مشهور: معلومات په AP ۱۴۰۵ لړم ۵ تازه شول

کټګورۍ

انټرنېټ۱٬۳۵۶
اړیکې۳۲۱
غږ او ویډیو۸۹۸
ګرافیک او ډیزاین۵۳۹
دفتري او تولیدي۱٬۱۲۴
د پراختیا وسایل۳٬۱۳۴
د AI وسایل۵۲۹
امنیت او محرمیت۳۸۵
د سیستم وسایل۳٬۱۱۴
لوبې۵۲۳
زده کړه او ساینس۲۳۹
شبکه او IT۲۸۴

د etcd زړې نسخې ډاونلوډ

Distributed reliable key-value store for the most critical data of a distributed system

etcd-io د پروګرام ژبې او SDK #24 د پروګرام ژبې او SDK

دلته د etcd ۲۲ نسخې لېست شوې، له AP ۱۴۰۳ وری ۱ څخه تر اوسنۍ 3.7.3 پورې. هره نسخه د خپرونکي خپلو نصب فایلونو ته لینک لري.

2023: 1 1 23 2024: 1 1 24 2025: 10 10 25 2026: 10 10 26

۲۲ نسخې په ۳ کلونو کې · په کال کې شاوخوا ۶٫۵

نسخهنېټهاندازهفایلونه
3.7.3وروستۍ AP ۱۴۰۵ تله ۳۰ — 64-bit ZIP
د خپرونې یادښتونه
Please check out [CHANGELOG](https://github.com/etcd-io/etcd/blob/main/CHANGELOG/CHANGELOG-3.7.md) for a full list of changes. And make sure to read [upgrade guide](https://etcd.io/docs/v3.7/upgrades/upgrade_3_7/) before upgrading etcd (there may be breaking changes).

For installation guides, please check out [play.etcd.io](http://play.etcd.io) and [operating etcd](https://etcd.io/docs/v3.7/op-guide/). Latest support status for common architectures and operating systems can be found at [supported platforms](https://etcd.io/docs/v3.7/op-guide/supported-platform/).

###### Linux

```sh
ETCD_VER=v3.7.3

# choose either URL
GOOGLE_URL=https://storage.googleapis.com/etcd
GITHUB_URL=https://github.com/etcd-io/etcd/releases/download
DOWNLOAD_URL=${GOOGLE_URL}

rm -f /tmp/etcd-${ETCD_VER}-linux-amd64.tar.gz
rm -rf /tmp/etcd-download-test && mkdir -p /tmp/etcd-download-test

curl -L ${DOWNLOAD_URL}/${ETCD_VER}/etcd-${ETCD_VER}-linux-amd64.tar.gz -o /tmp/etcd-${ETCD_VER}-linux-amd64.tar.gz
tar xzvf /tmp/etcd-${ETCD_VER}-linux-amd64.tar.gz -C /tmp/etcd-download-test --strip-components=1 --no-same-owner
rm -f /tmp/etcd-${ETCD_VER}-linux-amd64.tar.gz

/tmp/etcd-download-test/etcd --version
/tmp/etcd-download-test/etcdctl version
/tmp/etcd-download-test/etcdutl version

# start a local etcd server
/tmp/etcd-download-test/etcd

# write,read to etcd
/tmp/etcd-download-test/etcdctl --endpoints=localhost:2379 put foo bar
/tmp/etcd-download-test/etcdctl --endpoints=localhost:2379 get foo
```

###### macOS (Darwin)

```sh
ETCD_VER=v3.7.3

# choose either URL
GOOGLE_URL=https://storage.googleapis.com/etcd
GITHUB_URL=https://github.com/etcd-io/etcd/releases/download
DOWNLOAD_URL=${GOOGLE_URL}

rm -f /tmp/etcd-${ETCD_VER}-darwin-amd64.zip
rm -rf /tmp/etcd-download-test && mkdir -p /tmp/etcd-download-test

curl -L ${DOWNLOAD_URL}/${ETCD_VER}/etcd-${ETCD_VER}-darwin-amd64.zip -o /tmp/etcd-${ETCD_VER}-darwin-amd64.zip
unzip /tmp/etcd-${ETCD_VER}-darwin-amd64.zip -d /tmp && rm -f /tmp/etcd-${ETCD_VER}-darwin-amd64.zip
mv /tmp/etcd-${ETCD_VER}-darwin-amd64/* /tmp/etcd-download-test && rm -rf mv /tmp/etcd-${ETCD_VER}-darwin-amd64

/tmp/etcd-download-test/etcd --version
/tmp/etcd-download-test/etcdctl version
/tmp/etcd-download-test/etcdutl version
```

###### Docker

etcd uses [`gcr.io/etcd-development/etcd`](https://gcr.io/etcd-development/etcd) as a primary container registry, and [`quay.io/coreos/etcd`](https://quay.io/coreos/etcd) as secondary.

```sh
ETCD_VER=v3.7.3

rm -rf /tmp/etcd-data.tmp && mkdir -p /tmp/etcd-data.tmp && \
docker rmi gcr.io/etcd-development/etcd:${ETCD_VER} || true && \
docker run \
-p 2379:2379 \
-p 2380:2380 \
--mount type=bind,source=/tmp/etcd-data.tmp,destination=/etcd-data \
--name etcd-gcr-${ETCD_VER} \
gcr.io/etcd-development/etcd:${ETCD_VER} \
/usr/local/bin/etcd \
--name s1 \
--data-dir /etcd-data \
--listen-client-urls http://0.0.0.0:2379 \
--advertise-client-urls http://0.0.0.0:2379 \
--listen-peer-urls http://0.0.0.0:2380 \
--initial-advertise-peer-urls http://0.0.0.0:2380 \
--initial-cluster s1=http://0.0.0.0:2380 \
--initial-cluster-token tkn \
--initial-cluster-state new \
--log-level info \
--logger zap \
--log-outputs stderr

docker exec etcd-gcr-${ETCD_VER} /usr/local/bin/etcd --version
docker exec etcd-gcr-${ETCD_VER} /usr/local/bin/etcdctl version
docker exec etcd-gcr-${ETCD_VER} /usr/local/bin/etcdutl version
docker exec etcd-gcr-${ETCD_VER} /usr/local/bin/etcdctl endpoint health
docker exec etcd-gcr-${ETCD_VER} /usr/local/bin/etcdctl put foo bar
docker exec etcd-gcr-${ETCD_VER} /usr/local/bin/etcdctl get foo
```
3.7.2 AP ۱۴۰۵ وږی ۳۱ — 64-bit ZIP
د خپرونې یادښتونه
Please check out [CHANGELOG](https://github.com/etcd-io/etcd/blob/main/CHANGELOG/CHANGELOG-3.7.md) for a full list of changes. And make sure to read [upgrade guide](https://etcd.io/docs/v3.7/upgrades/upgrade_3_7/) before upgrading etcd (there may be breaking changes).

For installation guides, please check out [play.etcd.io](http://play.etcd.io) and [operating etcd](https://etcd.io/docs/v3.7/op-guide/). Latest support status for common architectures and operating systems can be found at [supported platforms](https://etcd.io/docs/v3.7/op-guide/supported-platform/).

###### Linux

```sh
ETCD_VER=v3.7.2

# choose either URL
GOOGLE_URL=https://storage.googleapis.com/etcd
GITHUB_URL=https://github.com/etcd-io/etcd/releases/download
DOWNLOAD_URL=${GOOGLE_URL}

rm -f /tmp/etcd-${ETCD_VER}-linux-amd64.tar.gz
rm -rf /tmp/etcd-download-test && mkdir -p /tmp/etcd-download-test

curl -L ${DOWNLOAD_URL}/${ETCD_VER}/etcd-${ETCD_VER}-linux-amd64.tar.gz -o /tmp/etcd-${ETCD_VER}-linux-amd64.tar.gz
tar xzvf /tmp/etcd-${ETCD_VER}-linux-amd64.tar.gz -C /tmp/etcd-download-test --strip-components=1 --no-same-owner
rm -f /tmp/etcd-${ETCD_VER}-linux-amd64.tar.gz

/tmp/etcd-download-test/etcd --version
/tmp/etcd-download-test/etcdctl version
/tmp/etcd-download-test/etcdutl version

# start a local etcd server
/tmp/etcd-download-test/etcd

# write,read to etcd
/tmp/etcd-download-test/etcdctl --endpoints=localhost:2379 put foo bar
/tmp/etcd-download-test/etcdctl --endpoints=localhost:2379 get foo
```

###### macOS (Darwin)

```sh
ETCD_VER=v3.7.2

# choose either URL
GOOGLE_URL=https://storage.googleapis.com/etcd
GITHUB_URL=https://github.com/etcd-io/etcd/releases/download
DOWNLOAD_URL=${GOOGLE_URL}

rm -f /tmp/etcd-${ETCD_VER}-darwin-amd64.zip
rm -rf /tmp/etcd-download-test && mkdir -p /tmp/etcd-download-test

curl -L ${DOWNLOAD_URL}/${ETCD_VER}/etcd-${ETCD_VER}-darwin-amd64.zip -o /tmp/etcd-${ETCD_VER}-darwin-amd64.zip
unzip /tmp/etcd-${ETCD_VER}-darwin-amd64.zip -d /tmp && rm -f /tmp/etcd-${ETCD_VER}-darwin-amd64.zip
mv /tmp/etcd-${ETCD_VER}-darwin-amd64/* /tmp/etcd-download-test && rm -rf mv /tmp/etcd-${ETCD_VER}-darwin-amd64

/tmp/etcd-download-test/etcd --version
/tmp/etcd-download-test/etcdctl version
/tmp/etcd-download-test/etcdutl version
```

###### Docker

etcd uses [`gcr.io/etcd-development/etcd`](https://gcr.io/etcd-development/etcd) as a primary container registry, and [`quay.io/coreos/etcd`](https://quay.io/coreos/etcd) as secondary.

```sh
ETCD_VER=v3.7.2

rm -rf /tmp/etcd-data.tmp && mkdir -p /tmp/etcd-data.tmp && \
docker rmi gcr.io/etcd-development/etcd:${ETCD_VER} || true && \
docker run \
-p 2379:2379 \
-p 2380:2380 \
--mount type=bind,source=/tmp/etcd-data.tmp,destination=/etcd-data \
--name etcd-gcr-${ETCD_VER} \
gcr.io/etcd-development/etcd:${ETCD_VER} \
/usr/local/bin/etcd \
--name s1 \
--data-dir /etcd-data \
--listen-client-urls http://0.0.0.0:2379 \
--advertise-client-urls http://0.0.0.0:2379 \
--listen-peer-urls http://0.0.0.0:2380 \
--initial-advertise-peer-urls http://0.0.0.0:2380 \
--initial-cluster s1=http://0.0.0.0:2380 \
--initial-cluster-token tkn \
--initial-cluster-state new \
--log-level info \
--logger zap \
--log-outputs stderr

docker exec etcd-gcr-${ETCD_VER} /usr/local/bin/etcd --version
docker exec etcd-gcr-${ETCD_VER} /usr/local/bin/etcdctl version
docker exec etcd-gcr-${ETCD_VER} /usr/local/bin/etcdutl version
docker exec etcd-gcr-${ETCD_VER} /usr/local/bin/etcdctl endpoint health
docker exec etcd-gcr-${ETCD_VER} /usr/local/bin/etcdctl put foo bar
docker exec etcd-gcr-${ETCD_VER} /usr/local/bin/etcdctl get foo
```
3.7.1 AP ۱۴۰۵ زمری ۱ — 64-bit ZIP
د خپرونې یادښتونه
Please check out [CHANGELOG](https://github.com/etcd-io/etcd/blob/main/CHANGELOG/CHANGELOG-3.7.md) for a full list of changes. And make sure to read [upgrade guide](https://etcd.io/docs/v3.7/upgrades/upgrade_3_7/) before upgrading etcd (there may be breaking changes).

For installation guides, please check out [operating etcd](https://etcd.io/docs/v3.7/op-guide/). Latest support status for common architectures and operating systems can be found at [supported platforms](https://etcd.io/docs/v3.7/op-guide/supported-platform/).

