Getting Started
Integrate FramePro into your codebase in minutes - simply add FramePro.cpp/h into your code and start adding scopes. Add timing scopes using the supplied macros to any function or block of code. FramePro will then track the time, thread and core of each scope. This scope information will be sent to the FramePro application, where thread and core utilization can be viewed for each frame.
Why FramePro?
FramePro has minimal overhead. When profiling, the first rule is to not change the behavior of what is being profiled. FramePro allows you to add thousands of timing scopes per frame with no noticeable impact on frame rate.
Profile in real-time. In interactive mode you can see the data as it is being recorded, easily spot a frame rate spike, and immediately zoom in to that frame to find the cause.
No limit to the length of a capture. Unlike many profilers which can only capture a few seconds worth of data, FramePro can capture long play sessions.
Framepro uses the highest resolution timer available on your system. It is configured for many platforms and easily configurable.
FramePro is easy and intuitive to use. Everyone who sees FramePro in action immediately 'gets it'. FramePro can be used by programmers and non-programmers alike.
How it works
Call the FRAMEPRO_FRAME_START() macro at the start of your frame. This tells FramePro when the frame starts and ends and this will be marked on the timeline in both the thread and code view. This simple feature is one which many profilers lack.
Use the FRAMEPRO_SCOPE() macro to time a function call. This creates an object on the stack that records information. In its constructor it records the start time using the high resolution system timer. In its destructor it records the end time, the current thread id, the current CPU core, and the current function name. This information is then copied onto a thread local storage (TLS) buffer. These TLS buffers are sent once a frame on a separate thread.
The scope recording code is minimal and consists of only a few instructions. The thread local storage means that there is no locking or contention with other threads. The function name string is a string literal, and the only value that is sent to FramePro is the pointer. The actual string value is resolved later. All this means that there are only a few instruction per scope, and only a few bytes of data is copied to the send buffer. this allows you to add thousands of scopes per frame without affecting frame rate.
There are a number of different scope macros. If you want to name a scope use FRAMEPRO_NAMED_SCOPE("MyScope"). You can also send dynamic (non-literal) strings using FRAMEPRO_DYNAMIC_SCOPE(). to scope idle processor time, such as in an event wait, use FRAMEPRO_IDLE_SCOPE(). This will show up in a different colour in FramePro. Use the conditional scopes to only show the scope if it is longer than a specified time. This time can be dynamically changed in FramePro while recording. The scope macros are fully documented in FramePro.h.
FramePro can run in connected or offline mode. When running in connected mode your application will send data using sockets every frame. FramePro will then display the data as it is received. You can pause the data and inspect frames at any time while recording. If you don't want the overhead of FramePro on your system you can run in non-interactive mode and it will take up almost no CPU. This is useful when profiling on the same PC as you are running the application. For best results, it is recommended that you run your application/game on a different PC or Console and then connect in interactive mode.
If your codebase doesn't support sockets or you can't connect for some other reason you can run FramePro in offline mode and all network data will be written to a .framepro_dump file. This file can then be loaded into framepro.
Opis izdavača (engleski)
Šta je FramePro?
Program FramePro je vlasnički softver za Windows zatvorenog koda u kategoriji „Pomoćni alati za programere“. Objavljuje ga PureDev Software.
Instalacija i sistemski zahtevi
Izdavač nudi instalacione fajlove tipa EXE (WiX Burn) za sisteme 64-bit. Za instalaciju su potrebna administratorska prava. Tiha instalacija je moguća uz dokumentovane parametre instalacionog fajla.
Popularnost i tipovi fajlova
U Windowsu program registruje 1 tip fajla, među njima .framepro. Slični programi: WinMerge, jq i x64dbg.
Prednosti / Nedostaci
Prednosti
- Dokumentovana tiha instalacija
Nedostaci
- Vlasnička licenca: uslove i cenu treba proveriti
- Nema izvorne ARM64 verzije
- Za instalaciju su potrebna administratorska prava
Ukratko: FramePro je program za Windows (kategorija „Pomoćni alati za programere“), dostupan za 64-bit. Administratori ga mogu distribuirati bez učešća korisnika.
