FreeDV: baixar versions anteriors

Bugfixes:
- Hamlib: Allow two timeouts during connection process to allow Icom marine radios to behave better. (PR #1369, #1388)
- Rename sanitizers.h->freedv_sanitizers.h due to name conflicts. (PR #1372)
- Fix intermittent non-response to short PTT clicks to stop TX. (PR #1375) - thanks @barjac!
- Revert to libsamplerate library to fix remaining audio quality issues. (PR #1379)
- Right-justify SNR column in FreeDV Reporter to improve appearance. (PR #1387) - thanks @barjac!
- Hamlib: Set frequency again on mode changes. (PR #1395)
- Consolidate EOO length calculation in freedv-backend to improve callsign decode reliability. (PR #1402)
- Hamlib: Switch off memory channel before setting frequency/mode. (PR #1403) - thanks @barjac!
- Hamlib/OmniRig: Round received frequency to nearest 100 Hz. (PR #1373)
- Tighten remaining audio settings to improve audio drops. (PR #1412)
- Fix corruption of string config arrays containing commas. (PR #1417) - thanks @barjac!
- Suppress button flicker in Linux light themes. (PR #1419, PR #1421) - thanks @barjac!
- Only preserve previously selected tab on TX if it's in the same group as 'From Mic'. (PR #1428)
- Scalar plot label alignment fix for Y axis of Frm Decoder/Mic/Radio, SNR and Spectrum plots. (PR #1429) - thanks @barjac!
- Fix window position restore under KWin and labwc (main window + FreeDV Reporter window). (PR #1431, #1433, #1449, #1450) - thanks @barjac!
- Harden experimental tab layout persistence. (PR #1434) - thanks @barjac!
- Fix right-click context menus dismissing before they can be read (GTK). (PR #1437) - thanks @barjac!
- Unconditionally add new station to Heard Station list if first heard. (PR #1444)
- Fix heard‑stations callsign combo stuck‑highlight, right‑click behaviour, and a stale‑index crash. (PR #1448) - thanks @barjac!
- Fix crash and long hang on main window close with an unresponsive rig. (PR #1452) - thanks @barjac!
- Fix Radio Frequency coloring on dark/light mode transition. (PR #1453)
- Fix FreeDV Reporter column‑order corruption and Last TX column width. (PR #1458) - thanks @barjac!
- Fix waterfall/spectrum filling solid colour during half‑duplex TX. (PR #1462) - thanks @barjac!
- Windows/macOS: Zero audio on startup. (PR #1463)
- Fix issue causing TX thread to use more CPU time than expected with no audio available. (PR #1465)

Enhancements:
- Add UDP broadcast of received callsigns. (PR #1367)
- Add Time‑Out Timer (TOT) capability to FreeDV. (PR #1366, #1398, #1405) - thanks @barjac!
- Load last‑used config file on restarts. (PR #1365, #1371)
- Add "Set tune output to minimum" to Tune button context menu for safety. (PR #1378) - thanks @barjac!
- Move Tune button into Control widget for improved usability. (PR #1377) - thanks @barjac!
- Restore heard station list on launch. (PR #1358) - thanks @barjac!
- Add momentary PTT option to FreeDV. (PR #1393)
- Allow 8 k sample rate for 'radio' devices. (PR #1416)
- FreeDV Reporter: Connect to server via TLS by default. (PR #1422, #1427)
- Block special characters in recording file name suffixes and default the voice keyer file selector to show .wav and .mp3. (PR #1424) - thanks @barjac!
- Fix Voice Keyer/PTT context menu positioning under native Wayland. (PR #1438) - thanks @barjac!
- Automatically start decoding on FreeDV startup. (PR #1436)
- Remove "Clip" indicator from main window to reduce confusion. (PR #1461)

Build system:
- Clear CMake deprecation warnings in FreeDV. (PR #1383, #1386)
- Upgrade Hamlib to 4.7.2. (PR #1413)
- Update wxWidgets to 3.3.3. (PR #1439)
- Require C++20 to build FreeDV. (PR #1440)
- Enable LTO/PGO for macOS .app build. (PR #1456)
- Enable PGO for Windows builds. (PR #1457)
- Add support for CCache. (PR #1328)

Other:
- FlexRadio/KA9Q integrations moved to freedv‑integrations repo. (PR #1368)
- Improve tab save/load behavior on systems with wxWidgets 3.3+. (PR #1435)