###### Linux

```sh
ETCD_VER=v3.7.1

# choose either URL
GOOGLE_URL=https://storage.googleapis.com/etcd
GITHUB_URL=https://github.com/etcd-io/etcd/releases/download
DOWNLOAD_URL=${GOOGLE_URL}

rm -f /tmp/etcd-${ETCD_VER}-linux-amd64.tar.gz
rm -rf /tmp/etcd-download-test && mkdir -p /tmp/etcd-download-test

curl -L ${DOWNLOAD_URL}/${ETCD_VER}/etcd-${ETCD_VER}-linux-amd64.tar.gz -o /tmp/etcd-${ETCD_VER}-linux-amd64.tar.gz
tar xzvf /tmp/etcd-${ETCD_VER}-linux-amd64.tar.gz -C /tmp/etcd-download-test --strip-components=1 --no-same-owner
rm -f /tmp/etcd-${ETCD_VER}-linux-amd64.tar.gz

/tmp/etcd-download-test/etcd --version
/tmp/etcd-download-test/etcdctl version
/tmp/etcd-download-test/etcdutl version

# start a local etcd server
/tmp/etcd-download-test/etcd

# write,read to etcd
/tmp/etcd-download-test/etcdctl --endpoints=localhost:2379 put foo bar
/tmp/etcd-download-test/etcdctl --endpoints=localhost:2379 get foo
```

###### macOS (Darwin)

```sh
ETCD_VER=v3.7.1

# choose either URL
GOOGLE_URL=https://storage.googleapis.com/etcd
GITHUB_URL=https://github.com/etcd-io/etcd/releases/download
DOWNLOAD_URL=${GOOGLE_URL}

rm -f /tmp/etcd-${ETCD_VER}-darwin-amd64.zip
rm -rf /tmp/etcd-download-test && mkdir -p /tmp/etcd-download-test

curl -L ${DOWNLOAD_URL}/${ETCD_VER}/etcd-${ETCD_VER}-darwin-amd64.zip -o /tmp/etcd-${ETCD_VER}-darwin-amd64.zip
unzip /tmp/etcd-${ETCD_VER}-darwin-amd64.zip -d /tmp && rm -f /tmp/etcd-${ETCD_VER}-darwin-amd64.zip
mv /tmp/etcd-${ETCD_VER}-darwin-amd64/* /tmp/etcd-download-test && rm -rf mv /tmp/etcd-${ETCD_VER}-darwin-amd64

/tmp/etcd-download-test/etcd --version
/tmp/etcd-download-test/etcdctl version
/tmp/etcd-download-test/etcdutl version
```

###### Docker

etcd uses [`gcr.io/etcd-development/etcd`](https://gcr.io/etcd-development/etcd) as a primary container registry, and [`quay.io/coreos/etcd`](https://quay.io/coreos/etcd) as secondary.

```sh
ETCD_VER=v3.7.1

rm -rf /tmp/etcd-data.tmp && mkdir -p /tmp/etcd-data.tmp && \
docker rmi gcr.io/etcd-development/etcd:${ETCD_VER} || true && \
docker run \
-p 2379:2379 \
-p 2380:2380 \
--mount type=bind,source=/tmp/etcd-data.tmp,destination=/etcd-data \
--name etcd-gcr-${ETCD_VER} \
gcr.io/etcd-development/etcd:${ETCD_VER} \
/usr/local/bin/etcd \
--name s1 \
--data-dir /etcd-data \
--listen-client-urls http://0.0.0.0:2379 \
--advertise-client-urls http://0.0.0.0:2379 \
--listen-peer-urls http://0.0.0.0:2380 \
--initial-advertise-peer-urls http://0.0.0.0:2380 \
--initial-cluster s1=http://0.0.0.0:2380 \
--initial-cluster-token tkn \
--initial-cluster-state new \
--log-level info \
--logger zap \
--log-outputs stderr

docker exec etcd-gcr-${ETCD_VER} /usr/local/bin/etcd --version
docker exec etcd-gcr-${ETCD_VER} /usr/local/bin/etcdctl version
docker exec etcd-gcr-${ETCD_VER} /usr/local/bin/etcdutl version
docker exec etcd-gcr-${ETCD_VER} /usr/local/bin/etcdctl endpoint health
docker exec etcd-gcr-${ETCD_VER} /usr/local/bin/etcdctl put foo bar
docker exec etcd-gcr-${ETCD_VER} /usr/local/bin/etcdctl get foo
```
3.7.0 AP ۱۴۰۵ چنگاښ ۱۷ — 64-bit ZIP
د خپرونې یادښتونه
Please check out [CHANGELOG](https://github.com/etcd-io/etcd/blob/main/CHANGELOG/CHANGELOG-3.7.md) for a full list of changes. And make sure to read [upgrade guide](https://etcd.io/docs/v3.7/upgrades/upgrade_3_7/) before upgrading etcd (there may be breaking changes).

For installation guides, please check out [operating etcd](https://etcd.io/docs/v3.7/op-guide/). Latest support status for common architectures and operating systems can be found at [supported platforms](https://etcd.io/docs/v3.7/op-guide/supported-platform/).

###### Linux

```sh
ETCD_VER=v3.7.0

# choose either URL
GOOGLE_URL=https://storage.googleapis.com/etcd
GITHUB_URL=https://github.com/etcd-io/etcd/releases/download
DOWNLOAD_URL=${GOOGLE_URL}

rm -f /tmp/etcd-${ETCD_VER}-linux-amd64.tar.gz
rm -rf /tmp/etcd-download-test && mkdir -p /tmp/etcd-download-test

curl -L ${DOWNLOAD_URL}/${ETCD_VER}/etcd-${ETCD_VER}-linux-amd64.tar.gz -o /tmp/etcd-${ETCD_VER}-linux-amd64.tar.gz
tar xzvf /tmp/etcd-${ETCD_VER}-linux-amd64.tar.gz -C /tmp/etcd-download-test --strip-components=1 --no-same-owner
rm -f /tmp/etcd-${ETCD_VER}-linux-amd64.tar.gz

/tmp/etcd-download-test/etcd --version
/tmp/etcd-download-test/etcdctl version
/tmp/etcd-download-test/etcdutl version

# start a local etcd server
/tmp/etcd-download-test/etcd

# write,read to etcd
/tmp/etcd-download-test/etcdctl --endpoints=localhost:2379 put foo bar
/tmp/etcd-download-test/etcdctl --endpoints=localhost:2379 get foo
```

###### macOS (Darwin)

```sh
ETCD_VER=v3.7.0

# choose either URL
GOOGLE_URL=https://storage.googleapis.com/etcd
GITHUB_URL=https://github.com/etcd-io/etcd/releases/download
DOWNLOAD_URL=${GOOGLE_URL}

rm -f /tmp/etcd-${ETCD_VER}-darwin-amd64.zip
rm -rf /tmp/etcd-download-test && mkdir -p /tmp/etcd-download-test

curl -L ${DOWNLOAD_URL}/${ETCD_VER}/etcd-${ETCD_VER}-darwin-amd64.zip -o /tmp/etcd-${ETCD_VER}-darwin-amd64.zip
unzip /tmp/etcd-${ETCD_VER}-darwin-amd64.zip -d /tmp && rm -f /tmp/etcd-${ETCD_VER}-darwin-amd64.zip
mv /tmp/etcd-${ETCD_VER}-darwin-amd64/* /tmp/etcd-download-test && rm -rf mv /tmp/etcd-${ETCD_VER}-darwin-amd64

/tmp/etcd-download-test/etcd --version
/tmp/etcd-download-test/etcdctl version
/tmp/etcd-download-test/etcdutl version
```

###### Docker

etcd uses [`gcr.io/etcd-development/etcd`](https://gcr.io/etcd-development/etcd) as a primary container registry, and [`quay.io/coreos/etcd`](https://quay.io/coreos/etcd) as secondary.

```sh
ETCD_VER=v3.7.0

rm -rf /tmp/etcd-data.tmp && mkdir -p /tmp/etcd-data.tmp && \
docker rmi gcr.io/etcd-development/etcd:${ETCD_VER} || true && \
docker run \
-p 2379:2379 \
-p 2380:2380 \
--mount type=bind,source=/tmp/etcd-data.tmp,destination=/etcd-data \
--name etcd-gcr-${ETCD_VER} \
gcr.io/etcd-development/etcd:${ETCD_VER} \
/usr/local/bin/etcd \
--name s1 \
--data-dir /etcd-data \
--listen-client-urls http://0.0.0.0:2379 \
--advertise-client-urls http://0.0.0.0:2379 \
--listen-peer-urls http://0.0.0.0:2380 \
--initial-advertise-peer-urls http://0.0.0.0:2380 \
--initial-cluster s1=http://0.0.0.0:2380 \
--initial-cluster-token tkn \
--initial-cluster-state new \
--log-level info \
--logger zap \
--log-outputs stderr

docker exec etcd-gcr-${ETCD_VER} /usr/local/bin/etcd --version
docker exec etcd-gcr-${ETCD_VER} /usr/local/bin/etcdctl version
docker exec etcd-gcr-${ETCD_VER} /usr/local/bin/etcdutl version
docker exec etcd-gcr-${ETCD_VER} /usr/local/bin/etcdctl endpoint health
docker exec etcd-gcr-${ETCD_VER} /usr/local/bin/etcdctl put foo bar
docker exec etcd-gcr-${ETCD_VER} /usr/local/bin/etcdctl get foo
```
3.6.13 AP ۱۴۰۵ چنگاښ ۱۰ — 64-bit ZIP
د خپرونې یادښتونه
Please check out [CHANGELOG](https://github.com/etcd-io/etcd/blob/main/CHANGELOG/CHANGELOG-3.6.md) for a full list of changes. And make sure to read [upgrade guide](https://etcd.io/docs/v3.6/upgrades/upgrade_3_6/) before upgrading etcd (there may be breaking changes).

For installation guides, please check out [play.etcd.io](http://play.etcd.io) and [operating etcd](https://etcd.io/docs/v3.6/op-guide/). Latest support status for common architectures and operating systems can be found at [supported platforms](https://etcd.io/docs/v3.6/op-guide/supported-platform/).

###### Linux

```sh
ETCD_VER=v3.6.13

# choose either URL
GOOGLE_URL=https://storage.googleapis.com/etcd
GITHUB_URL=https://github.com/etcd-io/etcd/releases/download
DOWNLOAD_URL=${GOOGLE_URL}

rm -f /tmp/etcd-${ETCD_VER}-linux-amd64.tar.gz
rm -rf /tmp/etcd-download-test && mkdir -p /tmp/etcd-download-test

curl -L ${DOWNLOAD_URL}/${ETCD_VER}/etcd-${ETCD_VER}-linux-amd64.tar.gz -o /tmp/etcd-${ETCD_VER}-linux-amd64.tar.gz
tar xzvf /tmp/etcd-${ETCD_VER}-linux-amd64.tar.gz -C /tmp/etcd-download-test --strip-components=1 --no-same-owner
rm -f /tmp/etcd-${ETCD_VER}-linux-amd64.tar.gz

/tmp/etcd-download-test/etcd --version
/tmp/etcd-download-test/etcdctl version
/tmp/etcd-download-test/etcdutl version

# start a local etcd server
/tmp/etcd-download-test/etcd

# write,read to etcd
/tmp/etcd-download-test/etcdctl --endpoints=localhost:2379 put foo bar
/tmp/etcd-download-test/etcdctl --endpoints=localhost:2379 get foo
```

###### macOS (Darwin)

```sh
ETCD_VER=v3.6.13

# choose either URL
GOOGLE_URL=https://storage.googleapis.com/etcd
GITHUB_URL=https://github.com/etcd-io/etcd/releases/download
DOWNLOAD_URL=${GOOGLE_URL}

rm -f /tmp/etcd-${ETCD_VER}-darwin-amd64.zip
rm -rf /tmp/etcd-download-test && mkdir -p /tmp/etcd-download-test

curl -L ${DOWNLOAD_URL}/${ETCD_VER}/etcd-${ETCD_VER}-darwin-amd64.zip -o /tmp/etcd-${ETCD_VER}-darwin-amd64.zip
unzip /tmp/etcd-${ETCD_VER}-darwin-amd64.zip -d /tmp && rm -f /tmp/etcd-${ETCD_VER}-darwin-amd64.zip
mv /tmp/etcd-${ETCD_VER}-darwin-amd64/* /tmp/etcd-download-test && rm -rf mv /tmp/etcd-${ETCD_VER}-darwin-amd64

/tmp/etcd-download-test/etcd --version
/tmp/etcd-download-test/etcdctl version
/tmp/etcd-download-test/etcdutl version
```