Da li je preuzimanje programa FramePro bezbedno?
- Fajl se preuzima sa domena izdavača (puredevsoftware.com)
- Link za preuzimanje koristi HTTPS
- Objavljen je SHA256 heš, pa se fajl može proveriti:
7EC28A1EA8267494243D08C52D082E3B4DC1CFF64A0B16B8A3894758E7209727· Otvori VirusTotal izveštaj za ovaj heš - Pri poslednjoj proveri link je odgovorio (22. oktobar 2026.)
- ExeAtlas ne čuva, ne pakuje u omotače i ne menja instalacione fajlove
Povezano uputstvo: Kako proveriti SHA256 heš fajla na Windowsu
Najnovije verzije
Sve verzije (1) ›| Verzija | Datum | Veličina | Fajlovi |
|---|---|---|---|
| 1.12.1.0Najnovija | 5. maj 2026. | — | 64-bit EXE (WiX Burn) |
Instalacija iz komandne linije
Tiha instalacija ›winget install --id PureDevSoftware.FramePro -edownload.php /quiet /norestartmsiexec /x {45B41328-DE80-430A-9FF2-FEA12D14BD1B} /qn /norestartPovezano uputstvo: Kako koristiti winget: instalacija i ažuriranje
Informacije
- Izdavač
- PureDev Software
- Kategorija
- Pomoćni alati za programere
- Licenca
- Proprietary
- Cena
- Pogledajte sajt izdavača
- Zahtevi
- Windows 11 / 10
- Arhitektura
- 64-bit
- Instalacioni fajl
- EXE (WiX Burn)
- Verzija
- 1.12.1.0
- Objavljeno
- 5. maj 2026.
- Dodato u katalog
- 2. jun 2026.
- Broj verzija
- 1
- Veb-sajt
- puredevsoftware.com
- winget ID
- PureDevSoftware.FramePro
- MSI kod proizvoda
- {45b41328-de80-430a-9ff2-fea12d14bd1b}
Koje fajlove otvara (1)
Ocene i recenzije
Još nema recenzija. Ocenu možete ostaviti prvi.
Alternative za program FramePro
Prikaži sve ›-
Otvoreni kod1,2 mil. ↓ -
Otvoreni kod5,1 mil. ↓ -
Otvoreni kod95,8 hilj. ↓ -
Otvoreni kod10,5 hilj. ↓ -
Otvoreni kod18,8 hilj. ↓ -
Otvoreni kod15,7 hilj. ↓ -
Otvoreni kod28,3 hilj. ↓ -
Otvoreni kod40,7 hilj. ↓
Česta pitanja
Da li je program FramePro besplatan?
FramePro je vlasnički softver zatvorenog koda (licenca: Proprietary). Da li se plaća, zavisi od izdanja: cene i besplatne varijante proverite na sajtu izdavača.
Da li je preuzimanje programa FramePro bezbedno?
Fajl se preuzima sa domena puredevsoftware.com, koji pripada izdavaču; ExeAtlas fajl ne čuva i ne menja. Uporedite SHA256 heš preuzetog fajla sa onim na ovoj stranici ili otvorite VirusTotal izveštaj za taj heš.
Kako instalirati FramePro preko wingeta?
Otvorite PowerShell ili Windows Terminal i pokrenite winget komandu sa ove stranice. winget preuzima zvanični instalacioni fajl i pre pokretanja proverava njegov SHA256 heš.
Može li se FramePro instalirati tiho?
Da. Na stranici o tihoj instalaciji navedena je tačna komanda za svaki instalacioni fajl.
Da li FramePro radi na ARM procesorima (Windows on Arm)?
ARM64 verzija ne postoji; Windows 11 on Arm može da pokrene verziju 64-bit putem emulacije.
Koje su alternative za program FramePro?
WinMerge, jq, x64dbg, Biome i delta. Poređenje se nalazi na stranici sa alternativama.
