectures and operating systems can be found at [supported platforms](https://etcd.io/docs/v3.6/op-guide/supported-platform/).
###### Linux
```sh
ETCD_VER=v3.6.13
# choose either URL
GOOGLE_URL=https://storage.googleapis.com/etcd
GITHUB_URL=https://github.com/etcd-io/etcd/releases/download
DOWNLOAD_URL=${GOOGLE_URL}
rm -f /tmp/etcd-${ETCD_VER}-linux-amd64.tar.gz
rm -rf /tmp/etcd-download-test && mkdir -p /tmp/etcd-download-test
curl -L ${DOWNLOAD_URL}/${ETCD_VER}/etcd-${ETCD_VER}-linux-amd64.tar.gz -o /tmp/etcd-${ETCD_VER}-linux-amd64.tar.gz
tar xzvf /tmp/etcd-${ETCD_VER}-linux-amd64.tar.gz -C /tmp/etcd-download-test --strip-components=1 --no-same-owner
rm -f /tmp/etcd-${ETCD_VER}-linux-amd64.tar.gz
/tmp/etcd-download-test/etcd --version
/tmp/etcd-download-test/etcdctl version
/tmp/etcd-download-test/etcdutl version
# start a local etcd server
/tmp/etcd-download-test/etcd
# write,read to etcd
/tmp/etcd-download-test/etcdctl --endpoints=localhost:2379 put foo bar
/tmp/etcd-download-test/etcdctl --endpoints=localhost:2379 get foo
```
###### macOS (Darwin)
```sh
ETCD_VER=v3.6.13
# choose either URL
GOOGLE_URL=https://storage.googleapis.com/etcd
GITHUB_URL=https://github.com/etcd-io/etcd/releases/download
DOWNLOAD_URL=${GOOGLE_URL}
rm -f /tmp/etcd-${ETCD_VER}-darwin-amd64.zip
rm -rf /tmp/etcd-download-test && mkdir -p /tmp/etcd-download-test
curl -L ${DOWNLOAD_URL}/${ETCD_VER}/etcd-${ETCD_VER}-darwin-amd64.zip -o /tmp/etcd-${ETCD_VER}-darwin-amd64.zip
unzip /tmp/etcd-${ETCD_VER}-darwin-amd64.zip -d /tmp && rm -f /tmp/etcd-${ETCD_VER}-darwin-amd64.zip
mv /tmp/etcd-${ETCD_VER}-darwin-amd64/* /tmp/etcd-download-test && rm -rf mv /tmp/etcd-${ETCD_VER}-darwin-amd64
/tmp/etcd-download-test/etcd --version
/tmp/etcd-download-test/etcdctl version
/tmp/etcd-download-test/etcdutl version
```
###### Docker
etcd uses [`gcr.io/etcd-development/etcd`](https://gcr.io/etcd-development/etcd) as a primary container registry, and [`quay.io/coreos/etcd`](https://quay.io/coreos/etcd) as secondary.
```sh
ETCD_VER=v3.6.13
rm -rf /tmp/etcd-data.tmp && mkdir -p /tmp/etcd-data.tmp && \
docker rmi gcr.io/etcd-development/etcd:${ETCD_VER} || true && \
docker run \
-p 2379:2379 \
-p 2380:2380 \
--mount type=bind,source=/tmp/etcd-data.tmp,destination=/etcd-data \
--name etcd-gcr-${ETCD_VER} \
gcr.io/etcd-development/etcd:${ETCD_VER} \
/usr/local/bin/etcd \
--name s1 \
--data-dir /etcd-data \
--listen-client-urls http://0.0.0.0:2379 \
--advertise-client-urls http://0.0.0.0:2379 \
--listen-peer-urls http://0.0.0.0:2380 \
--initial-advertise-peer-urls http://0.0.0.0:2380 \
--initial-cluster s1=http://0.0.0.0:2380 \
--initial-cluster-token tkn \
--initial-cluster-state new \
--log-level info \
--logger zap \
--log-outputs stderr
docker exec etcd-gcr-${ETCD_VER} /usr/local/bin/etcd --version
docker exec etcd-gcr-${ETCD_VER} /usr/local/bin/etcdctl version
docker exec etcd-gcr-${ETCD_VER} /usr/local/bin/etcdutl version
docker exec etcd-gcr-${ETCD_VER} /usr/local/bin/etcdctl endpoint health
docker exec etcd-gcr-${ETCD_VER} /usr/local/bin/etcdctl put foo bar
docker exec etcd-gcr-${ETCD_VER} /usr/local/bin/etcdctl get foo
``` |
| 3.6.12 | 1. júna 2026 | — | 64-bit ZIP Zoznam zmienPlease check out [CHANGELOG](https://github.com/etcd-io/etcd/blob/main/CHANGELOG/CHANGELOG-3.6.md) for a full list of changes. And make sure to read [upgrade guide](https://etcd.io/docs/v3.6/upgrades/upgrade_3_6/) before upgrading etcd (there may be breaking changes).
For installation guides, please check out [operating etcd](https://etcd.io/docs/v3.6/op-guide/). Latest support status for common architectures and operating systems can be found at [supported platforms](https://etcd.io/docs/v3.6/op-guide/supported-platform/).
###### Linux
```sh
ETCD_VER=v3.6.12
# choose either URL
GOOGLE_URL=https://storage.googleapis.com/etcd
GITHUB_URL=https://github.com/etcd-io/etcd/releases/download
DOWNLOAD_URL=${GOOGLE_URL}
rm -f /tmp/etcd-${ETCD_VER}-linux-amd64.tar.gz
rm -rf /tmp/etcd-download-test && mkdir -p /tmp/etcd-download-test
curl -L ${DOWNLOAD_URL}/${ETCD_VER}/etcd-${ETCD_VER}-linux-amd64.tar.gz -o /tmp/etcd-${ETCD_VER}-linux-amd64.tar.gz
tar xzvf /tmp/etcd-${ETCD_VER}-linux-amd64.tar.gz -C /tmp/etcd-download-test --strip-components=1 --no-same-owner
rm -f /tmp/etcd-${ETCD_VER}-linux-amd64.tar.gz
/tmp/etcd-download-test/etcd --version
/tmp/etcd-download-test/etcdctl version
/tmp/etcd-download-test/etcdutl version
# start a local etcd server
/tmp/etcd-download-test/etcd
# write,read to etcd
/tmp/etcd-download-test/etcdctl --endpoints=localhost:2379 put foo bar
/tmp/etcd-download-test/etcdctl --endpoints=localhost:2379 get foo
```
###### macOS (Darwin)
```sh
ETCD_VER=v3.6.12
# choose either URL
GOOGLE_URL=https://storage.googleapis.com/etcd
GITHUB_URL=https://github.com/etcd-io/etcd/releases/download
DOWNLOAD_URL=${GOOGLE_URL}
rm -f /tmp/etcd-${ETCD_VER}-darwin-amd64.zip
rm -rf /tmp/etcd-download-test && mkdir -p /tmp/etcd-download-test
curl -L ${DOWNLOAD_URL}/${ETCD_VER}/etcd-${ETCD_VER}-darwin-amd64.zip -o /tmp/etcd-${ETCD_VER}-darwin-amd64.zip
unzip /tmp/etcd-${ETCD_VER}-darwin-amd64.zip -d /tmp && rm -f /tmp/etcd-${ETCD_VER}-darwin-amd64.zip
mv /tmp/etcd-${ETCD_VER}-darwin-amd64/* /tmp/etcd-download-test && rm -rf mv /tmp/etcd-${ETCD_VER}-darwin-amd64
/tmp/etcd-download-test/etcd --version
/tmp/etcd-download-test/etcdctl version
/tmp/etcd-download-test/etcdutl version
```
###### Docker
etcd uses [`gcr.io/etcd-development/etcd`](https://gcr.io/etcd-development/etcd) as a primary container registry, and [`quay.io/coreos/etcd`](https://quay.io/coreos/etcd) as secondary.
```sh
ETCD_VER=v3.6.12
rm -rf /tmp/etcd-data.tmp && mkdir -p /tmp/etcd-data.tmp && \
docker rmi gcr.io/etcd-development/etcd:${ETCD_VER} || true && \
docker run \
-p 2379:2379 \
-p 2380:2380 \
--mount type=bind,source=/tmp/etcd-data.tmp,destination=/etcd-data \
--name etcd-gcr-${ETCD_VER} \
gcr.io/etcd-development/etcd:${ETCD_VER} \
/usr/local/bin/etcd \
--name s1 \
--data-dir /etcd-data \
--listen-client-urls http://0.0.0.0:2379 \
--advertise-client-urls http://0.0.0.0:2379 \
--listen-peer-urls http://0.0.0.0:2380 \
--initial-advertise-peer-urls http://0.0.0.0:2380 \
--initial-cluster s1=http://0.0.0.0:2380 \
--initial-cluster-token tkn \
--initial-cluster-state new \
--log-level info \
--logger zap \
--log-outputs stderr
docker exec etcd-gcr-${ETCD_VER} /usr/local/bin/etcd --version
docker exec etcd-gcr-${ETCD_VER} /usr/local/bin/etcdctl version
docker exec etcd-gcr-${ETCD_VER} /usr/local/bin/etcdutl version
docker exec etcd-gcr-${ETCD_VER} /usr/local/bin/etcdctl endpoint health
docker exec etcd-gcr-${ETCD_VER} /usr/local/bin/etcdctl put foo bar
docker exec etcd-gcr-${ETCD_VER} /usr/local/bin/etcdctl get foo
``` |
| 3.6.11 | 1. mája 2026 | — | 64-bit ZIP Zoznam zmienPlease check out [CHANGELOG](https://github.com/etcd-io/etcd/blob/main/CHANGELOG/CHANGELOG-3.6.md) for a full list of changes. And make sure to read [upgrade guide](https://etcd.io/docs/v3.6/upgrades/upgrade_3_6/) before upgrading etcd (there may be breaking changes).