###### Docker

etcd uses [`gcr.io/etcd-development/etcd`](https://gcr.io/etcd-development/etcd) as a primary container registry, and [`quay.io/coreos/etcd`](https://quay.io/coreos/etcd) as secondary.

```sh
ETCD_VER=v3.6.13

rm -rf /tmp/etcd-data.tmp && mkdir -p /tmp/etcd-data.tmp && \
docker rmi gcr.io/etcd-development/etcd:${ETCD_VER} || true && \
docker run \
-p 2379:2379 \
-p 2380:2380 \
--mount type=bind,source=/tmp/etcd-data.tmp,destination=/etcd-data \
--name etcd-gcr-${ETCD_VER} \
gcr.io/etcd-development/etcd:${ETCD_VER} \
/usr/local/bin/etcd \
--name s1 \
--data-dir /etcd-data \
--listen-client-urls http://0.0.0.0:2379 \
--advertise-client-urls http://0.0.0.0:2379 \
--listen-peer-urls http://0.0.0.0:2380 \
--initial-advertise-peer-urls http://0.0.0.0:2380 \
--initial-cluster s1=http://0.0.0.0:2380 \
--initial-cluster-token tkn \
--initial-cluster-state new \
--log-level info \
--logger zap \
--log-outputs stderr

docker exec etcd-gcr-${ETCD_VER} /usr/local/bin/etcd --version
docker exec etcd-gcr-${ETCD_VER} /usr/local/bin/etcdctl version
docker exec etcd-gcr-${ETCD_VER} /usr/local/bin/etcdutl version
docker exec etcd-gcr-${ETCD_VER} /usr/local/bin/etcdctl endpoint health
docker exec etcd-gcr-${ETCD_VER} /usr/local/bin/etcdctl put foo bar
docker exec etcd-gcr-${ETCD_VER} /usr/local/bin/etcdctl get foo
```
3.6.12 AP ۱۴۰۵ غبرگولی ۱۱ — 64-bit ZIP
د خپرونې یادښتونه
Please check out [CHANGELOG](https://github.com/etcd-io/etcd/blob/main/CHANGELOG/CHANGELOG-3.6.md) for a full list of changes. And make sure to read [upgrade guide](https://etcd.io/docs/v3.6/upgrades/upgrade_3_6/) before upgrading etcd (there may be breaking changes).

For installation guides, please check out [operating etcd](https://etcd.io/docs/v3.6/op-guide/). Latest support status for common architectures and operating systems can be found at [supported platforms](https://etcd.io/docs/v3.6/op-guide/supported-platform/).

###### Linux

```sh
ETCD_VER=v3.6.12

# choose either URL
GOOGLE_URL=https://storage.googleapis.com/etcd
GITHUB_URL=https://github.com/etcd-io/etcd/releases/download
DOWNLOAD_URL=${GOOGLE_URL}

rm -f /tmp/etcd-${ETCD_VER}-linux-amd64.tar.gz
rm -rf /tmp/etcd-download-test && mkdir -p /tmp/etcd-download-test

curl -L ${DOWNLOAD_URL}/${ETCD_VER}/etcd-${ETCD_VER}-linux-amd64.tar.gz -o /tmp/etcd-${ETCD_VER}-linux-amd64.tar.gz
tar xzvf /tmp/etcd-${ETCD_VER}-linux-amd64.tar.gz -C /tmp/etcd-download-test --strip-components=1 --no-same-owner
rm -f /tmp/etcd-${ETCD_VER}-linux-amd64.tar.gz

/tmp/etcd-download-test/etcd --version
/tmp/etcd-download-test/etcdctl version
/tmp/etcd-download-test/etcdutl version

# start a local etcd server
/tmp/etcd-download-test/etcd

# write,read to etcd
/tmp/etcd-download-test/etcdctl --endpoints=localhost:2379 put foo bar
/tmp/etcd-download-test/etcdctl --endpoints=localhost:2379 get foo
```

###### macOS (Darwin)

```sh
ETCD_VER=v3.6.12

# choose either URL
GOOGLE_URL=https://storage.googleapis.com/etcd
GITHUB_URL=https://github.com/etcd-io/etcd/releases/download
DOWNLOAD_URL=${GOOGLE_URL}

rm -f /tmp/etcd-${ETCD_VER}-darwin-amd64.zip
rm -rf /tmp/etcd-download-test && mkdir -p /tmp/etcd-download-test

curl -L ${DOWNLOAD_URL}/${ETCD_VER}/etcd-${ETCD_VER}-darwin-amd64.zip -o /tmp/etcd-${ETCD_VER}-darwin-amd64.zip
unzip /tmp/etcd-${ETCD_VER}-darwin-amd64.zip -d /tmp && rm -f /tmp/etcd-${ETCD_VER}-darwin-amd64.zip
mv /tmp/etcd-${ETCD_VER}-darwin-amd64/* /tmp/etcd-download-test && rm -rf mv /tmp/etcd-${ETCD_VER}-darwin-amd64

/tmp/etcd-download-test/etcd --version
/tmp/etcd-download-test/etcdctl version
/tmp/etcd-download-test/etcdutl version
```

###### Docker

etcd uses [`gcr.io/etcd-development/etcd`](https://gcr.io/etcd-development/etcd) as a primary container registry, and [`quay.io/coreos/etcd`](https://quay.io/coreos/etcd) as secondary.

```sh
ETCD_VER=v3.6.12

rm -rf /tmp/etcd-data.tmp && mkdir -p /tmp/etcd-data.tmp && \
docker rmi gcr.io/etcd-development/etcd:${ETCD_VER} || true && \
docker run \
-p 2379:2379 \
-p 2380:2380 \
--mount type=bind,source=/tmp/etcd-data.tmp,destination=/etcd-data \
--name etcd-gcr-${ETCD_VER} \
gcr.io/etcd-development/etcd:${ETCD_VER} \
/usr/local/bin/etcd \
--name s1 \
--data-dir /etcd-data \
--listen-client-urls http://0.0.0.0:2379 \
--advertise-client-urls http://0.0.0.0:2379 \
--listen-peer-urls http://0.0.0.0:2380 \
--initial-advertise-peer-urls http://0.0.0.0:2380 \
--initial-cluster s1=http://0.0.0.0:2380 \
--initial-cluster-token tkn \
--initial-cluster-state new \
--log-level info \
--logger zap \
--log-outputs stderr

docker exec etcd-gcr-${ETCD_VER} /usr/local/bin/etcd --version
docker exec etcd-gcr-${ETCD_VER} /usr/local/bin/etcdctl version
docker exec etcd-gcr-${ETCD_VER} /usr/local/bin/etcdutl version
docker exec etcd-gcr-${ETCD_VER} /usr/local/bin/etcdctl endpoint health
docker exec etcd-gcr-${ETCD_VER} /usr/local/bin/etcdctl put foo bar
docker exec etcd-gcr-${ETCD_VER} /usr/local/bin/etcdctl get foo
```
3.6.11 AP ۱۴۰۵ غویی ۱۱ — 64-bit ZIP
د خپرونې یادښتونه
Please check out [CHANGELOG](https://github.com/etcd-io/etcd/blob/main/CHANGELOG/CHANGELOG-3.6.md) for a full list of changes. And make sure to read [upgrade guide](https://etcd.io/docs/v3.6/upgrades/upgrade_3_6/) before upgrading etcd (there may be breaking changes).

For installation guides, please check out [play.etcd.io](http://play.etcd.io) and [operating etcd](https://etcd.io/docs/v3.6/op-guide/). Latest support status for common architectures and operating systems can be found at [supported platforms](https://etcd.io/docs/v3.6/op-guide/supported-platform/).

###### Linux

```sh
ETCD_VER=v3.6.11

# choose either URL
GOOGLE_URL=https://storage.googleapis.com/etcd
GITHUB_URL=https://github.com/etcd-io/etcd/releases/download
DOWNLOAD_URL=${GOOGLE_URL}

rm -f /tmp/etcd-${ETCD_VER}-linux-amd64.tar.gz
rm -rf /tmp/etcd-download-test && mkdir -p /tmp/etcd-download-test

curl -L ${DOWNLOAD_URL}/${ETCD_VER}/etcd-${ETCD_VER}-linux-amd64.tar.gz -o /tmp/etcd-${ETCD_VER}-linux-amd64.tar.gz
tar xzvf /tmp/etcd-${ETCD_VER}-linux-amd64.tar.gz -C /tmp/etcd-download-test --strip-components=1 --no-same-owner
rm -f /tmp/etcd-${ETCD_VER}-linux-amd64.tar.gz

/tmp/etcd-download-test/etcd --version
/tmp/etcd-download-test/etcdctl version
/tmp/etcd-download-test/etcdutl version

# start a local etcd server
/tmp/etcd-download-test/etcd

# write,read to etcd
/tmp/etcd-download-test/etcdctl --endpoints=localhost:2379 put foo bar
/tmp/etcd-download-test/etcdctl --endpoints=localhost:2379 get foo
```

###### macOS (Darwin)

```sh
ETCD_VER=v3.6.11

# choose either URL
GOOGLE_URL=https://storage.googleapis.com/etcd
GITHUB_URL=https://github.com/etcd-io/etcd/releases/download
DOWNLOAD_URL=${GOOGLE_URL}

rm -f /tmp/etcd-${ETCD_VER}-darwin-amd64.zip
rm -rf /tmp/etcd-download-test && mkdir -p /tmp/etcd-download-test

curl -L ${DOWNLOAD_URL}/${ETCD_VER}/etcd-${ETCD_VER}-darwin-amd64.zip -o /tmp/etcd-${ETCD_VER}-darwin-amd64.zip
unzip /tmp/etcd-${ETCD_VER}-darwin-amd64.zip -d /tmp && rm -f /tmp/etcd-${ETCD_VER}-darwin-amd64.zip
mv /tmp/etcd-${ETCD_VER}-darwin-amd64/* /tmp/etcd-download-test && rm -rf mv /tmp/etcd-${ETCD_VER}-darwin-amd64

/tmp/etcd-download-test/etcd --version
/tmp/etcd-download-test/etcdctl version
/tmp/etcd-download-test/etcdutl version
```

