ideaMaker: скачать старые версии

- Direct Model Dragging: Models can now be moved by dragging them directly in the 3D viewport without entering Move mode. Wipe towers can also be dragged directly.
- Accurate Arrange Mode: Added an "Optimization" option to the Fast/Accurate dropdown in the Position panel for auto-arrangement, based on no-fit-polygon (NFP) packing for tighter results. Assemblies (groups) and IDEX duplication/mirror modes are supported.
- Support Bridge Layers: Added a Support Bridge Layers setting (Dense Support tab). Support bridges now use the support extruder and are interleaved with sparse supports in the output order.
- Wipe and Z-Hop Enhancements: Spiral z-hop is now supported in the print end segment. Retraction during wipe is now applied per-polygon to top surfaces, bottom surfaces, and narrow solid fills.
- Preview: Added a second nozzle indicator to the gcode preview in duplication/mirror mode.
- Annealing: Added an annealing phase after printing, with annealing time included in the estimated print report.
- Nitrogen Protection during Cooling: Added an option to keep nitrogen protection enabled during the post-print cooling stage in nitrogen mode.
- Material Appearance View: Replaced Realistic View with Material Appearance View, a new surface rendering mode that uses material appearance colors for powders.
- Packing Mode Protections: Transform tools are now correctly locked according to the current packing mode; models fixed in place cannot be moved, rotated, scaled, mirrored, or laid flat, and no longer prevent other models from being selected.

- Added separate settings for Inner Bridging Flowrate, Inner Bridging Speed, and Inner Bridging Extrusion Width Percentage to enable fine-grained control of internal vs. external bridge structures.
- Added support for alternating fill angles on support dense layers to improve support adhesion and stability.
- Assembly Support for Arrange and Sequential Printing.
- New Infill Type - Archimedean Chords.
- Infill Anchor: Added a sparse infill anchor line length setting.
- New Start Point Type - Aligned.
- Extended Shell Infill Order: Added two new options to Shell and Infill Order: "Inner/Outer/Inner -> Infill" and "Infill -> Inner/Outer/Inner".
- Support Painting Fill Mode - Overhang Only.
- Support nozzle and Raft/Skirt/Brim nozzles now support being set to "Not Specified".
- Travel paths have been split from one frame per path to one frame per step, enabling step-by-step animation playback and precise GCode line number positioning.
- Added a 3D nozzle model display and speed display in FFF preview.
- Refactored the SLS slicing algorithm, reducing peak memory to under 25% of previous versions.
- Overall SLS slicing time reduced to under 40% of previous versions.
- Significant speedup when arranging identical models.
- Optimized the 3D packing algorithm, reducing peak memory by over 30%.
- Significantly reduces computation time when using the Balanced packing strategy.

- Improved bridging detection that the inner solid fill region above sparse infill will be printed with the bridging settings.
- Improved brim generation when slicing models with single surface mode.
- Add new profiles for E3 0.6mm nozzle.
- Add new profiles for E3 0.4 mm nozzle: Hyper Speed PET CF, Hyper Speed PETG CF, PPS CF.
- Add new profiles for Pro3 HS series 0.6mm nozzle: Hyper Core PPA CF25, Hyper Speed PET CF.
- Add new resin materials: Henkel LOCTITE 3D MED3394 Black, Henkel LOCTITE 3D MED3394 White.
- Improved resin profile for Raise3D DF2+: Standard Black V1, High Clear V1, Standard White V1, Rigid 3K Grey V1.

- Add new ORP resin materials: RESIONE Tough TH72 (Matte), RESIONE Tough (Wear-resistant) K+, RESIONE Anti-impact (Ultra-tough), Henkel LOCTITE 3D PRO9317 Clear, Henkel LOCTITE 3D IND249 Black.
- Fixed an issue where XY Size Compensation does not work properly.
- Fixed an issue where some parts may be missing on certain models when loading STEP files.

- Improved the tree support generation when using per-group settings.
- Reduced the memory consumption of support painting operations.
- Improved the gap filling algorithm to reduce the processing time.
- Improved the slicing algorithm to avoid contours missing on some parts of the models.
- Improved profiles for Hyper Core PPA CF, Hyper Core PPA GF and Hyper Core ABS CF materials for the Raise3D Pro3 HS Series.
- Improved profiles for Premium PLA and Premium ABS materials for the Raise3D Pro3 Series with Hyper Speed Kit.
- Add new ORP resin materials: Henkel LOCTITE 3D IND147 Black, Henkel LOCTITE 3D IND403 Black, Henkel LOCTITE 3D IND5714 Gray.