For installation guides, please check out [play.etcd.io](http://play.etcd.io) and [operating etcd](https://etcd.io/docs/v3.6/op-guide/). Latest support status for common architectures and operating systems can be found at [supported platforms](https://etcd.io/docs/v3.6/op-guide/supported-platform/).
###### Linux
```sh
ETCD_VER=v3.6.11
# choose either URL
GOOGLE_URL=https://storage.googleapis.com/etcd
GITHUB_URL=https://github.com/etcd-io/etcd/releases/download
DOWNLOAD_URL=${GOOGLE_URL}
rm -f /tmp/etcd-${ETCD_VER}-linux-amd64.tar.gz
rm -rf /tmp/etcd-download-test && mkdir -p /tmp/etcd-download-test
curl -L ${DOWNLOAD_URL}/${ETCD_VER}/etcd-${ETCD_VER}-linux-amd64.tar.gz -o /tmp/etcd-${ETCD_VER}-linux-amd64.tar.gz
tar xzvf /tmp/etcd-${ETCD_VER}-linux-amd64.tar.gz -C /tmp/etcd-download-test --strip-components=1 --no-same-owner
rm -f /tmp/etcd-${ETCD_VER}-linux-amd64.tar.gz
/tmp/etcd-download-test/etcd --version
/tmp/etcd-download-test/etcdctl version
/tmp/etcd-download-test/etcdutl version
# start a local etcd server
/tmp/etcd-download-test/etcd
# write,read to etcd
/tmp/etcd-download-test/etcdctl --endpoints=localhost:2379 put foo bar
/tmp/etcd-download-test/etcdctl --endpoints=localhost:2379 get foo
```
###### macOS (Darwin)
```sh
ETCD_VER=v3.6.11
# choose either URL
GOOGLE_URL=https://storage.googleapis.com/etcd
GITHUB_URL=https://github.com/etcd-io/etcd/releases/download
DOWNLOAD_URL=${GOOGLE_URL}
rm -f /tmp/etcd-${ETCD_VER}-darwin-amd64.zip
rm -rf /tmp/etcd-download-test && mkdir -p /tmp/etcd-download-test
curl -L ${DOWNLOAD_URL}/${ETCD_VER}/etcd-${ETCD_VER}-darwin-amd64.zip -o /tmp/etcd-${ETCD_VER}-darwin-amd64.zip
unzip /tmp/etcd-${ETCD_VER}-darwin-amd64.zip -d /tmp && rm -f /tmp/etcd-${ETCD_VER}-darwin-amd64.zip
mv /tmp/etcd-${ETCD_VER}-darwin-amd64/* /tmp/etcd-download-test && rm -rf mv /tmp/etcd-${ETCD_VER}-darwin-amd64
/tmp/etcd-download-test/etcd --version
/tmp/etcd-download-test/etcdctl version
/tmp/etcd-download-test/etcdutl version
```
###### Docker
etcd uses [`gcr.io/etcd-development/etcd`](https://gcr.io/etcd-development/etcd) as a primary container registry, and [`quay.io/coreos/etcd`](https://quay.io/coreos/etcd) as secondary.
```sh
ETCD_VER=v3.6.11
rm -rf /tmp/etcd-data.tmp && mkdir -p /tmp/etcd-data.tmp && \
docker rmi gcr.io/etcd-development/etcd:${ETCD_VER} || true && \
docker run \
-p 2379:2379 \
-p 2380:2380 \
--mount type=bind,source=/tmp/etcd-data.tmp,destination=/etcd-data \
--name etcd-gcr-${ETCD_VER} \
gcr.io/etcd-development/etcd:${ETCD_VER} \
/usr/local/bin/etcd \
--name s1 \
--data-dir /etcd-data \
--listen-client-urls http://0.0.0.0:2379 \
--advertise-client-urls http://0.0.0.0:2379 \
--listen-peer-urls http://0.0.0.0:2380 \
--initial-advertise-peer-urls http://0.0.0.0:2380 \
--initial-cluster s1=http://0.0.0.0:2380 \
--initial-cluster-token tkn \
--initial-cluster-state new \
--log-level info \
--logger zap \
--log-outputs stderr
docker exec etcd-gcr-${ETCD_VER} /usr/local/bin/etcd --version
docker exec etcd-gcr-${ETCD_VER} /usr/local/bin/etcdctl version
docker exec etcd-gcr-${ETCD_VER} /usr/local/bin/etcdutl version
docker exec etcd-gcr-${ETCD_VER} /usr/local/bin/etcdctl endpoint health
docker exec etcd-gcr-${ETCD_VER} /usr/local/bin/etcdctl put foo bar
docker exec etcd-gcr-${ETCD_VER} /usr/local/bin/etcdctl get foo
``` |
| 3.6.10 | 1. apríla 2026 | — | 64-bit ZIP Zoznam zmienPlease check out CHANGELOG for a full list of changes. And make sure to read upgrade guide before upgrading etcd (there may be breaking changes).
For installation guides, please check out play.etcd.io and operating etcd. Latest support status for common architectures and operating systems can be found at supported platforms.
Linux
ETCD_VER=v3.6.10
# choose either URL
GOOGLE_URL=https://storage.googleapis.com/etcd
GITHUB_URL=https://github.com/etcd-io/etcd/releases/download
DOWNLOAD_URL=${GOOGLE_URL}
rm -f /tmp/etcd-${ETCD_VER}-linux-amd64.tar.gz
rm -rf /tmp/etcd-download-test && mkdir -p /tmp/etcd-download-test
curl -L ${DOWNLOAD_URL}/${ETCD_VER}/etcd-${ETCD_VER}-linux-amd64.tar.gz -o /tmp/etcd-${ETCD_VER}-linux-amd64.tar.gz
tar xzvf /tmp/etcd-${ETCD_VER}-linux-amd64.tar.gz -C /tmp/etcd-download-test --strip-components=1 --no-same-owner
rm -f /tmp/etcd-${ETCD_VER}-linux-amd64.tar.gz
/tmp/etcd-download-test/etcd --version
/tmp/etcd-download-test/etcdctl version
/tmp/etcd-download-test/etcdutl version
# start a local etcd server
/tmp/etcd-download-test/etcd
# write,read to etcd
/tmp/etcd-download-test/etcdctl --endpoints=localhost:2379 put foo bar
/tmp/etcd-download-test/etcdctl --endpoints=localhost:2379 get foo
macOS (Darwin)
ETCD_VER=v3.6.10
# choose either URL
GOOGLE_URL=https://storage.googleapis.com/etcd
GITHUB_URL=https://github.com/etcd-io/etcd/releases/download
DOWNLOAD_URL=${GOOGLE_URL}
rm -f /tmp/etcd-${ETCD_VER}-darwin-amd64.zip
rm -rf /tmp/etcd-download-test && mkdir -p /tmp/etcd-download-test
curl -L ${DOWNLOAD_URL}/${ETCD_VER}/etcd-${ETCD_VER}-darwin-amd64.zip -o /tmp/etcd-${ETCD_VER}-darwin-amd64.zip
unzip /tmp/etcd-${ETCD_VER}-darwin-amd64.zip -d /tmp && rm -f /tmp/etcd-${ETCD_VER}-darwin-amd64.zip
mv /tmp/etcd-${ETCD_VER}-darwin-amd64/* /tmp/etcd-download-test && rm -rf mv /tmp/etcd-${ETCD_VER}-darwin-amd64
/tmp/etcd-download-test/etcd --version
/tmp/etcd-download-test/etcdctl version
/tmp/etcd-download-test/etcdutl version
Docker
etcd uses gcr.io/etcd-development/etcd as a primary container registry, and quay.io/coreos/etcd as secondary.
ETCD_VER=v3.6.10
rm -rf /tmp/etcd-data.tmp && mkdir -p /tmp/etcd-data.tmp && \
docker rmi gcr.io/etcd-development/etcd:${ETCD_VER} || true && \
docker run \
-p 2379:2379 \
-p 2380:2380 \
--mount type=bind,source=/tmp/etcd-data.tmp,destination=/etcd-data \
--name etcd-gcr-${ETCD_VER} \
gcr.io/etcd-development/etcd:${ETCD_VER} \
/usr/local/bin/etcd \
--name s1 \
--data-dir /etcd-data \
--listen-client-urls http://0.0.0.0:2379 \
--advertise-client-urls http://0.0.0.0:2379 \
--listen-peer-urls http://0.0.0.0:2380 \
--initial-advertise-peer-urls http://0.0.0.0:2380 \
--initial-cluster s1=http://0.0.0.0:2380 \
--initial-cluster-token tkn \
--initial-cluster-state new \
--log-level info \
--logger zap \
--log-outputs stderr
docker exec etcd-gcr-${ETCD_VER} /usr/local/bin/etcd --version
docker exec etcd-gcr-${ETCD_VER} /usr/local/bin/etcdctl version
docker exec etcd-gcr-${ETCD_VER} /usr/local/bin/etcdutl version
docker exec etcd-gcr-${ETCD_VER} /usr/local/bin/etcdctl endpoint health
docker exec etcd-gcr-${ETCD_VER} /usr/local/bin/etcdctl put foo bar
docker exec etcd-gcr-${ETCD_VER} /usr/local/bin/etcdctl get foo |
| 3.6.9 | 20. marca 2026 | — | 64-bit ZIP Zoznam zmienPlease check out CHANGELOG for a full list of changes. And make sure to read upgrade guide before upgrading etcd (there may be breaking changes).