Note: For users with “Enable Experimental Features” turned on, the way that displayed tabs are saved and restored

Bugfixes:
- Fix TX/tune level context menus on Linux distros using wxWidgets <= 3.2. (PR #1333) - thanks @barjac!
- Fix audio routing problems on Windows due to hardware offloading. (PR #1335)
- Hamlib: Detect empty rig name on start. (PR #1339, #1351) - thanks @barjac!
- Fix missing Hamlib defines when building from source (PR #1353) - thanks @barjac!
- FreeDV Reporter: Fix issue preventing mode changes on double-click. (PR #1343)
- Fix compiler warning/error in EventHandler when using GCC 16.1. (PR #1347)
- Improve Flex waveform RX audio quality. (PR #1338, #1348, 1356)
- Flex: Use version number without Git hash for waveform registration. (PR #1359)
- Fix intermittent CSV logging corruption. (PR #1361)
- Hamlib: Fix bug preventing frequency change after changing on the radio. (PR #1363)
- KA9Q: Remove custom AppRun script causing audio distortion. (PR #1364)

Enhancements:
- Allow use of a custom key for PTT. (PR #1309)
- Improve Reporter message list usability. (PR #1310) - thanks @barjac!
- Clarify Reporter on/off tooltip. (PR #1345)

FreeDV 2.3.0 has been released, including support for running it directly on a compatible Flex 8000 or Aurora series radio, enhancements to performance (thanks to the removal of Python) as well as improvements to FreeDV Reporter filtering functionality and other bug fixes. These changes are outlined below:
1. Bugfixes:
- Linux: fix semaphore wakeup timing to reduce audio dropouts. (PR #1220)
- FreeDV Reporter: Fix display issues on non-English systems. (PR #1217)
- Update audio device list in Easy Setup after opening advanced audio setup. (PR #1223)
- Easy Setup: Fix crash while displaying Hamlib error. (PR #1224)
- Force numpy to 2.3.x due to illegal instruction errors. (PR #1230)
- FreeDV Reporter: Disable autosizing enable/disable on Linux. (PR #1231)
- Improve reliability of Start/Stop and PTT buttons. (PR #1236)
- Hamlib: Reenable FLRig/rigctl timeouts. (PR #1233)
- Hamlib/OmniRig: Ignore frequency/mode query during TX. (PR #1246)
- Fix audio dropouts on Linux. (PR #1266)
- OmniRig: Use frequency from VFO if we get a zero frequency. (PR #1274)
- Fix bugs related to display of Mic/Speaker Level slider. (PR #1281) - thanks @barjac!
- Fix bug causing main window's menu to disappear when Reporter is displayed. (PR #1282)
- Flex: Prevent multiple slices from being in FreeDV mode. (PR #1270)
- Further improve audio dropouts. (PR #1287)
- FreeDV Reporter: Fix inability to use mouse wheel on Msg column. (PR #1289)
- Fix RADE related compiler errors. (PR #1299)
- Logging: fix incorrect time when using UTC due to DST. (PR #1302) - thanks @barjac!
- Ensure that PTT is actually off when opening Hamlib connection. (PR #1308)
- Fix race condition preventing frequency/mode from changing on start with SmartSDR 4.2. (PR #1314, #1320, #1321, #1322)
- Fix inability to open web browser in AppImages (e.g. when viewing callsign info). (PR #1326)
2. Enhancements:
- FreeDV Reporter: Use ItemsAdded/ItemsDeleted instead of Cleared() for performance. (PR #1212)
- Optimize "From XXX" plot performance. (PR #1238, #1239)
- Logging: Send WSJT-X 'Decode' message to indicate RX'd SNR. (PR #1248)
- Remove Python from RADE implementation to improve performance. (PR #1251)
- Add ability to hide self from FreeDV Reporter list. (PR #1260, #1278)
- Add Tune button to allow tuning antennas/rigs. (PR #1259, #1265, #1317, #1322)
- Add SNR plot to main window. (PR #1250, #1261)
- Bring back RX frequency indicator for RADE. (PR #1265, #1283)
- Improve usability of attenuation control in the main window. (PR #1268) - thanks @barjac!
- Use RNNoise for improved noise canceling during TX. (PR #1276, #1307)
- FreeDV Reporter: Add ability to filter based on individual columns. (PR #1285)
- Improve spectrum and waterfall plot appearance on small displays. (PR #1288) - thanks @barjac!
- Add optional per-band TX attenuation saving. (PR #1284, #1323) - thanks @barjac!
- Log heard callsigns to a CSV file. (PR #1290, #1293)
- Add ability to load and save different FreeDV configurations. (PR #1296)
- Hamlib: Add options to force RTS and DTR on. (PR #1292)
- Add recogniition of SmartSDR 4.2+ DAX devices to Easy Setup. (PR #1306)
- Easy Setup: Also emit audio tone through speakers. (PR #1033)
- Switch to r8brain for audio resampling. (PR #1307)
3. Build system:
- Update Python to 3.14.3. (PR #1221)
- Update Hamlib to 4.7.1. (PR #1226, #1314)
- Update wxWidgets to 3.3.2. (PR #1244)
- Flex: Update Docker container version to match AppImage version. (PR #1256)
- Reenable Windows on ARM builds previously disabled in 2.0.0. (PR #1297, #1300)
- Add automated code signing support for Windows builds. (PR #1312)
4. Documentation:
- Update README instructions to reflect current Windows build steps. (PR #1232)
- Add OmniRig troubleshooting to the user manual. (PR #1264)
- Update FlexRadio waveform README to reflect SmartSDR 4.2 release. (PR #1311)
5. Other:
- Audio resampling logic consolidated in one location for ease of maintenance. (PR #1286, #1307)
Available binary releases (click Asset

