anyvm 0.7.2 다운로드

Ubuntu 26.04 as a host
anyvm now runs every guest it runs on 24.04 from an Ubuntu 26.04 host too, and
CI has moved to the ubuntu-26.04 runners to keep it that way. Getting there
meant working around four regressions in 26.04's QEMU 10.2.1 / edk2 stack, each
pinned down to where it starts and fixed only there, so older hosts are
untouched.
aarch64 guests hung in the firmware. edk2-stable202508 added FEAT_LPA2
support, and from then on ArmConfigureMmu() switches the page-table format
while ArmVirtQemu is still running on its flash-resident early ID map in the old
format. On a CPU that reports a 52-bit PA range with LPA2 -- QEMU's -cpu max
under TCG, the default for most aarch64 guests here -- the next instruction fetch
faults and the firmware spins forever right after its banner
(tianocore/edk2#11962).
Ubuntu 26.04's qemu-efi-aarch64 2025.11 has the bug, so every aarch64 guest on
a 26.04 host hung. The first upstream build with the fix is no way out either:
edk2 2026.05 raises a Synchronous Exception when the loaders of FreeBSD 12.4 and
openEuler 22.03-LTS-SP4 hand over to the kernel.
anyvm now reads the build stamp embedded in the host's aarch64 UEFI image, and
when it is 2025.08 or later swaps in a pinned edk2 2024.02 build -- the
unmodified QEMU_EFI.fd from Ubuntu 24.04's qemu-efi-aarch64
2024.02-2ubuntu0.9, the firmware these guests were tested on before the move.
It is downloaded once from anyvm-org/firmware and checked against a sha256
pinned in anyvm itself, so a truncated or re-uploaded asset is discarded rather
than booted. Hosts with an older firmware keep their own.
NetBSD 9.x aarch64 hung at the interrupt controller when booting through
ACPI on QEMU 10.2.1 -- with or without the GICv3 ITS, on GICv2, and on older
virt machine types alike. It now boots from the device tree (acpi=off), which
works on 10.2.1 and on 8.2.2. NetBSD 10.x and 11.0 are not affected.
FreeBSD 13.2 - 14.3 riscv64 hung before "Timecounters tick" on QEMU 10.2.1,
the release where the Sstc timer code was reworked; turning the extension off
lets them boot, and S-mode then sets its timer through SBI as on hardware
without Sstc. anyvm uses -cpu rv64,sstc=off for those releases on QEMU 10.1
and later. 14.4, 14.5 and 15.x boot with Sstc and are left alone.
LoongArch guests had no firmware. 26.04's QEMU 10.2.1 is new enough by
version but ships without edk2-loongarch64-code.fd, so anyvm now falls back to
its pinned QEMU build whenever the system QEMU has no LoongArch firmware to
find, not only when it is older than 9.2.
Packaging. From Ubuntu 25.10 / Debian 13 on, the riscv64 emulator moved out
of qemu-system-misc into a separate qemu-system-riscv package, and the
binary names are only virtual packages apt refuses to pick between. The
dependency hint adds qemu-system-riscv only where apt knows it, and a missing
QEMU binary is now reported together with the Debian/Ubuntu package that ships
it.
New
- --firmware accepts an http(s) URL as well as a path. The image is downloaded
once into the VM's directory under a name derived from the whole URL, and a
failed download is fatal rather than silently falling back to a firmware you
did not ask for.
Fixed
- A data dir that ignores Unix permissions now fails fast with the cause. On
a WSL /mnt/<drive> mount without the metadata option every file reads as
0777, so ssh ignores the private key, every login fails, and the guest's sshd
soon refuses the host outright -- the boot could only ever time out. anyvm now
checks the key after chmod 600, stops, and prints the /etc/wsl.conf line
that fixes it (or use a --data-dir elsewhere).
- WSL without interop now says so instead of silently not opening the
browser. When explorer.exe fails with "Exec format error" -- a WSL distro
with systemd whose binfmt entry for Windows programs is gone, as on a fresh
Ubuntu 26.04 -- anyvm prints the Web VNC URL to open by hand and the two
commands that restore interop, rather than logging it only under --debug.
Other
- CI: all test workflows run on ubuntu-26.04 / ubuntu-26.04-arm, and a new
[testarch=<arch>] commit-message marker selects legs by guest architecture,
alongside [testos=] and [testhost=].
- winget: the release workflow syncs the winget-pkgs fork before submitting.
komac refuses to branch off a fork that has fallen behind upstream and reports
it as a permissions error, and with winget-pkgs taking hundreds of commits a
day that is the steady state rather than an edge case.