###### Docker

etcd uses [`gcr.io/etcd-development/etcd`](https://gcr.io/etcd-development/etcd) as a primary container registry, and [`quay.io/coreos/etcd`](https://quay.io/coreos/etcd) as secondary.

```sh
ETCD_VER=v3.6.11

rm -rf /tmp/etcd-data.tmp && mkdir -p /tmp/etcd-data.tmp && \
docker rmi gcr.io/etcd-development/etcd:${ETCD_VER} || true && \
docker run \
-p 2379:2379 \
-p 2380:2380 \
--mount type=bind,source=/tmp/etcd-data.tmp,destination=/etcd-data \
--name etcd-gcr-${ETCD_VER} \
gcr.io/etcd-development/etcd:${ETCD_VER} \
/usr/local/bin/etcd \
--name s1 \
--data-dir /etcd-data \
--listen-client-urls http://0.0.0.0:2379 \
--advertise-client-urls http://0.0.0.0:2379 \
--listen-peer-urls http://0.0.0.0:2380 \
--initial-advertise-peer-urls http://0.0.0.0:2380 \
--initial-cluster s1=http://0.0.0.0:2380 \
--initial-cluster-token tkn \
--initial-cluster-state new \
--log-level info \
--logger zap \
--log-outputs stderr

docker exec etcd-gcr-${ETCD_VER} /usr/local/bin/etcd --version
docker exec etcd-gcr-${ETCD_VER} /usr/local/bin/etcdctl version
docker exec etcd-gcr-${ETCD_VER} /usr/local/bin/etcdutl version
docker exec etcd-gcr-${ETCD_VER} /usr/local/bin/etcdctl endpoint health
docker exec etcd-gcr-${ETCD_VER} /usr/local/bin/etcdctl put foo bar
docker exec etcd-gcr-${ETCD_VER} /usr/local/bin/etcdctl get foo
```
3.6.10 AP ۱۴۰۵ وری ۱۲ — 64-bit ZIP
د خپرونې یادښتونه
Please check out CHANGELOG for a full list of changes. And make sure to read upgrade guide before upgrading etcd (there may be breaking changes).
For installation guides, please check out play.etcd.io and operating etcd. Latest support status for common architectures and operating systems can be found at supported platforms.
Linux
ETCD_VER=v3.6.10
# choose either URL
GOOGLE_URL=https://storage.googleapis.com/etcd
GITHUB_URL=https://github.com/etcd-io/etcd/releases/download
DOWNLOAD_URL=${GOOGLE_URL}
rm -f /tmp/etcd-${ETCD_VER}-linux-amd64.tar.gz
rm -rf /tmp/etcd-download-test && mkdir -p /tmp/etcd-download-test
curl -L ${DOWNLOAD_URL}/${ETCD_VER}/etcd-${ETCD_VER}-linux-amd64.tar.gz -o /tmp/etcd-${ETCD_VER}-linux-amd64.tar.gz
tar xzvf /tmp/etcd-${ETCD_VER}-linux-amd64.tar.gz -C /tmp/etcd-download-test --strip-components=1 --no-same-owner
rm -f /tmp/etcd-${ETCD_VER}-linux-amd64.tar.gz
/tmp/etcd-download-test/etcd --version
/tmp/etcd-download-test/etcdctl version
/tmp/etcd-download-test/etcdutl version
# start a local etcd server
/tmp/etcd-download-test/etcd
# write,read to etcd
/tmp/etcd-download-test/etcdctl --endpoints=localhost:2379 put foo bar
/tmp/etcd-download-test/etcdctl --endpoints=localhost:2379 get foo
macOS (Darwin)
ETCD_VER=v3.6.10
# choose either URL
GOOGLE_URL=https://storage.googleapis.com/etcd
GITHUB_URL=https://github.com/etcd-io/etcd/releases/download
DOWNLOAD_URL=${GOOGLE_URL}
rm -f /tmp/etcd-${ETCD_VER}-darwin-amd64.zip
rm -rf /tmp/etcd-download-test && mkdir -p /tmp/etcd-download-test
curl -L ${DOWNLOAD_URL}/${ETCD_VER}/etcd-${ETCD_VER}-darwin-amd64.zip -o /tmp/etcd-${ETCD_VER}-darwin-amd64.zip
unzip /tmp/etcd-${ETCD_VER}-darwin-amd64.zip -d /tmp && rm -f /tmp/etcd-${ETCD_VER}-darwin-amd64.zip
mv /tmp/etcd-${ETCD_VER}-darwin-amd64/* /tmp/etcd-download-test && rm -rf mv /tmp/etcd-${ETCD_VER}-darwin-amd64
/tmp/etcd-download-test/etcd --version
/tmp/etcd-download-test/etcdctl version
/tmp/etcd-download-test/etcdutl version
Docker
etcd uses gcr.io/etcd-development/etcd as a primary container registry, and quay.io/coreos/etcd as secondary.
ETCD_VER=v3.6.10
rm -rf /tmp/etcd-data.tmp && mkdir -p /tmp/etcd-data.tmp && \
docker rmi gcr.io/etcd-development/etcd:${ETCD_VER} || true && \
docker run \
-p 2379:2379 \
-p 2380:2380 \
--mount type=bind,source=/tmp/etcd-data.tmp,destination=/etcd-data \
--name etcd-gcr-${ETCD_VER} \
gcr.io/etcd-development/etcd:${ETCD_VER} \
/usr/local/bin/etcd \
--name s1 \
--data-dir /etcd-data \
--listen-client-urls http://0.0.0.0:2379 \
--advertise-client-urls http://0.0.0.0:2379 \
--listen-peer-urls http://0.0.0.0:2380 \
--initial-advertise-peer-urls http://0.0.0.0:2380 \
--initial-cluster s1=http://0.0.0.0:2380 \
--initial-cluster-token tkn \
--initial-cluster-state new \
--log-level info \
--logger zap \
--log-outputs stderr
docker exec etcd-gcr-${ETCD_VER} /usr/local/bin/etcd --version
docker exec etcd-gcr-${ETCD_VER} /usr/local/bin/etcdctl version
docker exec etcd-gcr-${ETCD_VER} /usr/local/bin/etcdutl version
docker exec etcd-gcr-${ETCD_VER} /usr/local/bin/etcdctl endpoint health
docker exec etcd-gcr-${ETCD_VER} /usr/local/bin/etcdctl put foo bar
docker exec etcd-gcr-${ETCD_VER} /usr/local/bin/etcdctl get foo
3.6.9 AP ۱۴۰۴ کب ۲۹ — 64-bit ZIP
د خپرونې یادښتونه
Please check out CHANGELOG for a full list of changes. And make sure to read upgrade guide before upgrading etcd (there may be breaking changes).
For installation guides, please check out play.etcd.io and operating etcd. Latest support status for common architectures and operating systems can be found at supported platforms.
Linux
ETCD_VER=v3.6.9
# choose either URL
GOOGLE_URL=https://storage.googleapis.com/etcd
GITHUB_URL=https://github.com/etcd-io/etcd/releases/download
DOWNLOAD_URL=${GOOGLE_URL}
rm -f /tmp/etcd-${ETCD_VER}-linux-amd64.tar.gz
rm -rf /tmp/etcd-download-test && mkdir -p /tmp/etcd-download-test
curl -L ${DOWNLOAD_URL}/${ETCD_VER}/etcd-${ETCD_VER}-linux-amd64.tar.gz -o /tmp/etcd-${ETCD_VER}-linux-amd64.tar.gz
tar xzvf /tmp/etcd-${ETCD_VER}-linux-amd64.tar.gz -C /tmp/etcd-download-test --strip-components=1 --no-same-owner
rm -f /tmp/etcd-${ETCD_VER}-linux-amd64.tar.gz
/tmp/etcd-download-test/etcd --version
/tmp/etcd-download-test/etcdctl version
/tmp/etcd-download-test/etcdutl version
# start a local etcd server
/tmp/etcd-download-test/etcd
# write,read to etcd
/tmp/etcd-download-test/etcdctl --endpoints=localhost:2379 put foo bar
/tmp/etcd-download-test/etcdctl --endpoints=localhost:2379 get foo
macOS (Darwin)
ETCD_VER=v3.6.9
# choose either URL
GOOGLE_URL=https://storage.googleapis.com/etcd
GITHUB_URL=https://github.com/etcd-io/etcd/releases/download
DOWNLOAD_URL=${GOOGLE_URL}
rm -f /tmp/etcd-${ETCD_VER}-darwin-amd64.zip
rm -rf /tmp/etcd-download-test && mkdir -p /tmp/etcd-download-test
curl -L ${DOWNLOAD_URL}/${ETCD_VER}/etcd-${ETCD_VER}-darwin-amd64.zip -o /tmp/etcd-${ETCD_VER}-darwin-amd64.zip
unzip /tmp/etcd-${ETCD_VER}-darwin-amd64.zip -d /tmp && rm -f /tmp/etcd-${ETCD_VER}-darwin-amd64.zip
mv /tmp/etcd-${ETCD_VER}-darwin-amd64/* /tmp/etcd-download-test && rm -rf mv /tmp/etcd-${ETCD_VER}-darwin-amd64
/tmp/etcd-download-test/etcd --version
/tmp/etcd-download-test/etcdctl version
/tmp/etcd-download-test/etcdutl version
Docker
etcd uses gcr.io/etcd-development/etcd as a primary container registry, and quay.io/coreos/etcd as secondary.
ETCD_VER=v3.6.9
rm -rf /tmp/etcd-data.tmp && mkdir -p /tmp/etcd-data.tmp && \
docker rmi gcr.io/etcd-development/etcd:${ETCD_VER} || true && \
docker run \
-p 2379:2379 \
-p 2380:2380 \
--mount type=bind,source=/tmp/etcd-data.tmp,destination=/etcd-data \
--name etcd-gcr-${ETCD_VER} \
gcr.io/etcd-development/etcd:${ETCD_VER} \
/usr/local/bin/etcd \
--name s1 \
--data-dir /etcd-data \
--listen-client-urls http://0.0.0.0:2379 \
--advertise-client-urls http://0.0.0.0:2379 \
--listen-peer-urls http://0.0.0.0:2380 \
--initial-advertise-peer-urls http://0.0.0.0:2380 \
--initial-cluster s1=http://0.0.0.0:2380 \
--initial-cluster-token tkn \
--initial-cluster-state new \
--log-level info \
--logger zap \
--log-outputs stderr
docker exec etcd-gcr-${ETCD_VER} /usr/local/bin/etcd --version
docker exec etcd-gcr-${ETCD_VER} /usr/local/bin/etcdctl version
docker exec etcd-gcr-${ETCD_VER} /usr/local/bin/etcdutl version
docker exec etcd-gcr-${ETCD_VER} /usr/local/bin/etcdctl endpoint health
docker exec etcd-gcr-${ETCD_VER} /usr/local/bin/etcdctl put foo bar
docker exec etcd-gcr-${ETCD_VER} /usr/local/bin/etcdctl get foo
3.6.8 AP ۱۴۰۴ سلواغه ۲۴ — 64-bit ZIP
د خپرونې یادښتونه
Please check out CHANGELOG for a full list of changes. And make sure to read upgrade guide before upgrading etcd (there may be breaking changes).
For installation guides, please check out play.etcd.io and operating etcd. Latest support status for common architectures and operating systems can be found at supported platforms.
Linux
ETCD_VER=v3.6.8
# choose either URL
GOOGLE_URL=https://storage.googleapis.com/etcd
GITHUB_URL=https://github.com/etcd-io/etcd/releases/download
DOWNLOAD_URL=${GOOGLE_URL}
rm -f /tmp/etcd-${ETCD_VER}-linux-amd64.tar.gz
rm -rf /tmp/etcd-download-test && mkdir -p /tmp/etcd-download-test
curl -L ${DOWNLOAD_URL}/${ETCD_VER}/etcd-${ETCD_VER}-linux-amd64.tar.gz -o /tmp/etcd-${ETCD_VER}-linux-amd64.tar.gz
tar xzvf /tmp/etcd-${ETCD_VER}-linux-amd64.tar.gz -C /tmp/etcd-download-test --strip-components=1 --no-same-owner
rm -f /tmp/etcd-${ETCD_VER}-linux-amd64.tar.gz
/tmp/etcd-download-test/etcd --version
/tmp/etcd-download-test/etcdctl version