FreeDV 2.2.1 has been released, containing bugfixes for issues discovered since the release of 2.2.0 along with a change to ensure continued operation of the FlexRadio integration. These changes are outlined below:
1. Bugfixes:
- Fix UBSan/TSan errors from 2.2.0 build. (PR #1200, #1208)
- Fix compile error when trying to use Hamlib 5.0-git. (PR #1202)
- Fix bug causing PTT input to be initially ignored until pushing the PTT button. (PR #1203)
- FlexRadio: Fix command format for UDP port. (PR #1205; thanks @amcdermond!)
- Cache PTT response time to minimize first TX reporting issues. (PR #1207)
- Hamlib: Add checking prior to retrieving minimum/maximum baud rates. (PR #1209)
- Autosize columns in main window drop-down list. (PR #1213)
- PulseAudio/pipewire: Use fixed wait time between processing cycles. (PR #1216)
- Slow down waterfall display when waterfall is small (i.e. displayed with other plots). (PR #1216)
- FlexRadio: Terminate on SIGHUP to avoid hangs on exit. (PR #1214)
2. Build system:
- macOS: Fix dylibbundler call for compilation. (PR #1204)
- macOS: Add /Applications shortcut to generated DMG. (PR #1206)

FreeDV 2.2.0 has been released, containing bugfixes and feature enhancements, including integration with logging software and enhancements to the previously released FlexRadio integration. These changes are outlined below:
1. Bugfixes:
- Radio integrations:
- KA9Q: Need to divide read() rval with sizeof(short). (PR #1120)
- Flex/KA9Q: Only report to FreeDV Reporter if user is not hidden from former. (PR #1140)
- Flex: use poll() instead of select(). (PR #1143)
- Flex: use tanh() for audio limiting. (PR #1156)
- Flex/KA9Q: Fix problem preventing running of AppImages on Raspberry Pi OS/Debian bookworm. (PR #1158)
- Flex: set SO_REUSEADDR to allow NodeRed, etc. to work with the waveform. (PR #1161)
- Flex/KA9Q: Make sure each argument to AppImage is quote-escaped. (PR #1168)
- FreeDV Reporter:
- Left-align cardinal directions. (PR #1139)
- Defer row adds and removes until timer fires to reduce flicker. (PR #1162)
- Update VC Redistributable and suppress reboots during its installation. (PR #1102)
- Reduce RADE RX losses due to resampling. (PR #1094)
- Use same sample rate for both recording RX and TX. (PR #1107)
- Fix intermittent crash on FreeDV Reporter connection loss. (PR #1112, #1115, #1178)
- Suppress background for fake rightmost column. (PR #1116)
- Emit VOX tone only when PTT is enabled. (PR #1122)
- OmniRig: Fix crash when using Test button in CAT config dialog. (PR #1126)
- Fix hidden/clipped axis labels on plots. (PR #1110)
- Work around deadlock bug in tty0tty. (PR #1134) - thanks @barjac!
- Zero out waterfall when transmitting and not in full duplex. (PR #1136)
- Avoid data race when terminating application. (PR #1140)
- Fix issue saving frequency list on non-English systems. (PR #1152)
- Suspend PTT input changes while transitioning TX<->RX. (PR #1151)
- Fix memory corruption when stopping and starting different playback files. (PR #1157)
- Update unit test infrastructure to fix initial (within ~2-3s) RADE desyncs. (PR #1167)
- Windows: disable microphone check on start. (PR #1191)
- UdpHandler: fix crash when unable to resolve DNS. (PR #1193)
- Prevent reset of FreeDV Reporter connection while running. (PR #1193)
- Disable UDP Reporting checkbox when running. (PR #1193)
- Fix waterfall rendering issue with multiple plots displayed at once. (PR #1193)
- Fix inconsistent behavior when selecting/deselecting rows from the main window drop-down list. (PR #1184)
- OmniRig: Don't suppresss frequency updates on initial connect. (PR #1184)
- Hamlib: increase timeout to 625ms. (PR #1195)
2. Enhancements:
- FlexRadio support:
- Report FreeDV SNR using SmartSDR Meter API. (PR #1119)
- Use random port for VITA socket after connect. (PR #1141)
- Allow Ctrl-C to clean up the waveform. (PR #1144, #1146, #1160) - thanks @arodland!
- Allow FreeDV Reporter parameters to be overridden via command line. (PR #1154)
- Add command line option to adjust RX volume. (PR #1159)