For installation guides, please check out play.etcd.io and operating etcd. Latest support status for common architectures and operating systems can be found at supported platforms.
Linux
ETCD_VER=v3.6.9
# choose either URL
GOOGLE_URL=https://storage.googleapis.com/etcd
GITHUB_URL=https://github.com/etcd-io/etcd/releases/download
DOWNLOAD_URL=${GOOGLE_URL}
rm -f /tmp/etcd-${ETCD_VER}-linux-amd64.tar.gz
rm -rf /tmp/etcd-download-test && mkdir -p /tmp/etcd-download-test
curl -L ${DOWNLOAD_URL}/${ETCD_VER}/etcd-${ETCD_VER}-linux-amd64.tar.gz -o /tmp/etcd-${ETCD_VER}-linux-amd64.tar.gz
tar xzvf /tmp/etcd-${ETCD_VER}-linux-amd64.tar.gz -C /tmp/etcd-download-test --strip-components=1 --no-same-owner
rm -f /tmp/etcd-${ETCD_VER}-linux-amd64.tar.gz
/tmp/etcd-download-test/etcd --version
/tmp/etcd-download-test/etcdctl version
/tmp/etcd-download-test/etcdutl version
# start a local etcd server
/tmp/etcd-download-test/etcd
# write,read to etcd
/tmp/etcd-download-test/etcdctl --endpoints=localhost:2379 put foo bar
/tmp/etcd-download-test/etcdctl --endpoints=localhost:2379 get foo
macOS (Darwin)
ETCD_VER=v3.6.9
# choose either URL
GOOGLE_URL=https://storage.googleapis.com/etcd
GITHUB_URL=https://github.com/etcd-io/etcd/releases/download
DOWNLOAD_URL=${GOOGLE_URL}
rm -f /tmp/etcd-${ETCD_VER}-darwin-amd64.zip
rm -rf /tmp/etcd-download-test && mkdir -p /tmp/etcd-download-test
curl -L ${DOWNLOAD_URL}/${ETCD_VER}/etcd-${ETCD_VER}-darwin-amd64.zip -o /tmp/etcd-${ETCD_VER}-darwin-amd64.zip
unzip /tmp/etcd-${ETCD_VER}-darwin-amd64.zip -d /tmp && rm -f /tmp/etcd-${ETCD_VER}-darwin-amd64.zip
mv /tmp/etcd-${ETCD_VER}-darwin-amd64/* /tmp/etcd-download-test && rm -rf mv /tmp/etcd-${ETCD_VER}-darwin-amd64
/tmp/etcd-download-test/etcd --version
/tmp/etcd-download-test/etcdctl version
/tmp/etcd-download-test/etcdutl version
Docker
etcd uses gcr.io/etcd-development/etcd as a primary container registry, and quay.io/coreos/etcd as secondary.
ETCD_VER=v3.6.9
rm -rf /tmp/etcd-data.tmp && mkdir -p /tmp/etcd-data.tmp && \
docker rmi gcr.io/etcd-development/etcd:${ETCD_VER} || true && \
docker run \
-p 2379:2379 \
-p 2380:2380 \
--mount type=bind,source=/tmp/etcd-data.tmp,destination=/etcd-data \
--name etcd-gcr-${ETCD_VER} \
gcr.io/etcd-development/etcd:${ETCD_VER} \
/usr/local/bin/etcd \
--name s1 \
--data-dir /etcd-data \
--listen-client-urls http://0.0.0.0:2379 \
--advertise-client-urls http://0.0.0.0:2379 \
--listen-peer-urls http://0.0.0.0:2380 \
--initial-advertise-peer-urls http://0.0.0.0:2380 \
--initial-cluster s1=http://0.0.0.0:2380 \
--initial-cluster-token tkn \
--initial-cluster-state new \
--log-level info \
--logger zap \
--log-outputs stderr
docker exec etcd-gcr-${ETCD_VER} /usr/local/bin/etcd --version
docker exec etcd-gcr-${ETCD_VER} /usr/local/bin/etcdctl version
docker exec etcd-gcr-${ETCD_VER} /usr/local/bin/etcdutl version
docker exec etcd-gcr-${ETCD_VER} /usr/local/bin/etcdctl endpoint health
docker exec etcd-gcr-${ETCD_VER} /usr/local/bin/etcdctl put foo bar
docker exec etcd-gcr-${ETCD_VER} /usr/local/bin/etcdctl get foo |
| 3.6.8 | 13. februára 2026 | — | 64-bit ZIP Zoznam zmienPlease check out CHANGELOG for a full list of changes. And make sure to read upgrade guide before upgrading etcd (there may be breaking changes).
For installation guides, please check out play.etcd.io and operating etcd. Latest support status for common architectures and operating systems can be found at supported platforms.
Linux
ETCD_VER=v3.6.8
# choose either URL
GOOGLE_URL=https://storage.googleapis.com/etcd
GITHUB_URL=https://github.com/etcd-io/etcd/releases/download
DOWNLOAD_URL=${GOOGLE_URL}
rm -f /tmp/etcd-${ETCD_VER}-linux-amd64.tar.gz
rm -rf /tmp/etcd-download-test && mkdir -p /tmp/etcd-download-test
curl -L ${DOWNLOAD_URL}/${ETCD_VER}/etcd-${ETCD_VER}-linux-amd64.tar.gz -o /tmp/etcd-${ETCD_VER}-linux-amd64.tar.gz
tar xzvf /tmp/etcd-${ETCD_VER}-linux-amd64.tar.gz -C /tmp/etcd-download-test --strip-components=1 --no-same-owner
rm -f /tmp/etcd-${ETCD_VER}-linux-amd64.tar.gz
/tmp/etcd-download-test/etcd --version
/tmp/etcd-download-test/etcdctl version
/tmp/etcd-download-test/etcdutl version
# start a local etcd server
/tmp/etcd-download-test/etcd
# write,read to etcd
/tmp/etcd-download-test/etcdctl --endpoints=localhost:2379 put foo bar
/tmp/etcd-download-test/etcdctl --endpoints=localhost:2379 get foo
macOS (Darwin)
ETCD_VER=v3.6.8
# choose either URL
GOOGLE_URL=https://storage.googleapis.com/etcd
GITHUB_URL=https://github.com/etcd-io/etcd/releases/download
DOWNLOAD_URL=${GOOGLE_URL}
rm -f /tmp/etcd-${ETCD_VER}-darwin-amd64.zip
rm -rf /tmp/etcd-download-test && mkdir -p /tmp/etcd-download-test
curl -L ${DOWNLOAD_URL}/${ETCD_VER}/etcd-${ETCD_VER}-darwin-amd64.zip -o /tmp/etcd-${ETCD_VER}-darwin-amd64.zip
unzip /tmp/etcd-${ETCD_VER}-darwin-amd64.zip -d /tmp && rm -f /tmp/etcd-${ETCD_VER}-darwin-amd64.zip
mv /tmp/etcd-${ETCD_VER}-darwin-amd64/* /tmp/etcd-download-test && rm -rf mv /tmp/etcd-${ETCD_VER}-darwin-amd64
/tmp/etcd-download-test/etcd --version
/tmp/etcd-download-test/etcdctl version
/tmp/etcd-download-test/etcdutl version
Docker
etcd uses gcr.io/etcd-development/etcd as a primary container registry, and quay.io/coreos/etcd as secondary.
ETCD_VER=v3.6.8
rm -rf /tmp/etcd-data.tmp && mkdir -p /tmp/etcd-data.tmp && \
docker rmi gcr.io/etcd-development/etcd:${ETCD_VER} || true && \
docker run \
-p 2379:2379 \
-p 2380:2380 \
--mount type=bind,source=/tmp/etcd-data.tmp,destination=/etcd-data \
--name etcd-gcr-${ETCD_VER} \
gcr.io/etcd-development/etcd:${ETCD_VER} \
/usr/local/bin/etcd \
--name s1 \
--data-dir /etcd-data \
--listen-client-urls http://0.0.0.0:2379 \
--advertise-client-urls http://0.0.0.0:2379 \
--listen-peer-urls http://0.0.0.0:2380 \
--initial-advertise-peer-urls http://0.0.0.0:2380 \
--initial-cluster s1=http://0.0.0.0:2380 \
--initial-cluster-token tkn \
--initial-cluster-state new \
--log-level info \
--logger zap \
--log-outputs stderr
docker exec etcd-gcr-${ETCD_VER} /usr/local/bin/etcd --version
docker exec etcd-gcr-${ETCD_VER} /usr/local/bin/etcdctl version
docker exec etcd-gcr-${ETCD_VER} /usr/local/bin/etcdutl version
docker exec etcd-gcr-${ETCD_VER} /usr/local/bin/etcdctl endpoint health
docker exec etcd-gcr-${ETCD_VER} /usr/local/bin/etcdctl put foo bar
docker exec etcd-gcr-${ETCD_VER} /usr/local/bin/etcdctl get foo |
| 3.6.7 | 17. decembra 2025 | — | 64-bit ZIP Zoznam zmienPlease check out CHANGELOG for a full list of changes. And make sure to read upgrade guide before upgrading etcd (there may be breaking changes).
