CADCraft 이전 버전 및 전체 버전

What's Changed
- -ATTDEF at the command line: attribute modes, AFLAGS, and the text's prompts by @2ez4gcx in https://github.com/storytold/cadcraft/pull/2597
- -WBLOCK at the command line, as AutoCAD runs it by @2ez4gcx in https://github.com/storytold/cadcraft/pull/2594
- LEADER at the command line, as AutoCAD runs it by @2ez4gcx in https://github.com/storytold/cadcraft/pull/2596
- Thai text: stacked marks, Thai fonts first, MTEXT word wrap by @awillfox in https://github.com/storytold/cadcraft/pull/2591
- SAVEAS portableFonts: Windows fonts for Linux text style fonts by @Adiakys in https://github.com/storytold/cadcraft/pull/2576
- i18n(ar): translate 129 new strings, use the catalog's terms in 3 by @SoldierPePe in https://github.com/storytold/cadcraft/pull/2564
- U inside a LISP routine takes back the routine's last command by @2ez4gcx in https://github.com/storytold/cadcraft/pull/2610
- Read bearings and compass points as AutoCAD does by @2ez4gcx in https://github.com/storytold/cadcraft/pull/2590
- DXF/DWG: viewport frozen layers as group 331 (341 in an R2000 DXF) by @Adiakys in https://github.com/storytold/cadcraft/pull/2575
- DXF: escape carets in TEXT, ATTDEF, ATTRIB and DIMENSION strings by @Adiakys in https://github.com/storytold/cadcraft/pull/2574
- Persist QuickCalc history, variables and last answer by @campbellcody in https://github.com/storytold/cadcraft/pull/2572
- Hit tests don't lay out dashes: moving the mouse over a block stays smooth by @camperking in https://github.com/storytold/cadcraft/pull/2603
- DXF: link dimension sources to their associations (fixes #2221) by @SBaksa in https://github.com/storytold/cadcraft/pull/2589
- Plot: a layout's saved page setup is used by default (part of #2493) by @SBaksa in https://github.com/storytold/cadcraft/pull/2586
- OOPS: bring back the last erase, each object where it was by @2ez4gcx in https://github.com/storytold/cadcraft/pull/2605
- Polyface meshes stay one object through DXF and DWG by @Adiakys in https://github.com/storytold/cadcraft/pull/2600
- OOPS: bring back what -WBLOCK erased; keep the last erase through REFEDIT; the Block Editor by @2ez4gcx in https://github.com/storytold/cadcraft/pull/2625
- feat(engine): INSERT of a drawing file keeps an attribute definition's field by @andrewbrake in https://github.com/storytold/cadcraft/pull/2619
- Dynamic blocks: stretch the points inside the frame, as AutoCAD does by @2ez4gcx in https://github.com/storytold/cadcraft/pull/2627
- fix(it): correct Chamfer terminology by @starise in https://github.com/storytold/cadcraft/pull/2335
- fix(engine): WBLOCK writes only what the block or selection uses (#2423) by @austin62jake in https://github.com/storytold/cadcraft/pull/2621
- fix(io): a viewport looks at its view target plus its centre (#2492) by @austin62jake in https://github.com/storytold/cadcraft/pull/2508
- fix(io): a ByBlock plot style (group 380 = 1) is written and read (#2242) by @assamaral in https://github.com/storytold/cadcraft/pull/2566
- fix(io): a layout keeps its limits and paper image origin through a save (#2109) by @austin62jake in https://github.com/storytold/cadcraft/pull/2623
- fix(io): the paper viewport a save adds is the sheet at the layout's plot scale (#2108) by @austin62jake in https://github.com/storytold/cadcraft/pull/2624
- macOS: Quit (Cmd+Q), the Dock's Quit and logout ask to save unsaved drawings instead of discarding them (#2157) by @Elarionus in https://github.com/storytold/cadcraft/pull/2620
- fix(io): read drawings with many groups in linear time (#862) by @whaslbeck in https://github.com/storytold/cadcraft/pull/2645
- DWG save keeps OLE objects (OLE2FRAME): stop reporting them as not saved by @johndoecesko in https://github.com/storytold/cadcraft/pull/2582
- fix(fonts): single-line TEXT runs left to right, as AutoCAD lays it out (#2500) by @austin62jake in https://github.com/storytold/cadcraft/pull/2618
- Remember the main window's size, position and maximized state between sessions (#2595