- Allow user-configurable spot timeout (default 10 minutes). (PR #1169)
- Report SNR in spots added to SmartSDR. (PR #1179)
- KA9Q/SDR support:
- Allow user message to be reported to FreeDV Reporter. (PR #1179)
- FreeDV Reporter:
- Allow columns to be rearranged and/or made invisible. (PR #1132)
- Sort empty user messages below non-empty ones. (PR #1105)
- Add idle filter. (PR #1142, #1180, #1183, #1189)
- Add right-click menu for callsign lookups. (PR #1171, #1185)
- Add filtered indicator to bottom of window. (PR #1166)
- Upgrade Python to 3.14.2. (PR #1109, #1118, #1124, #1174)
- Add support for BBWENet bandwidth expander for received RADE audio. (PR #1113)
- Reduce CPU usage rendering "scalar" plots (i.e. From Mic). (PR #1133)
- Linux: List /dev/rfcomm* serial devices when configuring. (PR #1106) - thanks @NespaLa!
- Hamlib: Allow selection of baud rates greater than 115200. (PR #1125)
- Add support for loggers that support the WSJT-X networking protocol. (PR #1129, #1153, #1184, #1196)
- Add support for recording decoded audio. (PR #1145, #1184)
- Display Hamlib 

FreeDV 2.1.0 has been released, containing bugfixes and feature enhancements, including experimental support for integrating FreeDV with SmartSDR (for Flex 6000, 8000 and Aurora series radios). These changes are outlined below:
1. Bugfixes:
- Clean up wxWidgets warnings in Audio Config window. (PR #1044)
- Fix CAT control and frequency formatting problems on non-English computers. (PR #1050)
- Clean up ThreadSanitizer warnings in codebase. (PR #1053)
- Clean up UndefinedBehaviorSanitizer warnings in codebase. (PR #1061)
- Divide displayed TX Attenuation level by 10 on startup. (PR #1060)
- Fix issue preventing FreeDV Reporter from properly being restored to the correct display. (PR #1055)
- Fix intermittent FreeDV Reporter related crash on Windows. (PR #1075)
- Update Visual C++ Redistributable to version 17 to resolve RADE startup crashes. (PR #1074)
- Reduce RADE RX losses due to resampling. (PR #1094)
2. Enhancements:
- Additional cleanup of code that runs in real-time. (PR #1039, #1068, #1077)
- Print error if one attempts to use a stereo WAV file instead of a mono one. (PR #1052)
- Hamlib: Add support for automatically displaying only the valid baud rates. (PR #1057)
- CPU reductions when rendering plots, especially on X11/Xwayland systems. (PR #1064)
- Add implementation of Flex waveform for Flex 6000/8000/Aurora series. (PR #1018, #1088)
- Add ka9q-radio integration for use with web-based SDRs and similar. (PR #1066)
- Support bulk updates from FreeDV Reporter server. (PR #1079)
- Hide Stats box by default. (PR #1081)
- Always allow frequency drop-down to be used, even if CAT and reporting are disabled. (PR #1080, #1093)
3. Build system:
- Add support for Thread/Undefined Behavior Sanitizer instrumentation on macOS and Linux builds. (PR #1075)
- Force all compiler warnings to be errors. (PR #1076)
- Enable clang-tidy scans on codebase. (PR #1086)
- Update CI process to enable automatic code signing of macOS and Linux builds. (PR #1078)
Additional notes:
- For Windows users, you may be asked to reboot your PC as the Visual C++ Redistributable has been updated for this release. For best results, please do so.
- The FlexRadio and KA9Q integrations are currently experimental and may contain undiscovered bugs. More information about these integrations can be found here.
Available binary releases (click Assets to expand the section and retrieve download links):
- FreeDV application:
- FreeDV-2.1.0-windows-x86_64.exe (64 bit Windows for Intel/AMD)
- FreeDV.dmg (ARM/Intel macOS, Big Sur/11.0 or later required)
- FreeDV-2.1.0-x86_64.AppImage (AppImage for Linux for Intel/AMD)
- FreeDV-2.1.0-aarch64.AppImage (AppImage for Linux for ARM systems, e.g. Raspberry Pi 5+)
- Experimental FreeDV integrations with radios:
- FreeDV-FlexRadio-2.1.0-aarch64.AppImage (AppImage for FlexRadio support, needs Raspberry Pi 4+)
- FreeDV-KA9Q-2.1.0-x86_64.AppImage (AppImage for web SDR support, Intel/AMD machines)
- FreeDV-KA9Q-2.1.0-aarch64.AppImage (AppImage for web SDR support, ARM machines)