For installation guides, please check out play.etcd.io and operating etcd. Latest support status for common architectures and operating systems can be found at supported platforms.
Linux
ETCD_VER=v3.6.7
# choose either URL
GOOGLE_URL=https://storage.googleapis.com/etcd
GITHUB_URL=https://github.com/etcd-io/etcd/releases/download
DOWNLOAD_URL=${GOOGLE_URL}
rm -f /tmp/etcd-${ETCD_VER}-linux-amd64.tar.gz
rm -rf /tmp/etcd-download-test && mkdir -p /tmp/etcd-download-test
curl -L ${DOWNLOAD_URL}/${ETCD_VER}/etcd-${ETCD_VER}-linux-amd64.tar.gz -o /tmp/etcd-${ETCD_VER}-linux-amd64.tar.gz
tar xzvf /tmp/etcd-${ETCD_VER}-linux-amd64.tar.gz -C /tmp/etcd-download-test --strip-components=1 --no-same-owner
rm -f /tmp/etcd-${ETCD_VER}-linux-amd64.tar.gz
/tmp/etcd-download-test/etcd --version
/tmp/etcd-download-test/etcdctl version
/tmp/etcd-download-test/etcdutl version
# start a local etcd server
/tmp/etcd-download-test/etcd
# write,read to etcd
/tmp/etcd-download-test/etcdctl --endpoints=localhost:2379 put foo bar
/tmp/etcd-download-test/etcdctl --endpoints=localhost:2379 get foo
macOS (Darwin)
ETCD_VER=v3.6.7
# choose either URL
GOOGLE_URL=https://storage.googleapis.com/etcd
GITHUB_URL=https://github.com/etcd-io/etcd/releases/download
DOWNLOAD_URL=${GOOGLE_URL}
rm -f /tmp/etcd-${ETCD_VER}-darwin-amd64.zip
rm -rf /tmp/etcd-download-test && mkdir -p /tmp/etcd-download-test
curl -L ${DOWNLOAD_URL}/${ETCD_VER}/etcd-${ETCD_VER}-darwin-amd64.zip -o /tmp/etcd-${ETCD_VER}-darwin-amd64.zip
unzip /tmp/etcd-${ETCD_VER}-darwin-amd64.zip -d /tmp && rm -f /tmp/etcd-${ETCD_VER}-darwin-amd64.zip
mv /tmp/etcd-${ETCD_VER}-darwin-amd64/* /tmp/etcd-download-test && rm -rf mv /tmp/etcd-${ETCD_VER}-darwin-amd64
/tmp/etcd-download-test/etcd --version
/tmp/etcd-download-test/etcdctl version
/tmp/etcd-download-test/etcdutl version
Docker
etcd uses gcr.io/etcd-development/etcd as a primary container registry, and quay.io/coreos/etcd as secondary.
ETCD_VER=v3.6.7
rm -rf /tmp/etcd-data.tmp && mkdir -p /tmp/etcd-data.tmp && \
docker rmi gcr.io/etcd-development/etcd:${ETCD_VER} || true && \
docker run \
-p 2379:2379 \
-p 2380:2380 \
--mount type=bind,source=/tmp/etcd-data.tmp,destination=/etcd-data \
--name etcd-gcr-${ETCD_VER} \
gcr.io/etcd-development/etcd:${ETCD_VER} \
/usr/local/bin/etcd \
--name s1 \
--data-dir /etcd-data \
--listen-client-urls http://0.0.0.0:2379 \
--advertise-client-urls http://0.0.0.0:2379 \
--listen-peer-urls http://0.0.0.0:2380 \
--initial-advertise-peer-urls http://0.0.0.0:2380 \
--initial-cluster s1=http://0.0.0.0:2380 \
--initial-cluster-token tkn \
--initial-cluster-state new \
--log-level info \
--logger zap \
--log-outputs stderr
docker exec etcd-gcr-${ETCD_VER} /usr/local/bin/etcd --version
docker exec etcd-gcr-${ETCD_VER} /usr/local/bin/etcdctl version
docker exec etcd-gcr-${ETCD_VER} /usr/local/bin/etcdutl version
docker exec etcd-gcr-${ETCD_VER} /usr/local/bin/etcdctl endpoint health
docker exec etcd-gcr-${ETCD_VER} /usr/local/bin/etcdctl put foo bar
docker exec etcd-gcr-${ETCD_VER} /usr/local/bin/etcdctl get foo |
| 3.6.6 | 12. novembra 2025 | — | 64-bit ZIP Zoznam zmienPlease check out CHANGELOG for a full list of changes. And make sure to read upgrade guide before upgrading etcd (there may be breaking changes).
For installation guides, please check out play.etcd.io and operating etcd. Latest support status for common architectures and operating systems can be found at supported platforms.
Linux
ETCD_VER=v3.6.6
# choose either URL
GOOGLE_URL=https://storage.googleapis.com/etcd
GITHUB_URL=https://github.com/etcd-io/etcd/releases/download
DOWNLOAD_URL=${GOOGLE_URL}
rm -f /tmp/etcd-${ETCD_VER}-linux-amd64.tar.gz
rm -rf /tmp/etcd-download-test && mkdir -p /tmp/etcd-download-test
curl -L ${DOWNLOAD_URL}/${ETCD_VER}/etcd-${ETCD_VER}-linux-amd64.tar.gz -o /tmp/etcd-${ETCD_VER}-linux-amd64.tar.gz
tar xzvf /tmp/etcd-${ETCD_VER}-linux-amd64.tar.gz -C /tmp/etcd-download-test --strip-components=1 --no-same-owner
rm -f /tmp/etcd-${ETCD_VER}-linux-amd64.tar.gz
/tmp/etcd-download-test/etcd --version
/tmp/etcd-download-test/etcdctl version
/tmp/etcd-download-test/etcdutl version
# start a local etcd server
/tmp/etcd-download-test/etcd
# write,read to etcd
/tmp/etcd-download-test/etcdctl --endpoints=localhost:2379 put foo bar
/tmp/etcd-download-test/etcdctl --endpoints=localhost:2379 get foo
macOS (Darwin)
ETCD_VER=v3.6.6
# choose either URL
GOOGLE_URL=https://storage.googleapis.com/etcd
GITHUB_URL=https://github.com/etcd-io/etcd/releases/download
DOWNLOAD_URL=${GOOGLE_URL}
rm -f /tmp/etcd-${ETCD_VER}-darwin-amd64.zip
rm -rf /tmp/etcd-download-test && mkdir -p /tmp/etcd-download-test
curl -L ${DOWNLOAD_URL}/${ETCD_VER}/etcd-${ETCD_VER}-darwin-amd64.zip -o /tmp/etcd-${ETCD_VER}-darwin-amd64.zip
unzip /tmp/etcd-${ETCD_VER}-darwin-amd64.zip -d /tmp && rm -f /tmp/etcd-${ETCD_VER}-darwin-amd64.zip
mv /tmp/etcd-${ETCD_VER}-darwin-amd64/* /tmp/etcd-download-test && rm -rf mv /tmp/etcd-${ETCD_VER}-darwin-amd64
/tmp/etcd-download-test/etcd --version
/tmp/etcd-download-test/etcdctl version
/tmp/etcd-download-test/etcdutl version
Docker
etcd uses gcr.io/etcd-development/etcd as a primary container registry, and quay.io/coreos/etcd as secondary.
ETCD_VER=v3.6.6
rm -rf /tmp/etcd-data.tmp && mkdir -p /tmp/etcd-data.tmp && \
docker rmi gcr.io/etcd-development/etcd:${ETCD_VER} || true && \
docker run \
-p 2379:2379 \
-p 2380:2380 \
--mount type=bind,source=/tmp/etcd-data.tmp,destination=/etcd-data \
--name etcd-gcr-${ETCD_VER} \
gcr.io/etcd-development/etcd:${ETCD_VER} \
/usr/local/bin/etcd \
--name s1 \
--data-dir /etcd-data \
--listen-client-urls http://0.0.0.0:2379 \
--advertise-client-urls http://0.0.0.0:2379 \
--listen-peer-urls http://0.0.0.0:2380 \
--initial-advertise-peer-urls http://0.0.0.0:2380 \
--initial-cluster s1=http://0.0.0.0:2380 \
--initial-cluster-token tkn \
--initial-cluster-state new \
--log-level info \
--logger zap \
--log-outputs stderr
docker exec etcd-gcr-${ETCD_VER} /usr/local/bin/etcd --version
docker exec etcd-gcr-${ETCD_VER} /usr/local/bin/etcdctl version
docker exec etcd-gcr-${ETCD_VER} /usr/local/bin/etcdutl version
docker exec etcd-gcr-${ETCD_VER} /usr/local/bin/etcdctl endpoint health
docker exec etcd-gcr-${ETCD_VER} /usr/local/bin/etcdctl put foo bar
docker exec etcd-gcr-${ETCD_VER} /usr/local/bin/etcdctl get foo |
| 3.6.5 | 19. septembra 2025 | — | 64-bit ZIP Zoznam zmienPlease check out CHANGELOG for a full list of changes. And make sure to read upgrade guide before upgrading etcd (there may be breaking changes).