What's Changed
- Migrate CADCraft to egui 0.37 by @skylartaylor in https://github.com/storytold/cadcraft/pull/2119
- craft-pdf and its PDF backends back at craft-libs 6e7f285 by @aiongg in https://github.com/storytold/cadcraft/pull/2147
- macOS menu choices and their shortcuts run at once by @aiongg in https://github.com/storytold/cadcraft/pull/2140
- "Save changes?" and Drawing Recovery appear at once by @aiongg in https://github.com/storytold/cadcraft/pull/2144
- refactor: explicit imports instead of wildcards (S2208, batch_09) by @dylanmtaylor in https://github.com/storytold/cadcraft/pull/2046
- Escape literal \U+ and \M+ backslashes in the DXF writer by @Silvertree2010 in https://github.com/storytold/cadcraft/pull/2050
- Ignore last vertex bulge in open Polyline::centroid by @Silvertree2010 in https://github.com/storytold/cadcraft/pull/2053
- Reject leading '+' in hex handle and colour parsing by @Silvertree2010 in https://github.com/storytold/cadcraft/pull/2067
- GETVAR CECOLOR reads back as text, as in AutoCAD (follow-up to #2014) by @marcoarnulfo in https://github.com/storytold/cadcraft/pull/2069
- Fix format_angle zeroing radians near a full turn at low precision by @Silvertree2010 in https://github.com/storytold/cadcraft/pull/2073
- A Fix on a derived point (a line's midpoint, an arc's end) holds the position it had before the edit by @marcoarnulfo in https://github.com/storytold/cadcraft/pull/2077
- Fix wcmatch returning nil for patterns with many '*' wildcards by @Silvertree2010 in https://github.com/storytold/cadcraft/pull/2078
- Constraints: an ellipse solution stored with its axes swapped or mirrored must still meet every constraint (an axis end by index does not) by @marcoarnulfo in https://github.com/storytold/cadcraft/pull/2082
- MCP: resend once when the app refuses a token read before --launch opened it by @marcoarnulfo in https://github.com/storytold/cadcraft/pull/2098
- Fall back to decimal for huge engineering-unit distances by @Silvertree2010 in https://github.com/storytold/cadcraft/pull/2114
- i18n(sv): translate 49 new strings by @kler in https://github.com/storytold/cadcraft/pull/2120
- fix: omit empty outlines in complex text shaping by @skylartaylor in https://github.com/storytold/cadcraft/pull/1960
- fix(ui): keep layout tabs stable when toggling Tool Sets by @jonascloud in https://github.com/storytold/cadcraft/pull/2008
- PLOTWINDOW: pick both corners even with ORTHO on by @nicholasgower in https://github.com/storytold/cadcraft/pull/1893
- In-place text editing accepts IME composition and commit by @nicholasgower in https://github.com/storytold/cadcraft/pull/1905
- Reject negative or out-of-range minutes/seconds in D'" angles by @Silvertree2010 in https://github.com/storytold/cadcraft/pull/2116
- Read the drawing's WIPEOUTFRAME from its WIPEOUTVARIABLES object by @asimfali in https://github.com/storytold/cadcraft/pull/908
- Keep associative-array parameters when an xref is loaded (#943) by @MarekSpodBiedry in https://github.com/storytold/cadcraft/pull/966
- Read dynamic block element tags from the entity's own xdata (#942) by @MarekSpodBiedry in https://github.com/storytold/cadcraft/pull/967
- Table commands reject a malformed handle instead of using the selected table (#934) by @MarekSpodBiedry in https://github.com/storytold/cadcraft/pull/970
- Region: test very long segments against every segment so no crossing is missed (#929) by @MarekSpodBiedry in https://github.com/storytold/cadcraft/pull/975
- Geometry: circle intersection judges tangency against the smaller circle, so a small circle crossing a huge one gives two points (#926) by @MarekSpodBiedry in https://github.com/storytold/cadcraft/pull/976
- Cap HATCH spline edge degree at 10 like the SPLINE reader (#923) by @MarekSpodBiedry in https://github.com/storytold/cadcraft/pull/978
- Fix grid index span overflow with a very large view (#920) by @MarekSpodBiedry in https://github.com/storytold/cadcraft/pull/979
- Autosave no longer writes the

Note
FreeBSD aarch64 is dropped from this release. We had to cut releases, and we cannot build this target within the 5-hour CI limit for any of the Craft apps, so we are dropping it for now. This is a known blocker, flagged for a future fix in storytold/craft-common-actions#39. FreeBSD x86_64 and every other platform are included.
What's Changed
- security: write files atomically through an exclusive temp file (CWE-59) by @dylanmtaylor in https://github.com/storytold/cadcraft/pull/1840
- security: do not follow directory symlinks in cargo xtask stats (CWE-400) by @dylanmtaylor in https://github.com/storytold/cadcraft/pull/1845
- security: bound geometry-kernel degree and work (CWE-407) by @dylanmtaylor in https://github.com/storytold/cadcraft/pull/1848
- security: bound drawing document-model work and allocation (CWE-400/407) by @dylanmtaylor in https://github.com/storytold/cadcraft/pull/1850
- security: budget the rendering pipeline against DoS geometry (CWE-400/407/789) by @dylanmtaylor in https://github.com/storytold/cadcraft/pull/1849
- security: bound constraint-engine work and allocation (CWE-400/407) by @dylanmtaylor in https://github.com/storytold/cadcraft/pull/1851
- security: authenticate the local control server with a per-session token (CWE-306) by @dylanmtaylor in https://github.com/storytold/cadcraft/pull/1844
- security: bound native DXF/SVG/PDF import allocation and quadratic work (CWE-400/407/789) by @dylanmtaylor in https://github.com/storytold/cadcraft/pull/1846
- security: bound Lisp callbacks, native comparisons, and local file reads (CWE-400, CWE-407) by @dylanmtaylor in https://github.com/storytold/cadcraft/pull/1842
- security: bound font outline geometry and MTEXT line scanning (CWE-400/407) by @dylanmtaylor in https://github.com/storytold/cadcraft/pull/1852
- security: guard the DXF->DWG conversion input and document decoder limits (CWE-789) by @dylanmtaylor in https://github.com/storytold/cadcraft/pull/1847
- security: submit XATTACH picked path as literal text, not a command line (CWE-74) by @dylanmtaylor in https://github.com/storytold/cadcraft/pull/1843
- security: confine craft-fonts manifest paths and reject newline Cargo directives (CWE-22, CWE-74) by @dylanmtaylor in https://github.com/storytold/cadcraft/pull/1841
Full Changelog: https://github.com/storytold/cadcraft/compare/v0.11.0...v0.12.0