This release contains the following content:- Bugfixes:
- Remove TX attenuation and squelch tooltips. (PR #717)
- Disable 800XA radio button when in RX Only mode. (PR #716)
Available binary releases:- FreeDV-1.9.9.2-windows-i686.exe (32 bit Windows for Intel/AMD)
- FreeDV-1.9.9.2-windows-x86_64.exe (64 bit Windows for Intel/AMD, recommended for most Windows PCs)
- FreeDV-1.9.9.2-windows-aarch64.exe (64 bit Windows for ARM)

This release fixes a Windows-only bug discovered in 1.9.9 that prevented startup of the application. Otherwise, the content of this release is the same as 1.9.9.Available binary releases:- FreeDV-1.9.9.1-windows-i686.exe (32 bit Windows for Intel/AMD)
- FreeDV-1.9.9.1-windows-x86_64.exe (64 bit Windows for Intel/AMD, recommended for most Windows PCs)
- FreeDV-1.9.9.1-windows-aarch64.exe (64 bit Windows for ARM)
- FreeDV.dmg (Intel/ARM universal binary for macOS)

This release contains the following content:- Bugfixes:- Prevent unnecessary recreation of resamplers in analog mode. (PR #661)
- Better handle high sample rate audio devices and those with >2 channels. (PR #668)
- Fix issue preventing errors from being displayed for issues involving the FreeDV->Speaker sound device. (PR #668)
- Fix issue resulting in incorrect audio device usage after validation failure if no valid default exists. (PR #668)
- Fix bug where PTT button background color doesn't change when toggling PTT via space bar. (PR #669)
- Fix bug where FreeDV crashes if only RX sound devices are configured with mic filters turned on. (PR #673)
- Fix Windows-specific off by one issue in FreeDV Reporter sorting code. (PR #681)

- Enhancements:- Add Frequency column to RX drop-down. (PR #663)
- Update tooltip for the free form text field to indicate that it's not covered by FEC. (PR #665)
- Enable use of space bar for PTT when in the FreeDV Reporter window. (PR #666)
- Move TX Mode column to left of Status in FreeDV Reporter window. (PR #670)
- Add heading column to FreeDV Reporter window. (PR #672, #675)
- Prevent FreeDV Reporter window from being above the main window. (PR #679)
- Add support for displaying cardinal directions instead of headings. (PR #685)

- Code cleanup:- Move FreeDV Reporter dialog code to dialogs section of codebase. (PR #664)

Available binary releases:- FreeDV-1.9.8-windows-i686.exe (32 bit Windows for Intel/AMD)
- FreeDV-1.9.8-windows-x86_64.exe (64 bit Windows for Intel/AMD, recommended for most Windows PCs)
- FreeDV-1.9.8-windows-aarch64.exe (64 bit Windows for ARM)
- FreeDV.dmg (Intel/ARM universal binary for macOS)