/tmp/etcd-download-test/etcdutl version
# start a local etcd server
/tmp/etcd-download-test/etcd
# write,read to etcd
/tmp/etcd-download-test/etcdctl --endpoints=localhost:2379 put foo bar
/tmp/etcd-download-test/etcdctl --endpoints=localhost:2379 get foo
macOS (Darwin)
ETCD_VER=v3.6.8
# choose either URL
GOOGLE_URL=https://storage.googleapis.com/etcd
GITHUB_URL=https://github.com/etcd-io/etcd/releases/download
DOWNLOAD_URL=${GOOGLE_URL}
rm -f /tmp/etcd-${ETCD_VER}-darwin-amd64.zip
rm -rf /tmp/etcd-download-test && mkdir -p /tmp/etcd-download-test
curl -L ${DOWNLOAD_URL}/${ETCD_VER}/etcd-${ETCD_VER}-darwin-amd64.zip -o /tmp/etcd-${ETCD_VER}-darwin-amd64.zip
unzip /tmp/etcd-${ETCD_VER}-darwin-amd64.zip -d /tmp && rm -f /tmp/etcd-${ETCD_VER}-darwin-amd64.zip
mv /tmp/etcd-${ETCD_VER}-darwin-amd64/* /tmp/etcd-download-test && rm -rf mv /tmp/etcd-${ETCD_VER}-darwin-amd64
/tmp/etcd-download-test/etcd --version
/tmp/etcd-download-test/etcdctl version
/tmp/etcd-download-test/etcdutl version
Docker
etcd uses gcr.io/etcd-development/etcd as a primary container registry, and quay.io/coreos/etcd as secondary.
ETCD_VER=v3.6.8
rm -rf /tmp/etcd-data.tmp && mkdir -p /tmp/etcd-data.tmp && \
docker rmi gcr.io/etcd-development/etcd:${ETCD_VER} || true && \
docker run \
-p 2379:2379 \
-p 2380:2380 \
--mount type=bind,source=/tmp/etcd-data.tmp,destination=/etcd-data \
--name etcd-gcr-${ETCD_VER} \
gcr.io/etcd-development/etcd:${ETCD_VER} \
/usr/local/bin/etcd \
--name s1 \
--data-dir /etcd-data \
--listen-client-urls http://0.0.0.0:2379 \
--advertise-client-urls http://0.0.0.0:2379 \
--listen-peer-urls http://0.0.0.0:2380 \
--initial-advertise-peer-urls http://0.0.0.0:2380 \
--initial-cluster s1=http://0.0.0.0:2380 \
--initial-cluster-token tkn \
--initial-cluster-state new \
--log-level info \
--logger zap \
--log-outputs stderr
docker exec etcd-gcr-${ETCD_VER} /usr/local/bin/etcd --version
docker exec etcd-gcr-${ETCD_VER} /usr/local/bin/etcdctl version
docker exec etcd-gcr-${ETCD_VER} /usr/local/bin/etcdutl version
docker exec etcd-gcr-${ETCD_VER} /usr/local/bin/etcdctl endpoint health
docker exec etcd-gcr-${ETCD_VER} /usr/local/bin/etcdctl put foo bar
docker exec etcd-gcr-${ETCD_VER} /usr/local/bin/etcdctl get foo
3.6.7 AP ۱۴۰۴ لیندۍ ۲۶ — 64-bit ZIP
د خپرونې یادښتونه
Please check out CHANGELOG for a full list of changes. And make sure to read upgrade guide before upgrading etcd (there may be breaking changes).
For installation guides, please check out play.etcd.io and operating etcd. Latest support status for common architectures and operating systems can be found at supported platforms.
Linux
ETCD_VER=v3.6.7
# choose either URL
GOOGLE_URL=https://storage.googleapis.com/etcd
GITHUB_URL=https://github.com/etcd-io/etcd/releases/download
DOWNLOAD_URL=${GOOGLE_URL}
rm -f /tmp/etcd-${ETCD_VER}-linux-amd64.tar.gz
rm -rf /tmp/etcd-download-test && mkdir -p /tmp/etcd-download-test
curl -L ${DOWNLOAD_URL}/${ETCD_VER}/etcd-${ETCD_VER}-linux-amd64.tar.gz -o /tmp/etcd-${ETCD_VER}-linux-amd64.tar.gz
tar xzvf /tmp/etcd-${ETCD_VER}-linux-amd64.tar.gz -C /tmp/etcd-download-test --strip-components=1 --no-same-owner
rm -f /tmp/etcd-${ETCD_VER}-linux-amd64.tar.gz
/tmp/etcd-download-test/etcd --version
/tmp/etcd-download-test/etcdctl version
/tmp/etcd-download-test/etcdutl version
# start a local etcd server
/tmp/etcd-download-test/etcd
# write,read to etcd
/tmp/etcd-download-test/etcdctl --endpoints=localhost:2379 put foo bar
/tmp/etcd-download-test/etcdctl --endpoints=localhost:2379 get foo
macOS (Darwin)
ETCD_VER=v3.6.7
# choose either URL
GOOGLE_URL=https://storage.googleapis.com/etcd
GITHUB_URL=https://github.com/etcd-io/etcd/releases/download
DOWNLOAD_URL=${GOOGLE_URL}
rm -f /tmp/etcd-${ETCD_VER}-darwin-amd64.zip
rm -rf /tmp/etcd-download-test && mkdir -p /tmp/etcd-download-test
curl -L ${DOWNLOAD_URL}/${ETCD_VER}/etcd-${ETCD_VER}-darwin-amd64.zip -o /tmp/etcd-${ETCD_VER}-darwin-amd64.zip
unzip /tmp/etcd-${ETCD_VER}-darwin-amd64.zip -d /tmp && rm -f /tmp/etcd-${ETCD_VER}-darwin-amd64.zip
mv /tmp/etcd-${ETCD_VER}-darwin-amd64/* /tmp/etcd-download-test && rm -rf mv /tmp/etcd-${ETCD_VER}-darwin-amd64
/tmp/etcd-download-test/etcd --version
/tmp/etcd-download-test/etcdctl version
/tmp/etcd-download-test/etcdutl version
Docker
etcd uses gcr.io/etcd-development/etcd as a primary container registry, and quay.io/coreos/etcd as secondary.
ETCD_VER=v3.6.7
rm -rf /tmp/etcd-data.tmp && mkdir -p /tmp/etcd-data.tmp && \
docker rmi gcr.io/etcd-development/etcd:${ETCD_VER} || true && \
docker run \
-p 2379:2379 \
-p 2380:2380 \
--mount type=bind,source=/tmp/etcd-data.tmp,destination=/etcd-data \
--name etcd-gcr-${ETCD_VER} \
gcr.io/etcd-development/etcd:${ETCD_VER} \
/usr/local/bin/etcd \
--name s1 \
--data-dir /etcd-data \
--listen-client-urls http://0.0.0.0:2379 \
--advertise-client-urls http://0.0.0.0:2379 \
--listen-peer-urls http://0.0.0.0:2380 \
--initial-advertise-peer-urls http://0.0.0.0:2380 \
--initial-cluster s1=http://0.0.0.0:2380 \
--initial-cluster-token tkn \
--initial-cluster-state new \
--log-level info \
--logger zap \
--log-outputs stderr
docker exec etcd-gcr-${ETCD_VER} /usr/local/bin/etcd --version
docker exec etcd-gcr-${ETCD_VER} /usr/local/bin/etcdctl version
docker exec etcd-gcr-${ETCD_VER} /usr/local/bin/etcdutl version
docker exec etcd-gcr-${ETCD_VER} /usr/local/bin/etcdctl endpoint health
docker exec etcd-gcr-${ETCD_VER} /usr/local/bin/etcdctl put foo bar
docker exec etcd-gcr-${ETCD_VER} /usr/local/bin/etcdctl get foo
3.6.6 AP ۱۴۰۴ لړم ۲۱ — 64-bit ZIP
د خپرونې یادښتونه
Please check out CHANGELOG for a full list of changes. And make sure to read upgrade guide before upgrading etcd (there may be breaking changes).
For installation guides, please check out play.etcd.io and operating etcd. Latest support status for common architectures and operating systems can be found at supported platforms.
Linux
ETCD_VER=v3.6.6
# choose either URL
GOOGLE_URL=https://storage.googleapis.com/etcd
GITHUB_URL=https://github.com/etcd-io/etcd/releases/download
DOWNLOAD_URL=${GOOGLE_URL}
rm -f /tmp/etcd-${ETCD_VER}-linux-amd64.tar.gz
rm -rf /tmp/etcd-download-test && mkdir -p /tmp/etcd-download-test
curl -L ${DOWNLOAD_URL}/${ETCD_VER}/etcd-${ETCD_VER}-linux-amd64.tar.gz -o /tmp/etcd-${ETCD_VER}-linux-amd64.tar.gz
tar xzvf /tmp/etcd-${ETCD_VER}-linux-amd64.tar.gz -C /tmp/etcd-download-test --strip-components=1 --no-same-owner
rm -f /tmp/etcd-${ETCD_VER}-linux-amd64.tar.gz
/tmp/etcd-download-test/etcd --version
/tmp/etcd-download-test/etcdctl version
/tmp/etcd-download-test/etcdutl version
# start a local etcd server
/tmp/etcd-download-test/etcd
# write,read to etcd
/tmp/etcd-download-test/etcdctl --endpoints=localhost:2379 put foo bar
/tmp/etcd-download-test/etcdctl --endpoints=localhost:2379 get foo
macOS (Darwin)
ETCD_VER=v3.6.6
# choose either URL
GOOGLE_URL=https://storage.googleapis.com/etcd
GITHUB_URL=https://github.com/etcd-io/etcd/releases/download
DOWNLOAD_URL=${GOOGLE_URL}
rm -f /tmp/etcd-${ETCD_VER}-darwin-amd64.zip
rm -rf /tmp/etcd-download-test && mkdir -p /tmp/etcd-download-test
curl -L ${DOWNLOAD_URL}/${ETCD_VER}/etcd-${ETCD_VER}-darwin-amd64.zip -o /tmp/etcd-${ETCD_VER}-darwin-amd64.zip
unzip /tmp/etcd-${ETCD_VER}-darwin-amd64.zip -d /tmp && rm -f /tmp/etcd-${ETCD_VER}-darwin-amd64.zip
mv /tmp/etcd-${ETCD_VER}-darwin-amd64/* /tmp/etcd-download-test && rm -rf mv /tmp/etcd-${ETCD_VER}-darwin-amd64
/tmp/etcd-download-test/etcd --version
/tmp/etcd-download-test/etcdctl version
/tmp/etcd-download-test/etcdutl version
Docker
etcd uses gcr.io/etcd-development/etcd as a primary container registry, and quay.io/coreos/etcd as secondary.
ETCD_VER=v3.6.6
rm -rf /tmp/etcd-data.tmp && mkdir -p /tmp/etcd-data.tmp && \
docker rmi gcr.io/etcd-development/etcd:${ETCD_VER} || true && \
docker run \
-p 2379:2379 \
-p 2380:2380 \
--mount type=bind,source=/tmp/etcd-data.tmp,destination=/etcd-data \
--name etcd-gcr-${ETCD_VER} \
gcr.io/etcd-development/etcd:${ETCD_VER} \
/usr/local/bin/etcd \
--name s1 \
--data-dir /etcd-data \
--listen-client-urls http://0.0.0.0:2379 \
--advertise-client-urls http://0.0.0.0:2379 \
--listen-peer-urls http://0.0.0.0:2380 \
--initial-advertise-peer-urls http://0.0.0.0:2380 \
--initial-cluster s1=http://0.0.0.0:2380 \
--initial-cluster-token tkn \
--initial-cluster-state new \
--log-level info \
--logger zap \
--log-outputs stderr
docker exec etcd-gcr-${ETCD_VER} /usr/local/bin/etcd --version
docker exec etcd-gcr-${ETCD_VER} /usr/local/bin/etcdctl version
docker exec etcd-gcr-${ETCD_VER} /usr/local/bin/etcdutl version
docker exec etcd-gcr-${ETCD_VER} /usr/local/bin/etcdctl endpoint health
docker exec etcd-gcr-${ETCD_VER} /usr/local/bin/etcdctl put foo bar
docker exec etcd-gcr-${ETCD_VER} /usr/local/bin/etcdctl get foo
3.6.5 AP ۱۴۰۴ وږی ۲۸ — 64-bit ZIP
د خپرونې یادښتونه
