Priljubljeno: Podatki posodobljeni: 17. november 2026

Kategorije

Internet1416
Komunikacija328
Zvok in video938
Grafika in oblikovanje562
Pisarna in produktivnost1180
Orodja za razvijalce3283
Orodja UI607
Varnost in zasebnost407
Sistemska orodja3188
Igre543
Izobraževanje in znanost242
Omrežje in IT292

UVtools 4.2.4: prenos za Windows

MSLA/DLP, file analysis, calibration, repair, conversion and manipulation

PTRTECH 3D in CAD #9 3D in CAD
To je starejša različica. Najnovejša različica je 7.1.2. UVtools 7.1.2 · Izdano:

Namestitvene datoteke 4.2.4

ArhitekturaVrstaZa kogaVelikost datotekePrenesiSHA256
64-bitno MSI · en-US Vsi uporabniki — github.com VirusTotal

Povezava in SHA256 izhajata iz manifesta skupnosti Windows Package Manager. Pred zagonom primerjajte zgoščeno vrednost prenesene datoteke.

Opombe ob izdaji

- Setting - MaxDegreeOfParallelism:
- (Add) Value -2: Will utilize an optimal number in order to relief some load and therefore preventing the computer from lags and freezes, mostly this is the processor core count less a few.
The more cores the CPU haves the larger is the margin up to a limit. (Optimal/Recommended)
- (Add) Value 0: Will utilize the processor core count. (Fast/Performance).
Note that 0 is only equal to Max if you don't change your CPU or translate settings to other machine.
- (Change) ! preset will set the value as would the -2 in the runtime.
However it's recommended to use -2 instead of the fixed positive number
- (Change) Default value from -1 to -2 (For current users is recommended to change to -2)
- Tool - Stir resin:
- (Add) Option to output a dummy pixel
- (Add) Exposure time setting to allow to set the time of layer exposure
- (Add) Informative text warning about the fact that each stir will increase in height due no ability to run layers in same Z position
- (Add) Tooltips on the labels
- (Improvement) Always allow the tool to run even if applied before
- (Improvement) Do not allow to run the tool when stir number multiplied by layer height pass the set lift height when running on printers with no ability to run layers in same Z position
- (Improvement) Instead of grey out incompatible fields, hide them and show the text (Incompatible with the current printer / file format)
- (Add) Benchmark tool: Allow to change thread count for the multi-thread test

https://github.com/sn4k3/UVtools/releases/tag/v4.2.4

Najbolj priljubljeno v kategoriji „3D in CAD“

Prikaži vse
  1. PrusaSlicer3D in CAD · Prusa Research
  2. Ultimaker Cura3D in CAD · UltiMaker
  3. MeshLab3D in CAD · Paolo Cignoni - VCG - ISTI - CNR
  4. OpenToonz3D in CAD · DWANGO Co., Ltd.
  5. Bambu Studio3D in CAD · Bambulab
  6. UVtools3D in CAD · PTRTECH
  7. NetLogo3D in CAD · CCL
  8. OpenModelica3D in CAD · Open Source Modelica Consortium (OSMC) and Linköping University (LiU).
  9. Slicer3D in CAD · slicer.org
  10. SolveSpace3D in CAD · SolveSpace

Več programov izdajatelja PTRTECH

Prikaži vse
  • NetSonarNadzor in preizkusi zmogljivosti · PTRTECH

Oznake

Deli