This release fixes what was supposed to be fixed in v1.9.7.1 (intermittent crash when enabling/using filters). Otherwise, this is equivalent to version 1.9.7.Available binary releases:- FreeDV-1.9.7.2-windows-i686.exe (32 bit Windows for Intel/AMD)
- FreeDV-1.9.7.2-windows-x86_64.exe (64 bit Windows for Intel/AMD, recommended for most Windows PCs)
- FreeDV-1.9.7.2-windows-aarch64.exe (64 bit Windows for ARM)
- FreeDV.dmg (Intel/ARM universal binary for macOS)

This release contains a fix for an intermittent crash discovered after v1.9.7 was released involving changes in the TX/RX filters. Otherwise, this is equivalent to version 1.9.7.Available binary releases:- FreeDV-1.9.7.1-windows-i686.exe (32 bit Windows for Intel/AMD)
- FreeDV-1.9.7.1-windows-x86_64.exe (64 bit Windows for Intel/AMD, recommended for most Windows PCs)
- FreeDV-1.9.7.1-windows-aarch64.exe (64 bit Windows for ARM)
- FreeDV.dmg (Intel/ARM universal binary for macOS)

This release contains the following content:- Bugfixes:- Use double precision instead of float for loading frequency list. (PR #627)
- Improve validation of frequencies in Options dialog. (PR #628)
- Fix typo resulting in TX device sample rate being used for filter initialization. (PR #630)
- Fix intermittent crash resulting from object thread starting before object is fully initialized. (PR #630)
- Prevent creation of filters if not enabled. (PR #631)
- Fix issue preventing Start button from re-enabling itself on audio device errors. (PR #636)
- Fix issue preventing proper FreeDV Reporter column sizing on Windows. (PR #638)
- Fix flicker in FreeDV Reporter window when tracking by frequency. (PR #637)
- Update Filter dialog to better handle resizing. (PR #641)
- Fix capitalization of distance units in FreeDV Reporter window. (PR #642)
- Rename KHz to kHz in documentation and UI. (PR #643)
- Avoid calculating distances in FreeDV Reporter window for those with invalid grid squares. (PR #646, #649)
- Fix display bugs in FreeDV Reporter window when switching between dark and light mode. (PR #646)
- Add guard code to prevent FreeDV Reporter window from being off screen on startup. (PR #650)
- Fix issue preventing FreeDV startup on macOS <= 10.13. (PR #652)
- On startup, only jiggle height and not width. (PR #653)
- Fix issue preventing FreeDV from being linked with older versions of Xcode. (PR #654)
- Fix issue preventing TX audio from resuming after going from TX->RX in full duplex mode. (PR #655)

- Enhancements:- Allow user to refresh status message even if it hasn't been changed. (PR #632)
- Increase priority of status message highlight. (PR #632)
- Adjust FreeDV Reporter data display to better match accepted UX standards. (PR #644)
- Further reduce required space for each column in FreeDV Reporter window. (PR #646)
- Provide an option Do save only certain FreeDV Reporter messages sent to the server. (PR #647)

- Build system:- Include PDB debugging file for FreeDV. (PR #633)
- End support for 32 bit ARM on Windows. (PR #651)
- Begin performing CI builds for macOS. (PR #654)

- Documentation:- Fix spelling, etc. mistakes in the documentation. (PR #640)
- Update README to reflect latest state of codebase. (PR #654)
- Move older changelog from user manual to separate file. (PR #654)

- Code cleanup:- Move GUI related files into their own folder. (PR #654)
- Move build scripts into cmake folder. (PR #654)
- Remove no longer used scripts and patch files. (PR #654)

Available binary releases:- FreeDV-1.9.7-windows-i686.exe (32 bit Windows for Intel/AMD)
- FreeDV-1.9.7-windows-x86_64.exe (64 bit Windows for Intel/AMD, recommended for most Windows PCs)
- FreeDV-1.9.7-windows-aarch64.exe (64 bit Windows for ARM)
- FreeDV.dmg (Intel/ARM universal binary for macOS)

Merry Christmas! This release contains the following content:- Bugfixes:- Use SetSize/GetSize instead of SetClientSize/GetClientSize to work around startup sizing issue. (PR #611)
- Check for RIGCAPS_NOT_CONST in Hamlib 4.6. (PR #615)
- Make main screen gauges horizontal to work around sizing/layout issues. (PR #613)
- Fix compiler issue with certain versions of MinGW. (PR #622)
- Suppress use of space bar when in RX Only mode. (PR #623)
- Fix Windows-specific issue preventing entry of very high frequencies. (PR #624)

