worktrunk v0.63.0 다운로드

Release Notes
Improved
- [list] columns can force a column on past --full: Listing a column now overrides the --full / [list] summary presets — columns = ["branch", "ci"] shows the CI column without --full. Hard data-source prerequisites still apply: a listed summary with no [commit.generation] command, or url with no template, stays hidden, since listing can't conjure data that isn't configured. (#3295)
- Alt-r in the picker refreshes the preview panes, not just the rows: Alt-r re-collected the rows but kept serving cached preview content, so editing a tracked file and refreshing still showed the pre-edit diff. It now clears the preview cache too, recomputing the working-tree / log / branch-diff / upstream / summary tabs and re-fetching pr / comments. Unchanged branches re-read from the content-keyed on-disk cache, so only genuinely changed content pays a recompute. (#3293)
- A narrowed wt list is now actually faster: A narrowed [list] columns selection (e.g. ["branch", "path"]) now runs only the git work its columns need. It previously ran every per-worktree git status, diff, and ahead/behind walk regardless, then discarded the unselected results — so a trimmed view was no faster than the full table, and on a repo with many dirty worktrees that discarded work was the bulk of the wall-clock cost. (#3274, thanks @jtaby for reporting)
- Fewer duplicate git calls in wt list --full: The two integration probes per row (the conflict bit for main-state and the clean-merge tree for the integration column) issued a byte-identical git merge-tree, and the shared default-branch tip was peeled to its tree once per row. Both are now deduplicated through the in-memory cache, so each resolves once per run instead of once per worktree. (#3288, #3289)
- Picker comments tab avoids redundant forge fetches: The picker's comments preview tab gained an on-disk cache keyed by the PR's updatedAt (which rides for free on the CI fetch the picker already makes), so a repeat wt switch skips the per-row gh pr view --json comments fetch when the thread is unchanged and paints the tab instantly instead of showing "Loading comments…". The cache is also primed from the gh pr list call the picker already makes, so the tab skips its own fetch even on a session's first open (including PRs with no comments). GitHub only. (#3294, #3299)
- Statusline width comes from COLUMNS, not a parent-process walk: wt list statusline used to spawn up to 10 ps calls plus stty per render to recover a terminal width, because Claude Code piped the subprocess with no inherited TTY. Claude Code now sets COLUMNS/LINES to the terminal dimensions before running the script (since v2.1.153), so the width comes straight from there — less a fixed 5-column margin for Claude Code's own UI — and the ps/stty walk is gone. On an older Claude Code that doesn't set COLUMNS, the line renders untruncated rather than walking the process tree. (#3286, closes #2950)
Fixed
- wt list diff and ahead/behind columns use the upstream default tip: The main↕ (ahead/behind) and main…± (diff) columns measured every branch against the local default-branch tip, so in a fork whose local main lagged its upstream they reported inflated counts — one fork branch showed ↑44 and +∞ / -5K when it was ~2 commits past the real upstream tip. They now diff against the same upstream-aware base the integration column already uses. (#3280)
- Integrated branches no longer flash ✗ in wt list: A squash-merged branch whose default branch later re-edited the same lines showed ✗ (would-conflict), even though wt step prune classified it as ⊂ (fully integrated) and removed it. The list now ranks the integration verdict above the downstream conflict, matching prune; a genuinely un-integrated conflict still shows ✗. (#3278)
- wt list divergence-overflow marker uses one emphasis level: When an ahead/behind count overflows its digit budget, the main↕ column's compact C/K/∞ marker rendered the "behind" subcolumn as dim + bold (reading as bold red) instead of a clean one-level step. It now steps exactly one level — dim red → normal red — matching the "ahead" subcolumn, across wt list and the picker. (#3303)
- Branch deletion on removal is atomic: wt remove and prune now delete a branch with a compare-and-swap (git update-ref -d <ref> <expected-sha>) against the SHA the integration check already read, closing the window where a branch whose tip moved in between (e.g. a hook landing a commit) could be deleted. Such a branch is now retained with a clear message and a wt remove -D <branch> recovery hint. This also unifies the previously divergent safe-delete paths; explicit force-delete still uses git branch -D. (#2903)
- wt list and picker Age/Message columns paint as soon as the commit batch lands: These columns carry no async task — their data arrives with the initial git log batch — but stayed on the · placeholder until some slower task happened to redraw the row, so the commit message lagged behind a cache-warm Summary preview. They now paint the moment the batch lands. (#3287)
