Aquí figuran 7 versiones de Claude Code Tray (unofficial), desde 17 de junio de 2026 hasta la actual, 1.10.0. Cada una enlaza con los instaladores del propio desarrollador.
| Versión | Fecha | Tamaño | Archivos |
|---|---|---|---|
| 1.10.0Última versión | 16 de noviembre de 2026 | — | 64 bits EXE (Inno Setup) Notas de la versión## What's new in v1.10.0
The app now speaks German and Simplified Chinese, uses far less memory while it sits in the tray, and no longer gets stuck at startup when WSL hangs.
### 🌍 Deutsch and 中文(简体)
- **Two new languages.** The menus, settings, reports, tooltips and notifications are translated into German and Simplified Chinese. The app picks them up from your Windows display language, or you can choose one in **Settings → General**. That makes seven: English, Deutsch, Español, Français, Português (Brasil and Portugal) and 中文(简体).
- The Microsoft Store page is now offered in both languages too.
### 🪶 Lighter in the tray
- **Much less memory at idle.** The app gives back the memory its startup scan used, reads transcripts with one reusable buffer, and the installed program is no longer a compressed bundle that has to be unpacked into memory. Measured on the same machine, an idle tray dropped from about 180 MB to well under 100 MB.
- **A smaller installer:** `ClaudeTray-Setup.exe` is about 18 MB smaller.
### 🛠️ Fixes
- **A hung WSL no longer stops the app from starting.** When WSL was stuck after a reboot, the tray never showed its icon and opening it again did nothing. It now waits at most two seconds for WSL and carries on.
- **The first start after installing opens the window**, so you can see the app is running even when Windows hides a new icon in the overflow. Updates and later starts stay quiet in the tray.
- **Keyboard:** the Sessions rows, the chart strip, the Context overview, the Settings sidebar and the About cards can all be reached and opened from the keyboard.
- **Settings are saved atomically**, and a settings file that could not be read is never overwritten with defaults.
- **Profiles:** usage insights and the Context page read the profile the icon shows; a profile keeps its identity while Claude Code is rewriting its config file.
- **Sessions:** the list and any call tree you opened stay put through a refresh; deleted conversations are kept correctly behind a linked projects folder.
- **Context:** plugin skills are counted, and a project's drift no longer resets.
- Counted strings say "1 conversation" instead of "1 conversations" in every language, and dates use the Gregorian calendar everywhere.
**Install or update:** from the [Microsoft Store](https://apps.microsoft.com/detail/9P27BHWNT56D), with `winget install alegauss.ClaudeCodeTray`, or by downloading `ClaudeTray-Setup.exe` below. Installed copies offer the update from the tray menu.
---
Unofficial community project, not affiliated with, endorsed by, or sponsored by Anthropic. |
| 1.9.0 | 31 de octubre de 2026 | — | 64 bits EXE (Inno Setup) Notas de la versión## What's new in v1.9.0
The app is now on the Microsoft Store. This release also adds a feed from Claude Code's status line, alerts at the usage levels you pick, a period view for sessions and support for WSL.
### 🛍️ On the Microsoft Store
- **Install from the Store:** [Claude Code Tray on the Microsoft Store](https://apps.microsoft.com/detail/9P27BHWNT56D). The Store copy updates through the Store and starts at sign-in through Windows' own startup setting.
- **Opening the app shows it.** Launching it from the Store, the Start menu or a shortcut opens the window, so you can see it is running. Launching it again while it runs brings the window back. At sign-in it still starts quietly in the tray.
- **The window tells you when the icon is hidden.** If Windows put the icon in the overflow (the **^** next to the clock), a strip at the top of the window says so. One click opens the taskbar settings where you can pin it.
- **No Claude Code yet? It says so.** On a machine without Claude Code, the tooltip, the Statistics page and the menu say it is not installed and link to the official install page. They no longer ask you to run `/login` in a program you don't have.