Please check out CHANGELOG for a full list of changes. And make sure to read upgrade guide before upgrading etcd (there may be breaking changes).
For installation guides, please check out play.etcd.io and operating etcd. Latest support status for common architectures and operating systems can be found at supported platforms.
Linux
ETCD_VER=v3.6.5
# choose either URL
GOOGLE_URL=https://storage.googleapis.com/etcd
GITHUB_URL=https://github.com/etcd-io/etcd/releases/download
DOWNLOAD_URL=${GOOGLE_URL}
rm -f /tmp/etcd-${ETCD_VER}-linux-amd64.tar.gz
rm -rf /tmp/etcd-download-test && mkdir -p /tmp/etcd-download-test
curl -L ${DOWNLOAD_URL}/${ETCD_VER}/etcd-${ETCD_VER}-linux-amd64.tar.gz -o /tmp/etcd-${ETCD_VER}-linux-amd64.tar.gz
tar xzvf /tmp/etcd-${ETCD_VER}-linux-amd64.tar.gz -C /tmp/etcd-download-test --strip-components=1 --no-same-owner
rm -f /tmp/etcd-${ETCD_VER}-linux-amd64.tar.gz
/tmp/etcd-download-test/etcd --version
/tmp/etcd-download-test/etcdctl version
/tmp/etcd-download-test/etcdutl version
# start a local etcd server
/tmp/etcd-download-test/etcd
# write,read to etcd
/tmp/etcd-download-test/etcdctl --endpoints=localhost:2379 put foo bar
/tmp/etcd-download-test/etcdctl --endpoints=localhost:2379 get foo
macOS (Darwin)
ETCD_VER=v3.6.5
# choose either URL
GOOGLE_URL=https://storage.googleapis.com/etcd
GITHUB_URL=https://github.com/etcd-io/etcd/releases/download
DOWNLOAD_URL=${GOOGLE_URL}
rm -f /tmp/etcd-${ETCD_VER}-darwin-amd64.zip
rm -rf /tmp/etcd-download-test && mkdir -p /tmp/etcd-download-test
curl -L ${DOWNLOAD_URL}/${ETCD_VER}/etcd-${ETCD_VER}-darwin-amd64.zip -o /tmp/etcd-${ETCD_VER}-darwin-amd64.zip
unzip /tmp/etcd-${ETCD_VER}-darwin-amd64.zip -d /tmp && rm -f /tmp/etcd-${ETCD_VER}-darwin-amd64.zip
mv /tmp/etcd-${ETCD_VER}-darwin-amd64/* /tmp/etcd-download-test && rm -rf mv /tmp/etcd-${ETCD_VER}-darwin-amd64
/tmp/etcd-download-test/etcd --version
/tmp/etcd-download-test/etcdctl version
/tmp/etcd-download-test/etcdutl version
Docker
etcd uses gcr.io/etcd-development/etcd as a primary container registry, and quay.io/coreos/etcd as secondary.
ETCD_VER=v3.6.5
rm -rf /tmp/etcd-data.tmp && mkdir -p /tmp/etcd-data.tmp && \
docker rmi gcr.io/etcd-development/etcd:${ETCD_VER} || true && \
docker run \
-p 2379:2379 \
-p 2380:2380 \
--mount type=bind,source=/tmp/etcd-data.tmp,destination=/etcd-data \
--name etcd-gcr-${ETCD_VER} \
gcr.io/etcd-development/etcd:${ETCD_VER} \
/usr/local/bin/etcd \
--name s1 \
--data-dir /etcd-data \
--listen-client-urls http://0.0.0.0:2379 \
--advertise-client-urls http://0.0.0.0:2379 \
--listen-peer-urls http://0.0.0.0:2380 \
--initial-advertise-peer-urls http://0.0.0.0:2380 \
--initial-cluster s1=http://0.0.0.0:2380 \
--initial-cluster-token tkn \
--initial-cluster-state new \
--log-level info \
--logger zap \
--log-outputs stderr
docker exec etcd-gcr-${ETCD_VER} /usr/local/bin/etcd --version
docker exec etcd-gcr-${ETCD_VER} /usr/local/bin/etcdctl version
docker exec etcd-gcr-${ETCD_VER} /usr/local/bin/etcdutl version
docker exec etcd-gcr-${ETCD_VER} /usr/local/bin/etcdctl endpoint health
docker exec etcd-gcr-${ETCD_VER} /usr/local/bin/etcdctl put foo bar
docker exec etcd-gcr-${ETCD_VER} /usr/local/bin/etcdctl get foo
3.6.4 AP ۱۴۰۴ زمری ۳ — 64-bit ZIP
د خپرونې یادښتونه
Please check out CHANGELOG for a full list of changes. And make sure to read upgrade guide before upgrading etcd (there may be breaking changes).
For installation guides, please check out play.etcd.io and operating etcd. Latest support status for common architectures and operating systems can be found at supported platforms.
Linux
ETCD_VER=v3.6.4
# choose either URL
GOOGLE_URL=https://storage.googleapis.com/etcd
GITHUB_URL=https://github.com/etcd-io/etcd/releases/download
DOWNLOAD_URL=${GOOGLE_URL}
rm -f /tmp/etcd-${ETCD_VER}-linux-amd64.tar.gz
rm -rf /tmp/etcd-download-test && mkdir -p /tmp/etcd-download-test
curl -L ${DOWNLOAD_URL}/${ETCD_VER}/etcd-${ETCD_VER}-linux-amd64.tar.gz -o /tmp/etcd-${ETCD_VER}-linux-amd64.tar.gz
tar xzvf /tmp/etcd-${ETCD_VER}-linux-amd64.tar.gz -C /tmp/etcd-download-test --strip-components=1 --no-same-owner
rm -f /tmp/etcd-${ETCD_VER}-linux-amd64.tar.gz
/tmp/etcd-download-test/etcd --version
/tmp/etcd-download-test/etcdctl version
/tmp/etcd-download-test/etcdutl version
# start a local etcd server
/tmp/etcd-download-test/etcd
# write,read to etcd
/tmp/etcd-download-test/etcdctl --endpoints=localhost:2379 put foo bar
/tmp/etcd-download-test/etcdctl --endpoints=localhost:2379 get foo
macOS (Darwin)
ETCD_VER=v3.6.4
# choose either URL
GOOGLE_URL=https://storage.googleapis.com/etcd
GITHUB_URL=https://github.com/etcd-io/etcd/releases/download
DOWNLOAD_URL=${GOOGLE_URL}
rm -f /tmp/etcd-${ETCD_VER}-darwin-amd64.zip
rm -rf /tmp/etcd-download-test && mkdir -p /tmp/etcd-download-test
curl -L ${DOWNLOAD_URL}/${ETCD_VER}/etcd-${ETCD_VER}-darwin-amd64.zip -o /tmp/etcd-${ETCD_VER}-darwin-amd64.zip
unzip /tmp/etcd-${ETCD_VER}-darwin-amd64.zip -d /tmp && rm -f /tmp/etcd-${ETCD_VER}-darwin-amd64.zip
mv /tmp/etcd-${ETCD_VER}-darwin-amd64/* /tmp/etcd-download-test && rm -rf mv /tmp/etcd-${ETCD_VER}-darwin-amd64
/tmp/etcd-download-test/etcd --version
/tmp/etcd-download-test/etcdctl version
/tmp/etcd-download-test/etcdutl version
Docker
etcd uses gcr.io/etcd-development/etcd as a primary container registry, and quay.io/coreos/etcd as secondary.
ETCD_VER=v3.6.4
rm -rf /tmp/etcd-data.tmp && mkdir -p /tmp/etcd-data.tmp && \
docker rmi gcr.io/etcd-development/etcd:${ETCD_VER} || true && \
docker run \
-p 2379:2379 \
-p 2380:2380 \
--mount type=bind,source=/tmp/etcd-data.tmp,destination=/etcd-data \
--name etcd-gcr-${ETCD_VER} \
gcr.io/etcd-development/etcd:${ETCD_VER} \
/usr/local/bin/etcd \
--name s1 \
--data-dir /etcd-data \
--listen-client-urls http://0.0.0.0:2379 \
--advertise-client-urls http://0.0.0.0:2379 \
--listen-peer-urls http://0.0.0.0:2380 \
--initial-advertise-peer-urls http://0.0.0.0:2380 \
--initial-cluster s1=http://0.0.0.0:2380 \
--initial-cluster-token tkn \
--initial-cluster-state new \
--log-level info \
--logger zap \
--log-outputs stderr
docker exec etcd-gcr-${ETCD_VER} /usr/local/bin/etcd --version
docker exec etcd-gcr-${ETCD_VER} /usr/local/bin/etcdctl version
docker exec etcd-gcr-${ETCD_VER} /usr/local/bin/etcdutl version
docker exec etcd-gcr-${ETCD_VER} /usr/local/bin/etcdctl endpoint health
docker exec etcd-gcr-${ETCD_VER} /usr/local/bin/etcdctl put foo bar
docker exec etcd-gcr-${ETCD_VER} /usr/local/bin/etcdctl get foo
3.6.3 AP ۱۴۰۴ چنگاښ ۳۱ — 64-bit ZIP
د خپرونې یادښتونه
Please check out CHANGELOG for a full list of changes. And make sure to read upgrade guide before upgrading etcd (there may be breaking changes).
For installation guides, please check out play.etcd.io and operating etcd. Latest support status for common architectures and operating systems can be found at supported platforms.
Linux
ETCD_VER=v3.6.3
# choose either URL
GOOGLE_URL=https://storage.googleapis.com/etcd
GITHUB_URL=https://github.com/etcd-io/etcd/releases/download
DOWNLOAD_URL=${GOOGLE_URL}
rm -f /tmp/etcd-${ETCD_VER}-linux-amd64.tar.gz
rm -rf /tmp/etcd-download-test && mkdir -p /tmp/etcd-download-test
curl -L ${DOWNLOAD_URL}/${ETCD_VER}/etcd-${ETCD_VER}-linux-amd64.tar.gz -o /tmp/etcd-${ETCD_VER}-linux-amd64.tar.gz
tar xzvf /tmp/etcd-${ETCD_VER}-linux-amd64.tar.gz -C /tmp/etcd-download-test --strip-components=1 --no-same-owner
rm -f /tmp/etcd-${ETCD_VER}-linux-amd64.tar.gz
/tmp/etcd-download-test/etcd --version
/tmp/etcd-download-test/etcdctl version
/tmp/etcd-download-test/etcdutl version
# start a local etcd server
/tmp/etcd-download-test/etcd
# write,read to etcd
/tmp/etcd-download-test/etcdctl --endpoints=localhost:2379 put foo bar
/tmp/etcd-download-test/etcdctl --endpoints=localhost:2379 get foo
macOS (Darwin)
ETCD_VER=v3.6.3
# choose either URL
GOOGLE_URL=https://storage.googleapis.com/etcd
GITHUB_URL=https://github.com/etcd-io/etcd/releases/download
DOWNLOAD_URL=${GOOGLE_URL}
rm -f /tmp/etcd-${ETCD_VER}-darwin-amd64.zip
rm -rf /tmp/etcd-download-test && mkdir -p /tmp/etcd-download-test
curl -L ${DOWNLOAD_URL}/${ETCD_VER}/etcd-${ETCD_VER}-darwin-amd64.zip -o /tmp/etcd-${ETCD_VER}-darwin-amd64.zip
unzip /tmp/etcd-${ETCD_VER}-darwin-amd64.zip -d /tmp && rm -f /tmp/etcd-${ETCD_VER}-darwin-amd64.zip
mv /tmp/etcd-${ETCD_VER}-darwin-amd64/* /tmp/etcd-download-test && rm -rf mv /tmp/etcd-${ETCD_VER}-darwin-amd64
/tmp/etcd-download-test/etcd --version
/tmp/etcd-download-test/etcdctl version
/tmp/etcd-download-test/etcdutl version
Docker
etcd uses gcr.io/etcd-development/etcd as a primary container registry, and quay.io/coreos/etcd as secondary.
ETCD_VER=v3.6.3
rm -rf /tmp/etcd-data.tmp && mkdir -p /tmp/etcd-data.tmp && \
docker rmi gcr.io/etcd-development/etcd:${ETCD_VER} || true && \
docker run \
-p 2379:2379 \
-p 2380:2380 \
--mount type=bind,source=/tmp/etcd-data.tmp,destination=/etcd-data \
--name etcd-gcr-${ETCD_VER} \