- Picker Alt-x removal: no cursor flash, --prs rows preserved: Removing a row with Alt-x flashed the > pointer to the top of the list for a frame, and in --prs mode made the streamed PR/MR rows vanish until the next Alt-r. Removal is now a synchronous in-place pool resync: the cursor lands on the row that slid up with no flash, and the PR/MR rows survive. (#3268, #3275)
- Removable rows stay gray when selected in the picker: A safe-to-delete worktree (integrated, or clean and even with the default branch) renders its row gray, but the gray vanished under the selection highlight — exactly when you're about to act on it. The gray now survives selection (selected row only; wt list and unselected rows are unchanged). (#3267)
- Picker preview keeps its scroll when CI status arrives: Scrolling down a diff and waiting a couple of seconds snapped it back to the top when the live CI fetch landed and re-rendered the pane. The re-render is now precise — a tab re-runs only when its own content would actually change — so a CI update no longer throws away the scroll position of an unrelated tab. (#3292)
- Picker summary tab dims when there's nothing to summarize: The summary preview tab (5) stayed lit on a clean branch with no commits ahead, unlike the diff tabs (1/3/4), which dim once their diff is known empty. It now dims in concert with them once both the branch diff and working tree are known empty. (#3291)
- Picker default view keeps collect order: With no query typed, the wt switch picker reordered rows by where each name's last / falls, so slash-bearing branches (feature/…, perf/…) sank toward the bottom and intermixed with other row kinds. The default view now preserves collect order. (#3301)
- Picker branch-diff preview and summary use the upstream-aware base: Like the wt list columns above, the picker's branch-diff preview pane and the LLM branch summary diffed against the raw local default branch, so a fork whose local default lagged upstream made them describe dozens of already-merged commits. They now use the same upstream-aware comparison base. (#3305)
- Picker comment previews render fenced code blocks cleanly: A fenced code block inside a PR/MR comment rendered as a garbled double gutter in the wt switch comments preview — alternating bar/no-bar lines with broken alignment. The code block now renders without the nested gutter. (#3306)
- First-run hints show the config path wt actually loads from: The picker's disabled-summary tab and the commit-generation setup prompt hardcoded ~/.config/worktrunk/config.toml, so a user with --config, WORKTRUNK_CONFIG_PATH, or a non-default $XDG_CONFIG_HOME was told to edit a file wt never reads. Both now show the resolved path. (#3290, #3298)
Internal
- -vv trace and profiler accuracy: trace.log is now purely human-readable, with the machine-parseable [wt-trace] fields living only in trace.jsonl; and the performance profile's cache analysis no longer reports stdin-driven commands (LLM claude -p calls, git patch-id) as duplicate re-runs, since their real input isn't captured in the command string. (#3296, #3297)
Install worktrunk 0.63.0
Install prebuilt binaries via shell script
curl --proto '=https' --tlsv1.2 -LsSf https://github.com/max-sixty/worktrunk/releases/download/v0.63.0/worktrunk-installer.sh | sh && wt config shell install
Install prebuilt binaries via powershell script
powershell -ExecutionPolicy Bypass -c "irm https://github.com/max-sixty/worktrunk/releases/download/v0.63.0/worktrunk-installer.ps1 | iex"; git-wt config shell install
Install prebuilt binaries via Homebrew
brew install worktrunk && wt config shell install
Download worktrunk 0.63.0
────────────────────────────────────────────────┬───────────────────┬─────────────
File │Platform │Checksum
────────────────────────────────────────────────┼───────────────────┼─────────────
worktrunk-aarch64-apple-darwin.tar.xz │Apple Silicon macOS│checksum
────────────────────────────────────────────────┼───────────────────┼─────────────
worktrunk-x86_64-apple-darwin.tar.xz │Intel macOS │checksum
────────────────────────────────────────────────┼───────────────────┼─────────────
worktrunk-x86_64-pc-windows-msvc.zip │x64 Windows │checksum
────────────────────────────────────────────────┼───────────────────┼─────────────
worktrunk-aarch64-unknown-linux-musl.tar.xz │ARM64 MUSL Linux │checksum
────────────────────────────────────────────────┼───────────────────┼─────────────
worktrunk-x86_64-unknown-linux-musl.tar.xz │x64 MUSL Linux │checksum
────────────────────────────────────────────────┴───────────────────┴─────────────
Install via Cargo
cargo install worktrunk && wt config shell install
Install via Winget (Windows)
winget install max-sixty.worktrunk && git-wt config shell install
Install via AUR (Arch Linux)