이전 버전입니다. 현재 최신 버전은 7.1.2입니다. UVtools 7.1.2 · 출시일:
설치 파일 4.2.4
| 아키텍처 | 형식 | 설치 범위 | 파일 크기 | 다운로드 | SHA256 |
|---|---|---|---|---|---|
| 64비트 | MSI · en-US | 모든 사용자 | — | github.com | VirusTotal |
링크와 SHA256은 Windows 패키지 관리자 커뮤니티 매니페스트에서 가져왔습니다. 실행하기 전에 다운로드한 파일의 해시를 비교해 보십시오.
릴리스 노트
- Setting - MaxDegreeOfParallelism:
- (Add) Value -2: Will utilize an optimal number in order to relief some load and therefore preventing the computer from lags and freezes, mostly this is the processor core count less a few.
The more cores the CPU haves the larger is the margin up to a limit. (Optimal/Recommended)
- (Add) Value 0: Will utilize the processor core count. (Fast/Performance).
Note that 0 is only equal to Max if you don't change your CPU or translate settings to other machine.
- (Change) ! preset will set the value as would the -2 in the runtime.
However it's recommended to use -2 instead of the fixed positive number
- (Change) Default value from -1 to -2 (For current users is recommended to change to -2)
- Tool - Stir resin:
- (Add) Option to output a dummy pixel
- (Add) Exposure time setting to allow to set the time of layer exposure
- (Add) Informative text warning about the fact that each stir will increase in height due no ability to run layers in same Z position
- (Add) Tooltips on the labels
- (Improvement) Always allow the tool to run even if applied before
- (Improvement) Do not allow to run the tool when stir number multiplied by layer height pass the set lift height when running on printers with no ability to run layers in same Z position
- (Improvement) Instead of grey out incompatible fields, hide them and show the text (Incompatible with the current printer / file format)
- (Add) Benchmark tool: Allow to change thread count for the multi-thread test