- Enhancements:- Add option to add a delay after starting TX and before ending TX. (PR #618)
- Allow serial PTT to be enabled along with OmniRig. (PR #619)
- Add 800XA to multi-RX list. (PR #617)
- Add logic to report status message to FreeDV Reporter. (PR #620)
- Allow display and entry of frequencies in KHz. (PR #621)
- Add 5368.5 KHz to the default frequency list. (PR #626)

Available binary releases:- FreeDV-1.9.6-windows-i686.exe (32 bit Windows for Intel/AMD)
- FreeDV-1.9.6-windows-x86_64.exe (64 bit Windows for Intel/AMD, recommended for most Windows PCs)
- FreeDV-1.9.6-windows-armv7.exe (32 bit Windows for ARM)
- FreeDV-1.9.6-windows-aarch64.exe (64 bit Windows for ARM)
- FreeDV.dmg (Intel/ARM universal binary for macOS)

This release contains the following content:- Bugfixes:- Fix bug preventing frequency updates from being properly suppressed when frequency control is in focus. (PR #585)
- Fix bug preventing 60 meter frequencies from using USB with DIGU/DIGL disabled. (PR #589)
- Additional fix for PR #561 to parse/format frequencies using current locale. (PR #595)
- Add entitlements to work around macOS Sonoma permissions bug. (PR #598)
- Fix bug preventing FreeDV Reporter window from closing after resetting configuration to defaults. (PR #593)
- Fix bug preventing reload of manually entered frequency on start. (PR #608)

- Enhancements:- FreeDV Reporter: Add support for filtering the exact frequency. (PR #596)
- Add confirmation dialog box before actually resetting configuration to defaults. (PR #593)
- Add ability to double-click FreeDV Reporter entries to change the radio's frequency. (PR #592)
- FreeDV Reporter: Add ability to force RX Only reporting in Tools->Options. (PR #599)
- Add new 160m/80m/40m calling frequencies for IARU R2. (PR #601)
- Add Help button to allow users to get help more easily. (PR #607)

- Build system:- Upgrade wxWidgets to 3.2.4. (PR #607)

- Other:- Report OS usage to FreeDV Reporter. (PR #606)

Available binary releases:- FreeDV-1.9.5-windows-i686.exe (32 bit Windows for Intel/AMD)
- FreeDV-1.9.5-windows-x86_64.exe (64 bit Windows for Intel/AMD, recommended for most Windows PCs)
- FreeDV-1.9.5-windows-armv7.exe (32 bit Windows for ARM)
- FreeDV-1.9.5-windows-aarch64.exe (64 bit Windows for ARM)
- FreeDV.dmg (Intel/ARM universal binary for macOS)

- Fix issue causing hanging while testing serial port PTT. (PR #577)
- Fix issue causing improper RX Only reporting when hamlib is disabled. (PR #579)
- Fix compiler error on some Linux installations. (PR #578)
- Fix issue causing error on startup after testing setup with Easy Setup. (PR #575)
- Fix issue preventing PSK Reporter from being enabled by default. (PR #575)
- Add experimental support for OmniRig to FreeDV. (PR #575)
- Note: This is only available on Windows.
- FreeDV-1.9.4-windows-i686.exe (32 bit Windows for Intel/AMD)
- FreeDV-1.9.4-windows-x86_64.exe (64 bit Windows for Intel/AMD, recommended for most Windows PCs)
- FreeDV-1.9.4-windows-armv7.exe (32 bit Windows for ARM)
- FreeDV-1.9.4-windows-aarch64.exe (64 bit Windows for ARM)
- FreeDV.dmg (Intel/ARM universal binary for macOS)

Build system:
Updates to reflect LPCNet decoupling from Codec2 (PR #274)
Bugfixes:
Add missed UI disable on startup for 2020B mode. (PR #279)
Fixed TX audio dropouts when using different sample rates. (PR #287)
Remove sample rates above 48K from audio configuration. (PR #288)
Enhancements:
Add alternate method of determining 2020 support for non-x86 machines. (PR #280)
Remove unnecessary BW and DPSK options from UI. (PR #283)
Stats on left hand side of main window now auto-reset after user-configurable time period (default 10s). (PR #262, #286)