For installation guides, please check out play.etcd.io and operating etcd. Latest support status for common architectures and operating systems can be found at supported platforms.
Linux
ETCD_VER=v3.6.5
# choose either URL
GOOGLE_URL=https://storage.googleapis.com/etcd
GITHUB_URL=https://github.com/etcd-io/etcd/releases/download
DOWNLOAD_URL=${GOOGLE_URL}
rm -f /tmp/etcd-${ETCD_VER}-linux-amd64.tar.gz
rm -rf /tmp/etcd-download-test && mkdir -p /tmp/etcd-download-test
curl -L ${DOWNLOAD_URL}/${ETCD_VER}/etcd-${ETCD_VER}-linux-amd64.tar.gz -o /tmp/etcd-${ETCD_VER}-linux-amd64.tar.gz
tar xzvf /tmp/etcd-${ETCD_VER}-linux-amd64.tar.gz -C /tmp/etcd-download-test --strip-components=1 --no-same-owner
rm -f /tmp/etcd-${ETCD_VER}-linux-amd64.tar.gz
/tmp/etcd-download-test/etcd --version
/tmp/etcd-download-test/etcdctl version
/tmp/etcd-download-test/etcdutl version
# start a local etcd server
/tmp/etcd-download-test/etcd
# write,read to etcd
/tmp/etcd-download-test/etcdctl --endpoints=localhost:2379 put foo bar
/tmp/etcd-download-test/etcdctl --endpoints=localhost:2379 get foo
macOS (Darwin)
ETCD_VER=v3.6.5
# choose either URL
GOOGLE_URL=https://storage.googleapis.com/etcd
GITHUB_URL=https://github.com/etcd-io/etcd/releases/download
DOWNLOAD_URL=${GOOGLE_URL}
rm -f /tmp/etcd-${ETCD_VER}-darwin-amd64.zip
rm -rf /tmp/etcd-download-test && mkdir -p /tmp/etcd-download-test
curl -L ${DOWNLOAD_URL}/${ETCD_VER}/etcd-${ETCD_VER}-darwin-amd64.zip -o /tmp/etcd-${ETCD_VER}-darwin-amd64.zip
unzip /tmp/etcd-${ETCD_VER}-darwin-amd64.zip -d /tmp && rm -f /tmp/etcd-${ETCD_VER}-darwin-amd64.zip
mv /tmp/etcd-${ETCD_VER}-darwin-amd64/* /tmp/etcd-download-test && rm -rf mv /tmp/etcd-${ETCD_VER}-darwin-amd64
/tmp/etcd-download-test/etcd --version
/tmp/etcd-download-test/etcdctl version
/tmp/etcd-download-test/etcdutl version
Docker
etcd uses gcr.io/etcd-development/etcd as a primary container registry, and quay.io/coreos/etcd as secondary.
ETCD_VER=v3.6.5
rm -rf /tmp/etcd-data.tmp && mkdir -p /tmp/etcd-data.tmp && \
docker rmi gcr.io/etcd-development/etcd:${ETCD_VER} || true && \
docker run \
-p 2379:2379 \
-p 2380:2380 \
--mount type=bind,source=/tmp/etcd-data.tmp,destination=/etcd-data \
--name etcd-gcr-${ETCD_VER} \
gcr.io/etcd-development/etcd:${ETCD_VER} \
/usr/local/bin/etcd \
--name s1 \
--data-dir /etcd-data \
--listen-client-urls http://0.0.0.0:2379 \
--advertise-client-urls http://0.0.0.0:2379 \
--listen-peer-urls http://0.0.0.0:2380 \
--initial-advertise-peer-urls http://0.0.0.0:2380 \
--initial-cluster s1=http://0.0.0.0:2380 \
--initial-cluster-token tkn \
--initial-cluster-state new \
--log-level info \
--logger zap \
--log-outputs stderr
docker exec etcd-gcr-${ETCD_VER} /usr/local/bin/etcd --version
docker exec etcd-gcr-${ETCD_VER} /usr/local/bin/etcdctl version
docker exec etcd-gcr-${ETCD_VER} /usr/local/bin/etcdutl version
docker exec etcd-gcr-${ETCD_VER} /usr/local/bin/etcdctl endpoint health
docker exec etcd-gcr-${ETCD_VER} /usr/local/bin/etcdctl put foo bar
docker exec etcd-gcr-${ETCD_VER} /usr/local/bin/etcdctl get foo |
| 3.6.4 | 25. júla 2025 | — | 64-bit ZIP Zoznam zmienPlease check out CHANGELOG for a full list of changes. And make sure to read upgrade guide before upgrading etcd (there may be breaking changes).
For installation guides, please check out play.etcd.io and operating etcd. Latest support status for common architectures and operating systems can be found at supported platforms.
Linux
ETCD_VER=v3.6.4
# choose either URL
GOOGLE_URL=https://storage.googleapis.com/etcd
GITHUB_URL=https://github.com/etcd-io/etcd/releases/download
DOWNLOAD_URL=${GOOGLE_URL}
rm -f /tmp/etcd-${ETCD_VER}-linux-amd64.tar.gz
rm -rf /tmp/etcd-download-test && mkdir -p /tmp/etcd-download-test
curl -L ${DOWNLOAD_URL}/${ETCD_VER}/etcd-${ETCD_VER}-linux-amd64.tar.gz -o /tmp/etcd-${ETCD_VER}-linux-amd64.tar.gz
tar xzvf /tmp/etcd-${ETCD_VER}-linux-amd64.tar.gz -C /tmp/etcd-download-test --strip-components=1 --no-same-owner
rm -f /tmp/etcd-${ETCD_VER}-linux-amd64.tar.gz
/tmp/etcd-download-test/etcd --version
/tmp/etcd-download-test/etcdctl version
/tmp/etcd-download-test/etcdutl version
# start a local etcd server
/tmp/etcd-download-test/etcd
# write,read to etcd
/tmp/etcd-download-test/etcdctl --endpoints=localhost:2379 put foo bar
/tmp/etcd-download-test/etcdctl --endpoints=localhost:2379 get foo
macOS (Darwin)
ETCD_VER=v3.6.4
# choose either URL
GOOGLE_URL=https://storage.googleapis.com/etcd
GITHUB_URL=https://github.com/etcd-io/etcd/releases/download
DOWNLOAD_URL=${GOOGLE_URL}
rm -f /tmp/etcd-${ETCD_VER}-darwin-amd64.zip
rm -rf /tmp/etcd-download-test && mkdir -p /tmp/etcd-download-test
curl -L ${DOWNLOAD_URL}/${ETCD_VER}/etcd-${ETCD_VER}-darwin-amd64.zip -o /tmp/etcd-${ETCD_VER}-darwin-amd64.zip
unzip /tmp/etcd-${ETCD_VER}-darwin-amd64.zip -d /tmp && rm -f /tmp/etcd-${ETCD_VER}-darwin-amd64.zip
mv /tmp/etcd-${ETCD_VER}-darwin-amd64/* /tmp/etcd-download-test && rm -rf mv /tmp/etcd-${ETCD_VER}-darwin-amd64
/tmp/etcd-download-test/etcd --version
/tmp/etcd-download-test/etcdctl version
/tmp/etcd-download-test/etcdutl version
Docker
etcd uses gcr.io/etcd-development/etcd as a primary container registry, and quay.io/coreos/etcd as secondary.
ETCD_VER=v3.6.4
rm -rf /tmp/etcd-data.tmp && mkdir -p /tmp/etcd-data.tmp && \
docker rmi gcr.io/etcd-development/etcd:${ETCD_VER} || true && \
docker run \
-p 2379:2379 \
-p 2380:2380 \
--mount type=bind,source=/tmp/etcd-data.tmp,destination=/etcd-data \
--name etcd-gcr-${ETCD_VER} \
gcr.io/etcd-development/etcd:${ETCD_VER} \
/usr/local/bin/etcd \
--name s1 \
--data-dir /etcd-data \
--listen-client-urls http://0.0.0.0:2379 \
--advertise-client-urls http://0.0.0.0:2379 \
--listen-peer-urls http://0.0.0.0:2380 \
--initial-advertise-peer-urls http://0.0.0.0:2380 \
--initial-cluster s1=http://0.0.0.0:2380 \
--initial-cluster-token tkn \
--initial-cluster-state new \
--log-level info \
--logger zap \
--log-outputs stderr
docker exec etcd-gcr-${ETCD_VER} /usr/local/bin/etcd --version
docker exec etcd-gcr-${ETCD_VER} /usr/local/bin/etcdctl version
docker exec etcd-gcr-${ETCD_VER} /usr/local/bin/etcdutl version
docker exec etcd-gcr-${ETCD_VER} /usr/local/bin/etcdctl endpoint health
docker exec etcd-gcr-${ETCD_VER} /usr/local/bin/etcdctl put foo bar
docker exec etcd-gcr-${ETCD_VER} /usr/local/bin/etcdctl get foo |
| 3.6.3 | 22. júla 2025 | — | 64-bit ZIP Zoznam zmienPlease check out CHANGELOG for a full list of changes. And make sure to read upgrade guide before upgrading etcd (there may be breaking changes).
