Getting Started
Integrate FramePro into your codebase in minutes - simply add FramePro.cpp/h into your code and start adding scopes. Add timing scopes using the supplied macros to any function or block of code. FramePro will then track the time, thread and core of each scope. This scope information will be sent to the FramePro application, where thread and core utilization can be viewed for each frame.
Why FramePro?
FramePro has minimal overhead. When profiling, the first rule is to not change the behavior of what is being profiled. FramePro allows you to add thousands of timing scopes per frame with no noticeable impact on frame rate.
Profile in real-time. In interactive mode you can see the data as it is being recorded, easily spot a frame rate spike, and immediately zoom in to that frame to find the cause.
No limit to the length of a capture. Unlike many profilers which can only capture a few seconds worth of data, FramePro can capture long play sessions.
Framepro uses the highest resolution timer available on your system. It is configured for many platforms and easily configurable.
FramePro is easy and intuitive to use. Everyone who sees FramePro in action immediately 'gets it'. FramePro can be used by programmers and non-programmers alike.
How it works
Call the FRAMEPRO_FRAME_START() macro at the start of your frame. This tells FramePro when the frame starts and ends and this will be marked on the timeline in both the thread and code view. This simple feature is one which many profilers lack.
Use the FRAMEPRO_SCOPE() macro to time a function call. This creates an object on the stack that records information. In its constructor it records the start time using the high resolution system timer. In its destructor it records the end time, the current thread id, the current CPU core, and the current function name. This information is then copied onto a thread local storage (TLS) buffer. These TLS buffers are sent once a frame on a separate thread.
The scope recording code is minimal and consists of only a few instructions. The thread local storage means that there is no locking or contention with other threads. The function name string is a string literal, and the only value that is sent to FramePro is the pointer. The actual string value is resolved later. All this means that there are only a few instruction per scope, and only a few bytes of data is copied to the send buffer. this allows you to add thousands of scopes per frame without affecting frame rate.
There are a number of different scope macros. If you want to name a scope use FRAMEPRO_NAMED_SCOPE("MyScope"). You can also send dynamic (non-literal) strings using FRAMEPRO_DYNAMIC_SCOPE(). to scope idle processor time, such as in an event wait, use FRAMEPRO_IDLE_SCOPE(). This will show up in a different colour in FramePro. Use the conditional scopes to only show the scope if it is longer than a specified time. This time can be dynamically changed in FramePro while recording. The scope macros are fully documented in FramePro.h.
FramePro can run in connected or offline mode. When running in connected mode your application will send data using sockets every frame. FramePro will then display the data as it is received. You can pause the data and inspect frames at any time while recording. If you don't want the overhead of FramePro on your system you can run in non-interactive mode and it will take up almost no CPU. This is useful when profiling on the same PC as you are running the application. For best results, it is recommended that you run your application/game on a different PC or Console and then connect in interactive mode.
If your codebase doesn't support sockets or you can't connect for some other reason you can run FramePro in offline mode and all network data will be written to a .framepro_dump file. This file can then be loaded into framepro.
Udgiverens beskrivelse (engelsk)
Hvad er FramePro?
FramePro fra PureDev Software er proprietær software til Windows (kategori: Hjælpeværktøjer til udviklere).
Installation og systemkrav
Udgiveren tilbyder installationsfiler til 64-bit (EXE (WiX Burn)). Installationen kræver administratorrettigheder. Med installationsfilens dokumenterede parametre kan programmet installeres lydløst.
Popularitet og filtyper
I Windows registrerer programmet én filtype, blandt andet .framepro. Lignende programmer er for eksempel WinMerge, jq og x64dbg.
Fordele / Ulemper
Fordele
- Dokumenteret lydløs installation
Ulemper
- Proprietær licens: tjek vilkår og pris
- Ingen indbygget ARM64-version
- Installationen kræver administratorrettigheder
Kort sagt: FramePro er et værktøj i kategorien Hjælpeværktøjer til udviklere til pc’er med 64-bit. Administratorer kan udrulle det uovervåget.
Er det sikkert at downloade FramePro?
- Filen leveres af puredevsoftware.com, udgiverens eget domæne
- Downloadlinket bruger HTTPS
- Der er offentliggjort en SHA256-hash, så du kan kontrollere filen:
7EC28A1EA8267494243D08C52D082E3B4DC1CFF64A0B16B8A3894758E7209727· Åbn VirusTotal-rapporten for denne hash - Linket svarede ved seneste kontrol (22. oktober 2026)
- ExeAtlas hoster, indpakker eller ændrer ikke installationsfiler
Relateret vejledning: Sådan tjekker du en fils SHA256-hash i Windows
Nyeste versioner
Alle 1 versioner ›| Version | Dato | Størrelse | Filer |
|---|---|---|---|
| 1.12.1.0Nyeste | 5. maj 2026 | — | 64-bit EXE (WiX Burn) |
Installér fra kommandolinjen
Lydløs installation ›winget install --id PureDevSoftware.FramePro -edownload.php /quiet /norestartmsiexec /x {45B41328-DE80-430A-9FF2-FEA12D14BD1B} /qn /norestartRelateret vejledning: winget: installer og opdater programmer i Windows
Information
- Udgiver
- PureDev Software
- Kategori
- Hjælpeværktøjer til udviklere
- Licens
- Proprietary
- Pris
- Se udgiverens websted
- Kræver
- Windows 11 / 10
- Arkitektur
- 64-bit
- Installationsfil
- EXE (WiX Burn)
- Version
- 1.12.1.0
- Udgivet
- 5. maj 2026
- I kataloget siden
- 2. juni 2026
- Registrerede versioner
- 1
- Websted
- puredevsoftware.com
- winget-id
- PureDevSoftware.FramePro
- MSI-produktkode
- {45b41328-de80-430a-9ff2-fea12d14bd1b}
Filtyper, som programmet åbner (1)
Bedømmelser og anmeldelser
Ingen anmeldelser endnu. Vær den første til at bedømme programmet.
Alternativer til FramePro
Se alle ›-
Open source1,2 mio. ↓ -
Open source5,1 mio. ↓ -
Open source95,8 t ↓ -
Open source10,5 t ↓ -
Open source18,8 t ↓ -
Open source15,7 t ↓ -
Open source28,3 t ↓ -
Open source40,7 t ↓
Ofte stillede spørgsmål
Er FramePro gratis?
FramePro er proprietær software (lukket kildekode), licens: Proprietary. Om det koster penge, afhænger af udgaven: priser og eventuelle gratis versioner står på udgiverens websted.
Er det sikkert at downloade FramePro?
Filen kommer fra puredevsoftware.com, som tilhører udgiveren; ExeAtlas hoster eller ændrer den ikke. Sammenlign filens SHA256-hash med den, der vises her, eller åbn VirusTotal-rapporten for hashen.
Hvordan installerer jeg FramePro med winget?
Åbn PowerShell eller Windows Terminal, og kør winget-kommandoen, der vises på denne side. winget downloader den officielle installationsfil og kontrollerer SHA256-hashen, før den køres.
Kan FramePro installeres lydløst?
Ja. Siden om lydløs installation viser den præcise kommando for hver installationsfil.
Kører FramePro på ARM (Windows on Arm)?
Der findes ingen ARM64-version; Windows 11 on Arm kan køre versionen til 64-bit via emulering.
Hvilke alternativer findes der til FramePro?
WinMerge, jq, x64dbg, Biome og delta. Siden med alternativer sammenligner dem.