gcr.io/etcd-development/etcd:${ETCD_VER} \
/usr/local/bin/etcd \
--name s1 \
--data-dir /etcd-data \
--listen-client-urls http://0.0.0.0:2379 \
--advertise-client-urls http://0.0.0.0:2379 \
--listen-peer-urls http://0.0.0.0:2380 \
--initial-advertise-peer-urls http://0.0.0.0:2380 \
--initial-cluster s1=http://0.0.0.0:2380 \
--initial-cluster-token tkn \
--initial-cluster-state new \
--log-level info \
--logger zap \
--log-outputs stderr
docker exec etcd-gcr-${ETCD_VER} /usr/local/bin/etcd --version
docker exec etcd-gcr-${ETCD_VER} /usr/local/bin/etcdctl version
docker exec etcd-gcr-${ETCD_VER} /usr/local/bin/etcdutl version
docker exec etcd-gcr-${ETCD_VER} /usr/local/bin/etcdctl endpoint health
docker exec etcd-gcr-${ETCD_VER} /usr/local/bin/etcdctl put foo bar
docker exec etcd-gcr-${ETCD_VER} /usr/local/bin/etcdctl get foo
3.6.2 AP ۱۴۰۴ چنگاښ ۱۹ — 64-bit ZIP
د خپرونې یادښتونه
Please check out CHANGELOG for a full list of changes. And make sure to read upgrade guide before upgrading etcd (there may be breaking changes).
For installation guides, please check out play.etcd.io and operating etcd. Latest support status for common architectures and operating systems can be found at supported platforms.
Linux
ETCD_VER=v3.6.2
# choose either URL
GOOGLE_URL=https://storage.googleapis.com/etcd
GITHUB_URL=https://github.com/etcd-io/etcd/releases/download
DOWNLOAD_URL=${GOOGLE_URL}
rm -f /tmp/etcd-${ETCD_VER}-linux-amd64.tar.gz
rm -rf /tmp/etcd-download-test && mkdir -p /tmp/etcd-download-test
curl -L ${DOWNLOAD_URL}/${ETCD_VER}/etcd-${ETCD_VER}-linux-amd64.tar.gz -o /tmp/etcd-${ETCD_VER}-linux-amd64.tar.gz
tar xzvf /tmp/etcd-${ETCD_VER}-linux-amd64.tar.gz -C /tmp/etcd-download-test --strip-components=1 --no-same-owner
rm -f /tmp/etcd-${ETCD_VER}-linux-amd64.tar.gz
/tmp/etcd-download-test/etcd --version
/tmp/etcd-download-test/etcdctl version
/tmp/etcd-download-test/etcdutl version
# start a local etcd server
/tmp/etcd-download-test/etcd
# write,read to etcd
/tmp/etcd-download-test/etcdctl --endpoints=localhost:2379 put foo bar
/tmp/etcd-download-test/etcdctl --endpoints=localhost:2379 get foo
macOS (Darwin)
ETCD_VER=v3.6.2
# choose either URL
GOOGLE_URL=https://storage.googleapis.com/etcd
GITHUB_URL=https://github.com/etcd-io/etcd/releases/download
DOWNLOAD_URL=${GOOGLE_URL}
rm -f /tmp/etcd-${ETCD_VER}-darwin-amd64.zip
rm -rf /tmp/etcd-download-test && mkdir -p /tmp/etcd-download-test
curl -L ${DOWNLOAD_URL}/${ETCD_VER}/etcd-${ETCD_VER}-darwin-amd64.zip -o /tmp/etcd-${ETCD_VER}-darwin-amd64.zip
unzip /tmp/etcd-${ETCD_VER}-darwin-amd64.zip -d /tmp && rm -f /tmp/etcd-${ETCD_VER}-darwin-amd64.zip
mv /tmp/etcd-${ETCD_VER}-darwin-amd64/* /tmp/etcd-download-test && rm -rf mv /tmp/etcd-${ETCD_VER}-darwin-amd64
/tmp/etcd-download-test/etcd --version
/tmp/etcd-download-test/etcdctl version
/tmp/etcd-download-test/etcdutl version
Docker
etcd uses gcr.io/etcd-development/etcd as a primary container registry, and quay.io/coreos/etcd as secondary.
ETCD_VER=v3.6.2
rm -rf /tmp/etcd-data.tmp && mkdir -p /tmp/etcd-data.tmp && \
docker rmi gcr.io/etcd-development/etcd:${ETCD_VER} || true && \
docker run \
-p 2379:2379 \
-p 2380:2380 \
--mount type=bind,source=/tmp/etcd-data.tmp,destination=/etcd-data \
--name etcd-gcr-${ETCD_VER} \
gcr.io/etcd-development/etcd:${ETCD_VER} \
/usr/local/bin/etcd \
--name s1 \
--data-dir /etcd-data \
--listen-client-urls http://0.0.0.0:2379 \
--advertise-client-urls http://0.0.0.0:2379 \
--listen-peer-urls http://0.0.0.0:2380 \
--initial-advertise-peer-urls http://0.0.0.0:2380 \
--initial-cluster s1=http://0.0.0.0:2380 \
--initial-cluster-token tkn \
--initial-cluster-state new \
--log-level info \
--logger zap \
--log-outputs stderr
docker exec etcd-gcr-${ETCD_VER} /usr/local/bin/etcd --version
docker exec etcd-gcr-${ETCD_VER} /usr/local/bin/etcdctl version
docker exec etcd-gcr-${ETCD_VER} /usr/local/bin/etcdutl version
docker exec etcd-gcr-${ETCD_VER} /usr/local/bin/etcdctl endpoint health
docker exec etcd-gcr-${ETCD_VER} /usr/local/bin/etcdctl put foo bar
docker exec etcd-gcr-${ETCD_VER} /usr/local/bin/etcdctl get foo
3.6.1 AP ۱۴۰۴ غبرگولی ۱۶ — 64-bit ZIP
د خپرونې یادښتونه
Please check out CHANGELOG for a full list of changes. And make sure to read upgrade guide before upgrading etcd (there may be breaking changes).
For installation guides, please check out play.etcd.io and operating etcd. Latest support status for common architectures and operating systems can be found at supported platforms.
Linux
ETCD_VER=v3.6.1
# choose either URL
GOOGLE_URL=https://storage.googleapis.com/etcd
GITHUB_URL=https://github.com/etcd-io/etcd/releases/download
DOWNLOAD_URL=${GOOGLE_URL}
rm -f /tmp/etcd-${ETCD_VER}-linux-amd64.tar.gz
rm -rf /tmp/etcd-download-test && mkdir -p /tmp/etcd-download-test
curl -L ${DOWNLOAD_URL}/${ETCD_VER}/etcd-${ETCD_VER}-linux-amd64.tar.gz -o /tmp/etcd-${ETCD_VER}-linux-amd64.tar.gz
tar xzvf /tmp/etcd-${ETCD_VER}-linux-amd64.tar.gz -C /tmp/etcd-download-test --strip-components=1 --no-same-owner
rm -f /tmp/etcd-${ETCD_VER}-linux-amd64.tar.gz
/tmp/etcd-download-test/etcd --version
/tmp/etcd-download-test/etcdctl version
/tmp/etcd-download-test/etcdutl version
# start a local etcd server
/tmp/etcd-download-test/etcd
# write,read to etcd
/tmp/etcd-download-test/etcdctl --endpoints=localhost:2379 put foo bar
/tmp/etcd-download-test/etcdctl --endpoints=localhost:2379 get foo
macOS (Darwin)
ETCD_VER=v3.6.1
# choose either URL
GOOGLE_URL=https://storage.googleapis.com/etcd
GITHUB_URL=https://github.com/etcd-io/etcd/releases/download
DOWNLOAD_URL=${GOOGLE_URL}
rm -f /tmp/etcd-${ETCD_VER}-darwin-amd64.zip
rm -rf /tmp/etcd-download-test && mkdir -p /tmp/etcd-download-test
curl -L ${DOWNLOAD_URL}/${ETCD_VER}/etcd-${ETCD_VER}-darwin-amd64.zip -o /tmp/etcd-${ETCD_VER}-darwin-amd64.zip
unzip /tmp/etcd-${ETCD_VER}-darwin-amd64.zip -d /tmp && rm -f /tmp/etcd-${ETCD_VER}-darwin-amd64.zip
mv /tmp/etcd-${ETCD_VER}-darwin-amd64/* /tmp/etcd-download-test && rm -rf mv /tmp/etcd-${ETCD_VER}-darwin-amd64
/tmp/etcd-download-test/etcd --version
/tmp/etcd-download-test/etcdctl version
/tmp/etcd-download-test/etcdutl version
Docker
etcd uses gcr.io/etcd-development/etcd as a primary container registry, and quay.io/coreos/etcd as secondary.
ETCD_VER=v3.6.1
rm -rf /tmp/etcd-data.tmp && mkdir -p /tmp/etcd-data.tmp && \
docker rmi gcr.io/etcd-development/etcd:${ETCD_VER} || true && \
docker run \
-p 2379:2379 \
-p 2380:2380 \
--mount type=bind,source=/tmp/etcd-data.tmp,destination=/etcd-data \
--name etcd-gcr-${ETCD_VER} \
gcr.io/etcd-development/etcd:${ETCD_VER} \
/usr/local/bin/etcd \
--name s1 \
--data-dir /etcd-data \
--listen-client-urls http://0.0.0.0:2379 \
--advertise-client-urls http://0.0.0.0:2379 \
--listen-peer-urls http://0.0.0.0:2380 \
--initial-advertise-peer-urls http://0.0.0.0:2380 \
--initial-cluster s1=http://0.0.0.0:2380 \
--initial-cluster-token tkn \
--initial-cluster-state new \
--log-level info \
--logger zap \
--log-outputs stderr
docker exec etcd-gcr-${ETCD_VER} /usr/local/bin/etcd --version
docker exec etcd-gcr-${ETCD_VER} /usr/local/bin/etcdctl version
docker exec etcd-gcr-${ETCD_VER} /usr/local/bin/etcdutl version
docker exec etcd-gcr-${ETCD_VER} /usr/local/bin/etcdctl endpoint health
docker exec etcd-gcr-${ETCD_VER} /usr/local/bin/etcdctl put foo bar
docker exec etcd-gcr-${ETCD_VER} /usr/local/bin/etcdctl get foo
3.6.0 AP ۱۴۰۴ غویی ۲۵ — 64-bit ZIP
د خپرونې یادښتونه
Please check out CHANGELOG for a full list of changes. And make sure to read upgrade guide before upgrading etcd (there may be breaking changes).
For installation guides, please check out play.etcd.io and operating etcd. Latest support status for common architectures and operating systems can be found at supported platforms.
Linux
ETCD_VER=v3.6.0
# choose either URL
GOOGLE_URL=https://storage.googleapis.com/etcd
GITHUB_URL=https://github.com/etcd-io/etcd/releases/download
DOWNLOAD_URL=${GOOGLE_URL}
rm -f /tmp/etcd-${ETCD_VER}-linux-amd64.tar.gz
rm -rf /tmp/etcd-download-test && mkdir -p /tmp/etcd-download-test
curl -L ${DOWNLOAD_URL}/${ETCD_VER}/etcd-${ETCD_VER}-linux-amd64.tar.gz -o /tmp/etcd-${ETCD_VER}-linux-amd64.tar.gz
tar xzvf /tmp/etcd-${ETCD_VER}-linux-amd64.tar.gz -C /tmp/etcd-download-test --strip-components=1 --no-same-owner
rm -f /tmp/etcd-${ETCD_VER}-linux-amd64.tar.gz
/tmp/etcd-download-test/etcd --version
/tmp/etcd-download-test/etcdctl version
/tmp/etcd-download-test/etcdutl version
# start a local etcd server
/tmp/etcd-download-test/etcd
# write,read to etcd
/tmp/etcd-download-test/etcdctl --endpoints=localhost:2379 put foo bar
/tmp/etcd-download-test/etcdctl --endpoints=localhost:2379 get foo
macOS (Darwin)
ETCD_VER=v3.6.0
# choose either URL
GOOGLE_URL=https://storage.googleapis.com/etcd
GITHUB_URL=https://github.com/etcd-io/etcd/releases/download
DOWNLOAD_URL=${GOOGLE_URL}
rm -f /tmp/etcd-${ETCD_VER}-darwin-amd64.zip