For installation guides, please check out play.etcd.io and operating etcd. Latest support status for common architectures and operating systems can be found at supported platforms.
Linux
ETCD_VER=v3.6.3
# choose either URL
GOOGLE_URL=https://storage.googleapis.com/etcd
GITHUB_URL=https://github.com/etcd-io/etcd/releases/download
DOWNLOAD_URL=${GOOGLE_URL}
rm -f /tmp/etcd-${ETCD_VER}-linux-amd64.tar.gz
rm -rf /tmp/etcd-download-test && mkdir -p /tmp/etcd-download-test
curl -L ${DOWNLOAD_URL}/${ETCD_VER}/etcd-${ETCD_VER}-linux-amd64.tar.gz -o /tmp/etcd-${ETCD_VER}-linux-amd64.tar.gz
tar xzvf /tmp/etcd-${ETCD_VER}-linux-amd64.tar.gz -C /tmp/etcd-download-test --strip-components=1 --no-same-owner
rm -f /tmp/etcd-${ETCD_VER}-linux-amd64.tar.gz
/tmp/etcd-download-test/etcd --version
/tmp/etcd-download-test/etcdctl version
/tmp/etcd-download-test/etcdutl version
# start a local etcd server
/tmp/etcd-download-test/etcd
# write,read to etcd
/tmp/etcd-download-test/etcdctl --endpoints=localhost:2379 put foo bar
/tmp/etcd-download-test/etcdctl --endpoints=localhost:2379 get foo
macOS (Darwin)
ETCD_VER=v3.6.3
# choose either URL
GOOGLE_URL=https://storage.googleapis.com/etcd
GITHUB_URL=https://github.com/etcd-io/etcd/releases/download
DOWNLOAD_URL=${GOOGLE_URL}
rm -f /tmp/etcd-${ETCD_VER}-darwin-amd64.zip
rm -rf /tmp/etcd-download-test && mkdir -p /tmp/etcd-download-test
curl -L ${DOWNLOAD_URL}/${ETCD_VER}/etcd-${ETCD_VER}-darwin-amd64.zip -o /tmp/etcd-${ETCD_VER}-darwin-amd64.zip
unzip /tmp/etcd-${ETCD_VER}-darwin-amd64.zip -d /tmp && rm -f /tmp/etcd-${ETCD_VER}-darwin-amd64.zip
mv /tmp/etcd-${ETCD_VER}-darwin-amd64/* /tmp/etcd-download-test && rm -rf mv /tmp/etcd-${ETCD_VER}-darwin-amd64
/tmp/etcd-download-test/etcd --version
/tmp/etcd-download-test/etcdctl version
/tmp/etcd-download-test/etcdutl version
Docker
etcd uses gcr.io/etcd-development/etcd as a primary container registry, and quay.io/coreos/etcd as secondary.
ETCD_VER=v3.6.3
rm -rf /tmp/etcd-data.tmp && mkdir -p /tmp/etcd-data.tmp && \
docker rmi gcr.io/etcd-development/etcd:${ETCD_VER} || true && \
docker run \
-p 2379:2379 \
-p 2380:2380 \
--mount type=bind,source=/tmp/etcd-data.tmp,destination=/etcd-data \
--name etcd-gcr-${ETCD_VER} \
gcr.io/etcd-development/etcd:${ETCD_VER} \
/usr/local/bin/etcd \
--name s1 \
--data-dir /etcd-data \
--listen-client-urls http://0.0.0.0:2379 \
--advertise-client-urls http://0.0.0.0:2379 \
--listen-peer-urls http://0.0.0.0:2380 \
--initial-advertise-peer-urls http://0.0.0.0:2380 \
--initial-cluster s1=http://0.0.0.0:2380 \
--initial-cluster-token tkn \
--initial-cluster-state new \
--log-level info \
--logger zap \
--log-outputs stderr
docker exec etcd-gcr-${ETCD_VER} /usr/local/bin/etcd --version
docker exec etcd-gcr-${ETCD_VER} /usr/local/bin/etcdctl version
docker exec etcd-gcr-${ETCD_VER} /usr/local/bin/etcdutl version
docker exec etcd-gcr-${ETCD_VER} /usr/local/bin/etcdctl endpoint health
docker exec etcd-gcr-${ETCD_VER} /usr/local/bin/etcdctl put foo bar
docker exec etcd-gcr-${ETCD_VER} /usr/local/bin/etcdctl get foo |
| 3.6.2 | 10. júla 2025 | — | 64-bit ZIP Zoznam zmienPlease check out CHANGELOG for a full list of changes. And make sure to read upgrade guide before upgrading etcd (there may be breaking changes).
For installation guides, please check out play.etcd.io and operating etcd. Latest support status for common architectures and operating systems can be found at supported platforms.
Linux
ETCD_VER=v3.6.2
# choose either URL
GOOGLE_URL=https://storage.googleapis.com/etcd
GITHUB_URL=https://github.com/etcd-io/etcd/releases/download
DOWNLOAD_URL=${GOOGLE_URL}
rm -f /tmp/etcd-${ETCD_VER}-linux-amd64.tar.gz
rm -rf /tmp/etcd-download-test && mkdir -p /tmp/etcd-download-test
curl -L ${DOWNLOAD_URL}/${ETCD_VER}/etcd-${ETCD_VER}-linux-amd64.tar.gz -o /tmp/etcd-${ETCD_VER}-linux-amd64.tar.gz
tar xzvf /tmp/etcd-${ETCD_VER}-linux-amd64.tar.gz -C /tmp/etcd-download-test --strip-components=1 --no-same-owner
rm -f /tmp/etcd-${ETCD_VER}-linux-amd64.tar.gz
/tmp/etcd-download-test/etcd --version
/tmp/etcd-download-test/etcdctl version
/tmp/etcd-download-test/etcdutl version
# start a local etcd server
/tmp/etcd-download-test/etcd
# write,read to etcd
/tmp/etcd-download-test/etcdctl --endpoints=localhost:2379 put foo bar
/tmp/etcd-download-test/etcdctl --endpoints=localhost:2379 get foo
macOS (Darwin)
ETCD_VER=v3.6.2
# choose either URL
GOOGLE_URL=https://storage.googleapis.com/etcd
GITHUB_URL=https://github.com/etcd-io/etcd/releases/download
DOWNLOAD_URL=${GOOGLE_URL}
rm -f /tmp/etcd-${ETCD_VER}-darwin-amd64.zip
rm -rf /tmp/etcd-download-test && mkdir -p /tmp/etcd-download-test
curl -L ${DOWNLOAD_URL}/${ETCD_VER}/etcd-${ETCD_VER}-darwin-amd64.zip -o /tmp/etcd-${ETCD_VER}-darwin-amd64.zip
unzip /tmp/etcd-${ETCD_VER}-darwin-amd64.zip -d /tmp && rm -f /tmp/etcd-${ETCD_VER}-darwin-amd64.zip
mv /tmp/etcd-${ETCD_VER}-darwin-amd64/* /tmp/etcd-download-test && rm -rf mv /tmp/etcd-${ETCD_VER}-darwin-amd64
/tmp/etcd-download-test/etcd --version
/tmp/etcd-download-test/etcdctl version
/tmp/etcd-download-test/etcdutl version
Docker
etcd uses gcr.io/etcd-development/etcd as a primary container registry, and quay.io/coreos/etcd as secondary.
ETCD_VER=v3.6.2
rm -rf /tmp/etcd-data.tmp && mkdir -p /tmp/etcd-data.tmp && \
docker rmi gcr.io/etcd-development/etcd:${ETCD_VER} || true && \
docker run \
-p 2379:2379 \
-p 2380:2380 \
--mount type=bind,source=/tmp/etcd-data.tmp,destination=/etcd-data \
--name etcd-gcr-${ETCD_VER} \
gcr.io/etcd-development/etcd:${ETCD_VER} \
/usr/local/bin/etcd \
--name s1 \
--data-dir /etcd-data \
--listen-client-urls http://0.0.0.0:2379 \
--advertise-client-urls http://0.0.0.0:2379 \
--listen-peer-urls http://0.0.0.0:2380 \
--initial-advertise-peer-urls http://0.0.0.0:2380 \
--initial-cluster s1=http://0.0.0.0:2380 \
--initial-cluster-token tkn \
--initial-cluster-state new \
--log-level info \
--logger zap \
--log-outputs stderr
docker exec etcd-gcr-${ETCD_VER} /usr/local/bin/etcd --version
docker exec etcd-gcr-${ETCD_VER} /usr/local/bin/etcdctl version
docker exec etcd-gcr-${ETCD_VER} /usr/local/bin/etcdutl version
docker exec etcd-gcr-${ETCD_VER} /usr/local/bin/etcdctl endpoint health
docker exec etcd-gcr-${ETCD_VER} /usr/local/bin/etcdctl put foo bar
docker exec etcd-gcr-${ETCD_VER} /usr/local/bin/etcdctl get foo |
| 3.6.1 | 6. júna 2025 | — | 64-bit ZIP Zoznam zmienPlease check out CHANGELOG for a full list of changes. And make sure to read upgrade guide before upgrading etcd (there may be breaking changes).