Note
FreeBSD aarch64 is dropped from this release. We had to cut releases, and we cannot build this target within the 5-hour CI limit for any of the Craft apps, so we are dropping it for now. This is a known blocker, flagged for a future fix in storytold/craft-common-actions#39. FreeBSD x86_64 and every other platform are included.
What's Changed
- docs: add SonarCloud and CodeRabbit badges to README by @dylanmtaylor in https://github.com/storytold/cadcraft/pull/1566
- Skip CodeRabbit reviews on Dependabot PRs by @echelon in https://github.com/storytold/cadcraft/pull/1727
- ci: switch to shared nix workflow from craft-common-actions by @dylanmtaylor in https://github.com/storytold/cadcraft/pull/1398
- security: enforce HTTPS on curl downloads (SonarCloud S6506) by @dylanmtaylor in https://github.com/storytold/cadcraft/pull/1837
- README: the app icon above the title by @bflatastic in https://github.com/storytold/cadcraft/pull/1894
- AutoLISP: = compares the symbols type returns by @Hamza0101 in https://github.com/storytold/cadcraft/pull/1628
- AutoLISP: an entsel prompt shows the pick box whatever its message says by @Hamza0101 in https://github.com/storytold/cadcraft/pull/1635
- Treat polyline bulges with a sub-EPS sweep as straight segments by @Silvertree2010 in https://github.com/storytold/cadcraft/pull/1480
- DXF: keep foreign objects whose handles are above 2^48 (fixes #1773) by @philipp-tch in https://github.com/storytold/cadcraft/pull/1774
- Multileader sizes no longer multiplied by DIMSCALE (#1648) by @MarekSpodBiedry in https://github.com/storytold/cadcraft/pull/1678
- DWG: write the current text style's own handle, so AutoCAD opens with it current (#1650) by @MarekSpodBiedry in https://github.com/storytold/cadcraft/pull/1680
- io: the four symbol tables honour the same record cap as their peers by @midasmatterhorn in https://github.com/storytold/cadcraft/pull/1336
- Control server: wait after a failed accept instead of retrying at once by @oracola91 in https://github.com/storytold/cadcraft/pull/1718
- Keep a layout's plot window corners when saving DXF (#1667) by @MarekSpodBiedry in https://github.com/storytold/cadcraft/pull/1683
- Write the ACAD_TABLE *T block relative to its insertion point (#1644) by @MarekSpodBiedry in https://github.com/storytold/cadcraft/pull/1677
- README: verify official releases and download checksums (fixes #1554) by @C00kieMonsta in https://github.com/storytold/cadcraft/pull/1568
- Use chrono instead of hand-rolled UTC conversion by @dylanmtaylor in https://github.com/storytold/cadcraft/pull/1789
New Contributors
- @bflatastic made their first contribution in https://github.com/storytold/cadcraft/pull/1894
- @Hamza0101 made their first contribution in https://github.com/storytold/cadcraft/pull/1628
- @philipp-tch made their first contribution in https://github.com/storytold/cadcraft/pull/1774
- @midasmatterhorn made their first contribution in https://github.com/storytold/cadcraft/pull/1336
- @oracola91 made their first contribution in https://github.com/storytold/cadcraft/pull/1718
Full Changelog: https://github.com/storytold/cadcraft/compare/v0.10.0...v0.11.0

What's Changed
- RECTANG: the other corner ignores ortho, so the rectangle keeps its area by @marcoarnulfo in https://github.com/storytold/cadcraft/pull/1117
- ci: add shared FreeBSD, Windows ARM64, and nix checks by @dylanmtaylor in https://github.com/storytold/cadcraft/pull/1382
- Bound control-port input, and follow stored paths only on this computer or the drawing's share by @skylartaylor in https://github.com/storytold/cadcraft/pull/1518
Full Changelog: https://github.com/storytold/cadcraft/compare/v0.7.0...v0.8.0