rm -rf /tmp/etcd-download-test && mkdir -p /tmp/etcd-download-test
curl -L ${DOWNLOAD_URL}/${ETCD_VER}/etcd-${ETCD_VER}-darwin-amd64.zip -o /tmp/etcd-${ETCD_VER}-darwin-amd64.zip
unzip /tmp/etcd-${ETCD_VER}-darwin-amd64.zip -d /tmp && rm -f /tmp/etcd-${ETCD_VER}-darwin-amd64.zip
mv /tmp/etcd-${ETCD_VER}-darwin-amd64/* /tmp/etcd-download-test && rm -rf mv /tmp/etcd-${ETCD_VER}-darwin-amd64
/tmp/etcd-download-test/etcd --version
/tmp/etcd-download-test/etcdctl version
/tmp/etcd-download-test/etcdutl version
Docker
etcd uses gcr.io/etcd-development/etcd as a primary container registry, and quay.io/coreos/etcd as secondary.
ETCD_VER=v3.6.0
rm -rf /tmp/etcd-data.tmp && mkdir -p /tmp/etcd-data.tmp && \
docker rmi gcr.io/etcd-development/etcd:${ETCD_VER} || true && \
docker run \
-p 2379:2379 \
-p 2380:2380 \
--mount type=bind,source=/tmp/etcd-data.tmp,destination=/etcd-data \
--name etcd-gcr-${ETCD_VER} \
gcr.io/etcd-development/etcd:${ETCD_VER} \
/usr/local/bin/etcd \
--name s1 \
--data-dir /etcd-data \
--listen-client-urls http://0.0.0.0:2379 \
--advertise-client-urls http://0.0.0.0:2379 \
--listen-peer-urls http://0.0.0.0:2380 \
--initial-advertise-peer-urls http://0.0.0.0:2380 \
--initial-cluster s1=http://0.0.0.0:2380 \
--initial-cluster-token tkn \
--initial-cluster-state new \
--log-level info \
--logger zap \
--log-outputs stderr
docker exec etcd-gcr-${ETCD_VER} /usr/local/bin/etcd --version
docker exec etcd-gcr-${ETCD_VER} /usr/local/bin/etcdctl version
docker exec etcd-gcr-${ETCD_VER} /usr/local/bin/etcdutl version
docker exec etcd-gcr-${ETCD_VER} /usr/local/bin/etcdctl endpoint health
docker exec etcd-gcr-${ETCD_VER} /usr/local/bin/etcdctl put foo bar
docker exec etcd-gcr-${ETCD_VER} /usr/local/bin/etcdctl get foo
3.5.21 AP ۱۴۰۴ وری ۷ — 64-bit ZIP
د خپرونې یادښتونه
Please check out CHANGELOG for a full list of changes. And make sure to read upgrade guide before upgrading etcd (there may be breaking changes).
For installation guides, please check out play.etcd.io and operating etcd. Latest support status for common architectures and operating systems can be found at supported platforms.
Linux
ETCD_VER=v3.5.21
# choose either URL
GOOGLE_URL=https://storage.googleapis.com/etcd
GITHUB_URL=https://github.com/etcd-io/etcd/releases/download
DOWNLOAD_URL=${GOOGLE_URL}
rm -f /tmp/etcd-${ETCD_VER}-linux-amd64.tar.gz
rm -rf /tmp/etcd-download-test && mkdir -p /tmp/etcd-download-test
curl -L ${DOWNLOAD_URL}/${ETCD_VER}/etcd-${ETCD_VER}-linux-amd64.tar.gz -o /tmp/etcd-${ETCD_VER}-linux-amd64.tar.gz
tar xzvf /tmp/etcd-${ETCD_VER}-linux-amd64.tar.gz -C /tmp/etcd-download-test --strip-components=1
rm -f /tmp/etcd-${ETCD_VER}-linux-amd64.tar.gz
/tmp/etcd-download-test/etcd --version
/tmp/etcd-download-test/etcdctl version
/tmp/etcd-download-test/etcdutl version
# start a local etcd server
/tmp/etcd-download-test/etcd
# write,read to etcd
/tmp/etcd-download-test/etcdctl --endpoints=localhost:2379 put foo bar
/tmp/etcd-download-test/etcdctl --endpoints=localhost:2379 get foo
macOS (Darwin)
ETCD_VER=v3.5.21
# choose either URL
GOOGLE_URL=https://storage.googleapis.com/etcd
GITHUB_URL=https://github.com/etcd-io/etcd/releases/download
DOWNLOAD_URL=${GOOGLE_URL}
rm -f /tmp/etcd-${ETCD_VER}-darwin-amd64.zip
rm -rf /tmp/etcd-download-test && mkdir -p /tmp/etcd-download-test
curl -L ${DOWNLOAD_URL}/${ETCD_VER}/etcd-${ETCD_VER}-darwin-amd64.zip -o /tmp/etcd-${ETCD_VER}-darwin-amd64.zip
unzip /tmp/etcd-${ETCD_VER}-darwin-amd64.zip -d /tmp && rm -f /tmp/etcd-${ETCD_VER}-darwin-amd64.zip
mv /tmp/etcd-${ETCD_VER}-darwin-amd64/* /tmp/etcd-download-test && rm -rf mv /tmp/etcd-${ETCD_VER}-darwin-amd64
/tmp/etcd-download-test/etcd --version
/tmp/etcd-download-test/etcdctl version
/tmp/etcd-download-test/etcdutl version
Docker
etcd uses gcr.io/etcd-development/etcd as a primary container registry, and quay.io/coreos/etcd as secondary.
ETCD_VER=v3.5.21
rm -rf /tmp/etcd-data.tmp && mkdir -p /tmp/etcd-data.tmp && \
docker rmi gcr.io/etcd-development/etcd:${ETCD_VER} || true && \
docker run \
-p 2379:2379 \
-p 2380:2380 \
--mount type=bind,source=/tmp/etcd-data.tmp,destination=/etcd-data \
--name etcd-gcr-${ETCD_VER} \
gcr.io/etcd-development/etcd:${ETCD_VER} \
/usr/local/bin/etcd \
--name s1 \
--data-dir /etcd-data \
--listen-client-urls http://0.0.0.0:2379 \
--advertise-client-urls http://0.0.0.0:2379 \
--listen-peer-urls http://0.0.0.0:2380 \
--initial-advertise-peer-urls http://0.0.0.0:2380 \
--initial-cluster s1=http://0.0.0.0:2380 \
--initial-cluster-token tkn \
--initial-cluster-state new \
--log-level info \
--logger zap \
--log-outputs stderr
docker exec etcd-gcr-${ETCD_VER} /usr/local/bin/etcd --version
docker exec etcd-gcr-${ETCD_VER} /usr/local/bin/etcdctl version
docker exec etcd-gcr-${ETCD_VER} /usr/local/bin/etcdutl version
docker exec etcd-gcr-${ETCD_VER} /usr/local/bin/etcdctl endpoint health
docker exec etcd-gcr-${ETCD_VER} /usr/local/bin/etcdctl put foo bar
docker exec etcd-gcr-${ETCD_VER} /usr/local/bin/etcdctl get foo
3.5.18 AP ۱۴۰۳ سلواغه ۵ — 64-bit ZIP
د خپرونې یادښتونه
Please check out CHANGELOG for a full list of changes. And make sure to read upgrade guide before upgrading etcd (there may be breaking changes).
For installation guides, please check out play.etcd.io and operating etcd. Latest support status for common architectures and operating systems can be found at supported platforms.
Linux
ETCD_VER=v3.5.18
# choose either URL
GOOGLE_URL=https://storage.googleapis.com/etcd
GITHUB_URL=https://github.com/etcd-io/etcd/releases/download
DOWNLOAD_URL=${GOOGLE_URL}
rm -f /tmp/etcd-${ETCD_VER}-linux-amd64.tar.gz
rm -rf /tmp/etcd-download-test && mkdir -p /tmp/etcd-download-test
curl -L ${DOWNLOAD_URL}/${ETCD_VER}/etcd-${ETCD_VER}-linux-amd64.tar.gz -o /tmp/etcd-${ETCD_VER}-linux-amd64.tar.gz
tar xzvf /tmp/etcd-${ETCD_VER}-linux-amd64.tar.gz -C /tmp/etcd-download-test --strip-components=1
rm -f /tmp/etcd-${ETCD_VER}-linux-amd64.tar.gz
/tmp/etcd-download-test/etcd --version
/tmp/etcd-download-test/etcdctl version
/tmp/etcd-download-test/etcdutl version
# start a local etcd server
/tmp/etcd-download-test/etcd
# write,read to etcd
/tmp/etcd-download-test/etcdctl --endpoints=localhost:2379 put foo bar
/tmp/etcd-download-test/etcdctl --endpoints=localhost:2379 get foo
macOS (Darwin)
ETCD_VER=v3.5.18
# choose either URL
GOOGLE_URL=https://storage.googleapis.com/etcd
GITHUB_URL=https://github.com/etcd-io/etcd/releases/download
DOWNLOAD_URL=${GOOGLE_URL}
rm -f /tmp/etcd-${ETCD_VER}-darwin-amd64.zip
rm -rf /tmp/etcd-download-test && mkdir -p /tmp/etcd-download-test
curl -L ${DOWNLOAD_URL}/${ETCD_VER}/etcd-${ETCD_VER}-darwin-amd64.zip -o /tmp/etcd-${ETCD_VER}-darwin-amd64.zip
unzip /tmp/etcd-${ETCD_VER}-darwin-amd64.zip -d /tmp && rm -f /tmp/etcd-${ETCD_VER}-darwin-amd64.zip
mv /tmp/etcd-${ETCD_VER}-darwin-amd64/* /tmp/etcd-download-test && rm -rf mv /tmp/etcd-${ETCD_VER}-darwin-amd64
/tmp/etcd-download-test/etcd --version
/tmp/etcd-download-test/etcdctl version
/tmp/etcd-download-test/etcdutl version
Docker
etcd uses gcr.io/etcd-development/etcd as a primary container registry, and quay.io/coreos/etcd as secondary.
ETCD_VER=v3.5.18
rm -rf /tmp/etcd-data.tmp && mkdir -p /tmp/etcd-data.tmp && \
docker rmi gcr.io/etcd-development/etcd:${ETCD_VER} || true && \
docker run \
-p 2379:2379 \
-p 2380:2380 \
--mount type=bind,source=/tmp/etcd-data.tmp,destination=/etcd-data \
--name etcd-gcr-${ETCD_VER} \
gcr.io/etcd-development/etcd:${ETCD_VER} \
/usr/local/bin/etcd \
--name s1 \
--data-dir /etcd-data \
--listen-client-urls http://0.0.0.0:2379 \
--advertise-client-urls http://0.0.0.0:2379 \
--listen-peer-urls http://0.0.0.0:2380 \
--initial-advertise-peer-urls http://0.0.0.0:2380 \
--initial-cluster s1=http://0.0.0.0:2380 \
--initial-cluster-token tkn \
--initial-cluster-state new \
--log-level info \
--logger zap \
--log-outputs stderr
docker exec etcd-gcr-${ETCD_VER} /usr/local/bin/etcd --version
docker exec etcd-gcr-${ETCD_VER} /usr/local/bin/etcdctl version
docker exec etcd-gcr-${ETCD_VER} /usr/local/bin/etcdutl version
docker exec etcd-gcr-${ETCD_VER} /usr/local/bin/etcdctl endpoint health
docker exec etcd-gcr-${ETCD_VER} /usr/local/bin/etcdctl put foo bar
docker exec etcd-gcr-${ETCD_VER} /usr/local/bin/etcdctl get foo
3.5.9 AP ۱۴۰۲ غبرگولی ۲۱ — 64-bit ZIP
3.4.31 AP ۱۴۰۳ وری ۱ — 64-bit ZIP

په د پروګرام ژبې او SDK کې تر ټولو مشهور

ټول وګورئ
  1. Go Programming Languageد پروګرام ژبې او SDK
  2. LLVMد پروګرام ژبې او SDK · LLVM
  3. Denoد پروګرام ژبې او SDK · Deno Land Inc.
  4. CMakeد پروګرام ژبې او SDK · Kitware
  5. Yarnد پروګرام ژبې او SDK · Yarn Contributors
  6. Ccacheد پروګرام ژبې او SDK · Joel Rosdahl
  7. sbtد پروګرام ژبې او SDK · Lightbend, Inc.
  8. BOINCد پروګرام ژبې او SDK · Space Sciences Laboratory, U.C. Berkeley
  9. Dart SDKد پروګرام ژبې او SDK · Google
  10. NVM for Windowsد پروګرام ژبې او SDK · Ecor Ventures LLC

ټګونه

شریکول