For installation guides, please check out play.etcd.io and operating etcd. Latest support status for common architectures and operating systems can be found at supported platforms.
Linux
ETCD_VER=v3.6.1
# choose either URL
GOOGLE_URL=https://storage.googleapis.com/etcd
GITHUB_URL=https://github.com/etcd-io/etcd/releases/download
DOWNLOAD_URL=${GOOGLE_URL}
rm -f /tmp/etcd-${ETCD_VER}-linux-amd64.tar.gz
rm -rf /tmp/etcd-download-test && mkdir -p /tmp/etcd-download-test
curl -L ${DOWNLOAD_URL}/${ETCD_VER}/etcd-${ETCD_VER}-linux-amd64.tar.gz -o /tmp/etcd-${ETCD_VER}-linux-amd64.tar.gz
tar xzvf /tmp/etcd-${ETCD_VER}-linux-amd64.tar.gz -C /tmp/etcd-download-test --strip-components=1 --no-same-owner
rm -f /tmp/etcd-${ETCD_VER}-linux-amd64.tar.gz
/tmp/etcd-download-test/etcd --version
/tmp/etcd-download-test/etcdctl version
/tmp/etcd-download-test/etcdutl version
# start a local etcd server
/tmp/etcd-download-test/etcd
# write,read to etcd
/tmp/etcd-download-test/etcdctl --endpoints=localhost:2379 put foo bar
/tmp/etcd-download-test/etcdctl --endpoints=localhost:2379 get foo
macOS (Darwin)
ETCD_VER=v3.6.1
# choose either URL
GOOGLE_URL=https://storage.googleapis.com/etcd
GITHUB_URL=https://github.com/etcd-io/etcd/releases/download
DOWNLOAD_URL=${GOOGLE_URL}
rm -f /tmp/etcd-${ETCD_VER}-darwin-amd64.zip
rm -rf /tmp/etcd-download-test && mkdir -p /tmp/etcd-download-test
curl -L ${DOWNLOAD_URL}/${ETCD_VER}/etcd-${ETCD_VER}-darwin-amd64.zip -o /tmp/etcd-${ETCD_VER}-darwin-amd64.zip
unzip /tmp/etcd-${ETCD_VER}-darwin-amd64.zip -d /tmp && rm -f /tmp/etcd-${ETCD_VER}-darwin-amd64.zip
mv /tmp/etcd-${ETCD_VER}-darwin-amd64/* /tmp/etcd-download-test && rm -rf mv /tmp/etcd-${ETCD_VER}-darwin-amd64
/tmp/etcd-download-test/etcd --version
/tmp/etcd-download-test/etcdctl version
/tmp/etcd-download-test/etcdutl version
Docker
etcd uses gcr.io/etcd-development/etcd as a primary container registry, and quay.io/coreos/etcd as secondary.
ETCD_VER=v3.6.1
rm -rf /tmp/etcd-data.tmp && mkdir -p /tmp/etcd-data.tmp && \
docker rmi gcr.io/etcd-development/etcd:${ETCD_VER} || true && \
docker run \
-p 2379:2379 \
-p 2380:2380 \
--mount type=bind,source=/tmp/etcd-data.tmp,destination=/etcd-data \
--name etcd-gcr-${ETCD_VER} \
gcr.io/etcd-development/etcd:${ETCD_VER} \
/usr/local/bin/etcd \
--name s1 \
--data-dir /etcd-data \
--listen-client-urls http://0.0.0.0:2379 \
--advertise-client-urls http://0.0.0.0:2379 \
--listen-peer-urls http://0.0.0.0:2380 \
--initial-advertise-peer-urls http://0.0.0.0:2380 \
--initial-cluster s1=http://0.0.0.0:2380 \
--initial-cluster-token tkn \
--initial-cluster-state new \
--log-level info \
--logger zap \
--log-outputs stderr
docker exec etcd-gcr-${ETCD_VER} /usr/local/bin/etcd --version
docker exec etcd-gcr-${ETCD_VER} /usr/local/bin/etcdctl version
docker exec etcd-gcr-${ETCD_VER} /usr/local/bin/etcdutl version
docker exec etcd-gcr-${ETCD_VER} /usr/local/bin/etcdctl endpoint health
docker exec etcd-gcr-${ETCD_VER} /usr/local/bin/etcdctl put foo bar
docker exec etcd-gcr-${ETCD_VER} /usr/local/bin/etcdctl get foo |
| 3.6.0 | 15. mája 2025 | — | 64-bit ZIP Zoznam zmienPlease check out CHANGELOG for a full list of changes. And make sure to read upgrade guide before upgrading etcd (there may be breaking changes).
For installation guides, please check out play.etcd.io and operating etcd. Latest support status for common architectures and operating systems can be found at supported platforms.
Linux
ETCD_VER=v3.6.0
# choose either URL
GOOGLE_URL=https://storage.googleapis.com/etcd
GITHUB_URL=https://github.com/etcd-io/etcd/releases/download
DOWNLOAD_URL=${GOOGLE_URL}
rm -f /tmp/etcd-${ETCD_VER}-linux-amd64.tar.gz
rm -rf /tmp/etcd-download-test && mkdir -p /tmp/etcd-download-test
curl -L ${DOWNLOAD_URL}/${ETCD_VER}/etcd-${ETCD_VER}-linux-amd64.tar.gz -o /tmp/etcd-${ETCD_VER}-linux-amd64.tar.gz
tar xzvf /tmp/etcd-${ETCD_VER}-linux-amd64.tar.gz -C /tmp/etcd-download-test --strip-components=1 --no-same-owner
rm -f /tmp/etcd-${ETCD_VER}-linux-amd64.tar.gz
/tmp/etcd-download-test/etcd --version
/tmp/etcd-download-test/etcdctl version
/tmp/etcd-download-test/etcdutl version
# start a local etcd server
/tmp/etcd-download-test/etcd
# write,read to etcd
/tmp/etcd-download-test/etcdctl --endpoints=localhost:2379 put foo bar
/tmp/etcd-download-test/etcdctl --endpoints=localhost:2379 get foo
macOS (Darwin)
ETCD_VER=v3.6.0
# choose either URL
GOOGLE_URL=https://storage.googleapis.com/etcd
GITHUB_URL=https://github.com/etcd-io/etcd/releases/download
DOWNLOAD_URL=${GOOGLE_URL}
rm -f /tmp/etcd-${ETCD_VER}-darwin-amd64.zip
rm -rf /tmp/etcd-download-test && mkdir -p /tmp/etcd-download-test
curl -L ${DOWNLOAD_URL}/${ETCD_VER}/etcd-${ETCD_VER}-darwin-amd64.zip -o /tmp/etcd-${ETCD_VER}-darwin-amd64.zip
unzip /tmp/etcd-${ETCD_VER}-darwin-amd64.zip -d /tmp && rm -f /tmp/etcd-${ETCD_VER}-darwin-amd64.zip
mv /tmp/etcd-${ETCD_VER}-darwin-amd64/* /tmp/etcd-download-test && rm -rf mv /tmp/etcd-${ETCD_VER}-darwin-amd64
/tmp/etcd-download-test/etcd --version
/tmp/etcd-download-test/etcdctl version
/tmp/etcd-download-test/etcdutl version
Docker
etcd uses gcr.io/etcd-development/etcd as a primary container registry, and quay.io/coreos/etcd as secondary.
ETCD_VER=v3.6.0
rm -rf /tmp/etcd-data.tmp && mkdir -p /tmp/etcd-data.tmp && \
docker rmi gcr.io/etcd-development/etcd:${ETCD_VER} || true && \
docker run \
-p 2379:2379 \
-p 2380:2380 \
--mount type=bind,source=/tmp/etcd-data.tmp,destination=/etcd-data \
--name etcd-gcr-${ETCD_VER} \
gcr.io/etcd-development/etcd:${ETCD_VER} \
/usr/local/bin/etcd \
--name s1 \
--data-dir /etcd-data \
--listen-client-urls http://0.0.0.0:2379 \
--advertise-client-urls http://0.0.0.0:2379 \
--listen-peer-urls http://0.0.0.0:2380 \
--initial-advertise-peer-urls http://0.0.0.0:2380 \
--initial-cluster s1=http://0.0.0.0:2380 \
--initial-cluster-token tkn \
--initial-cluster-state new \
--log-level info \
--logger zap \
--log-outputs stderr
docker exec etcd-gcr-${ETCD_VER} /usr/local/bin/etcd --version
docker exec etcd-gcr-${ETCD_VER} /usr/local/bin/etcdctl version
docker exec etcd-gcr-${ETCD_VER} /usr/local/bin/etcdutl version
docker exec etcd-gcr-${ETCD_VER} /usr/local/bin/etcdctl endpoint health
docker exec etcd-gcr-${ETCD_VER} /usr/local/bin/etcdctl put foo bar
docker exec etcd-gcr-${ETCD_VER} /usr/local/bin/etcdctl get foo |
| 3.5.21 | 27. marca 2025 | — | 64-bit ZIP Zoznam zmienPlease check out CHANGELOG for a full list of changes. And make sure to read upgrade guide before upgrading etcd (there may be breaking changes).
For installation guides, please check out play.etcd.io and operating etcd. Latest support status for common architectures and operating systems can be found at supported platforms.
Linux
ETCD_VER=v3.5.21
# choose either URL
GOOGLE_URL=https://storage.googleapis.com/etcd
GITHUB_URL=https://github.com/etcd-io/etcd/releases/download
DOWNLOAD_URL=${GOOGLE_URL}
rm -f /tmp/etcd-${ETCD_VER}-linux-amd64.tar.gz
rm -rf /tmp/etcd-download-test && mkdir -p /tmp/etcd-download-test
curl -L ${DOWNLOAD_URL}/${ETCD_VER}/etcd-${ETCD_VER}-linux-amd64.tar.gz -o /tmp/etcd-${ETCD_VER}-linux-amd64.tar.gz
tar xzvf /tmp/etcd-${ETCD_VER}-linux-amd64.tar.gz -C /tmp/etcd-download-test --strip-components=1
rm -f /tmp/etcd-${ETCD_VER}-linux-amd64.tar.gz
/tmp/etcd-download-test/etcd --version
/tmp/etcd-download-test/etcdctl version
/tmp/etcd-download-test/etcdutl version
# start a local etcd server
/tmp/etcd-download-test/etcd
# write,read to etcd
/tmp/etcd-download-test/etcdctl --endpoints=localhost:2379 put foo bar
/tmp/etcd-download-test/etcdctl --endpoints=localhost:2379 get foo
macOS (Darwin)
ETCD_VER=v3.5.21
# choose either URL
GOOGLE_URL=https://storage.googleapis.com/etcd
GITHUB_URL=https://github.com/etcd-io/etcd/releases/download
DOWNLOAD_URL=${GOOGLE_URL}
rm -f /tmp/etcd-${ETCD_VER}-darwin-amd64.zip
rm -rf /tmp/etcd-download-test && mkdir -p /tmp/etcd-download-test
curl -L ${DOWNLOAD_URL}/${ETCD_VER}/etcd-${ETCD_VER}-darwin-amd64.zip -o /tmp/etcd-${ETCD_VER}-darwin-amd64.zip
unzip /tmp/etcd-${ETCD_VER}-darwin-amd64.zip -d /tmp && rm -f /tmp/etcd-${ETCD_VER}-darwin-amd64.zip
mv /tmp/etcd-${ETCD_VER}-darwin-amd64/* /tmp/etcd-download-test && rm -rf mv /tmp/etcd-${ETCD_VER}-darwin-amd64
/tmp/etcd-download-test/etcd --version
/tmp/etcd-download-test/etcdctl version
/tmp/etcd-download-test/etcdutl version
Docker
etcd uses gcr.io/etcd-development/etcd as a primary container registry, and quay.io/coreos/etcd as secondary.
ETCD_VER=v3.5.21
rm -rf /tmp/etcd-data.tmp && mkdir -p /tmp/etcd-data.tmp && \
docker rmi gcr.io/etcd-development/etcd:${ETCD_VER} || true && \
docker run \
-p 2379:2379 \
-p 2380:2380 \
--mount type=bind,source=/tmp/etcd-data.tmp,destination=/etcd-data \
--name etcd-gcr-${ETCD_VER} \
gcr.io/etcd-development/etcd:${ETCD_VER} \
/usr/local/bin/etcd \
--name s1 \
--data-dir /etcd-data \
--listen-client-urls http://0.0.0.0:2379 \
--advertise-client-urls http://0.0.0.0:2379 \
--listen-peer-urls http://0.0.0.0:2380 \
--initial-advertise-peer-urls http://0.0.0.0:2380 \
--initial-cluster s1=http://0.0.0.0:2380 \
--initial-cluster-token tkn \
--initial-cluster-state new \
--log-level info \
--logger zap \
--log-outputs stderr
docker exec etcd-gcr-${ETCD_VER} /usr/local/bin/etcd --version
docker exec etcd-gcr-${ETCD_VER} /usr/local/bin/etcdctl version
docker exec etcd-gcr-${ETCD_VER} /usr/local/bin/etcdutl version
docker exec etcd-gcr-${ETCD_VER} /usr/local/bin/etcdctl endpoint health
docker exec etcd-gcr-${ETCD_VER} /usr/local/bin/etcdctl put foo bar
docker exec etcd-gcr-${ETCD_VER} /usr/local/bin/etcdctl get foo |
| 3.5.18 | 24. januára 2025 | — | 64-bit ZIP Zoznam zmienPlease check out CHANGELOG for a full list of changes. And make sure to read upgrade guide before upgrading etcd (there may be breaking changes).
For installation guides, please check out play.etcd.io and operating etcd. Latest support status for common architectures and operating systems can be found at supported platforms.
Linux
ETCD_VER=v3.5.18
# choose either URL
GOOGLE_URL=https://storage.googleapis.com/etcd
GITHUB_URL=https://github.com/etcd-io/etcd/releases/download
DOWNLOAD_URL=${GOOGLE_URL}
rm -f /tmp/etcd-${ETCD_VER}-linux-amd64.tar.gz
rm -rf /tmp/etcd-download-test && mkdir -p /tmp/etcd-download-test
curl -L ${DOWNLOAD_URL}/${ETCD_VER}/etcd-${ETCD_VER}-linux-amd64.tar.gz -o /tmp/etcd-${ETCD_VER}-linux-amd64.tar.gz
tar xzvf /tmp/etcd-${ETCD_VER}-linux-amd64.tar.gz -C /tmp/etcd-download-test --strip-components=1
rm -f /tmp/etcd-${ETCD_VER}-linux-amd64.tar.gz
/tmp/etcd-download-test/etcd --version
/tmp/etcd-download-test/etcdctl version
/tmp/etcd-download-test/etcdutl version
# start a local etcd server
/tmp/etcd-download-test/etcd
# write,read to etcd
/tmp/etcd-download-test/etcdctl --endpoints=localhost:2379 put foo bar
/tmp/etcd-download-test/etcdctl --endpoints=localhost:2379 get foo
macOS (Darwin)
ETCD_VER=v3.5.18
# choose either URL
GOOGLE_URL=https://storage.googleapis.com/etcd
GITHUB_URL=https://github.com/etcd-io/etcd/releases/download
DOWNLOAD_URL=${GOOGLE_URL}
rm -f /tmp/etcd-${ETCD_VER}-darwin-amd64.zip
rm -rf /tmp/etcd-download-test && mkdir -p /tmp/etcd-download-test
curl -L ${DOWNLOAD_URL}/${ETCD_VER}/etcd-${ETCD_VER}-darwin-amd64.zip -o /tmp/etcd-${ETCD_VER}-darwin-amd64.zip
unzip /tmp/etcd-${ETCD_VER}-darwin-amd64.zip -d /tmp && rm -f /tmp/etcd-${ETCD_VER}-darwin-amd64.zip
mv /tmp/etcd-${ETCD_VER}-darwin-amd64/* /tmp/etcd-download-test && rm -rf mv /tmp/etcd-${ETCD_VER}-darwin-amd64
/tmp/etcd-download-test/etcd --version
/tmp/etcd-download-test/etcdctl version
/tmp/etcd-download-test/etcdutl version
Docker
etcd uses gcr.io/etcd-development/etcd as a primary container registry, and quay.io/coreos/etcd as secondary.
ETCD_VER=v3.5.18
rm -rf /tmp/etcd-data.tmp && mkdir -p /tmp/etcd-data.tmp && \
docker rmi gcr.io/etcd-development/etcd:${ETCD_VER} || true && \
docker run \
-p 2379:2379 \
-p 2380:2380 \
--mount type=bind,source=/tmp/etcd-data.tmp,destination=/etcd-data \
--name etcd-gcr-${ETCD_VER} \
gcr.io/etcd-development/etcd:${ETCD_VER} \
/usr/local/bin/etcd \
--name s1 \
--data-dir /etcd-data \
--listen-client-urls http://0.0.0.0:2379 \
--advertise-client-urls http://0.0.0.0:2379 \
--listen-peer-urls http://0.0.0.0:2380 \
--initial-advertise-peer-urls http://0.0.0.0:2380 \
--initial-cluster s1=http://0.0.0.0:2380 \
--initial-cluster-token tkn \
--initial-cluster-state new \
--log-level info \
--logger zap \
--log-outputs stderr
docker exec etcd-gcr-${ETCD_VER} /usr/local/bin/etcd --version
docker exec etcd-gcr-${ETCD_VER} /usr/local/bin/etcdctl version
docker exec etcd-gcr-${ETCD_VER} /usr/local/bin/etcdutl version
docker exec etcd-gcr-${ETCD_VER} /usr/local/bin/etcdctl endpoint health
docker exec etcd-gcr-${ETCD_VER} /usr/local/bin/etcdctl put foo bar
docker exec etcd-gcr-${ETCD_VER} /usr/local/bin/etcdctl get foo |
| 3.5.9 | 11. júna 2023 | — | 64-bit ZIP |
| 3.4.31 | 20. marca 2024 | — | 64-bit ZIP |