- The taskbar icon of the Store copy no longer sits on a coloured square.
### 📈 Fresher readings, fewer calls
- **The status line feeds the tray.** Add the entry shown in **Settings → Claude Code** to Claude Code's status line, and each terminal session hands the tray its current quota. The tray then skips the API call that reading makes redundant. Settings tells you which profiles already have it set up.
- **Quieter when you're idle.** After 30 minutes with no Claude Code activity, the tray checks every 30 minutes and right after a reset. It goes back to its normal interval as soon as you work again.
- **Each account is checked once per round**, even when several profiles point at it.
### 🔔 Alerts at your own levels
**Settings → Notifications** takes a list of levels per window, for example 50%, 80% and 95% of the week. Each level is announced once per reset, when a reading passes it. When the icon shows what's left, the levels count what's left too.
### 🗂️ Sessions by day, week or month
- **The Sessions tab groups by day, week or month**, with sessions, turns, tokens and the list-price equivalent for each period.
- **Deleted conversations keep their row for a year**, marked as deleted. Settings shows how many there are and can forget them.
### 🐧 WSL
A Claude Code signed in inside a running WSL distro shows up as a profile of its own. Its quota, sessions and context load are read, and **Open Claude Code** launches it in that distro.
### 🎛️ Smaller things
- **Both windows on the icon:** an option in **Settings → Display** splits the bar into the session on the left and the week on the right, each in its own pace colour. It is off by default.
- **For scripts:** `ClaudeTray.exe --usage --json` prints where the quota stands, with an exit code for on track, near the limit, at the limit, or no reading. `--sessions --json` lists conversations (no titles or prompts).
- **Prices:** Opus 5.5, Sonnet 5.5, Haiku 5.5, Fable 5.1 and Mythos 5.1 have their own rates. Cache reads use each model's own multiple, and Haiku 5.5 prompts over 100K tokens are priced at the higher tier.
- **Profiles:** saving Settings no longer resets `CLAUDE_CONFIG_DIR` when you only changed something else. Picking the profile the icon already shows now pins it.
- After a week of use, a card asks once whether you'd star the project on GitHub. Nothing leaves your machine to decide that, and it never shows again.
**Install or update:** from the [Microsoft Store](https://apps.microsoft.com/detail/9P27BHWNT56D), with `winget install alegauss.ClaudeCodeTray`, or by downloading `ClaudeTray-Setup.exe` below. Installed copies offer the update from the tray menu.
---
Unofficial community project, not affiliated with, endorsed by, or sponsored by Anthropic. |
| 1.8.0 | 20 de octubre de 2026 | — | 64 bits EXE (Inno Setup) Notas de la versión## What's new in v1.8.0
One new notification, plus a window that fits smaller screens.
### 🔴 A warning before a limit runs out
The icon has always turned red when your pace would use up a window before it resets. That only helps if you happen to look at the tray. Now a **red toast says it once**, titled *On pace to run out*. It tells you how long until the window runs out at this pace and when it resets.
• **Once per window, per reset.** The 5-hour session and the weekly window each get at most one warning per cycle. It does not repeat every poll, and restarting the tray mid-cycle does not send it again.
• **The same verdict as the icon.** The toast and the red bar use the same pace line, so you never get a toast without the red icon, or a red icon without the toast.
• **Quiet when it would be noise.** No warning in the first tenth of a window, when a pace has nothing behind it yet. No warning for a window that has already hit its limit either, because the icon already says it is blocked.
• **On by default**, under **Settings → Notifications → On pace to run out**. Unlike the reset toasts, this one is plain red, with no confetti.
### 🖥️ Fits smaller screens
• **The window fits screens shorter than 960 pixels**, down to 720p. On a short screen it now opens sized and centred to the work area instead of running off the bottom of the screen.
• **The Statistics charts size to the window.** The pace and throughput charts grow with a tall window and shrink with a short one, down to a minimum height. Below that the page scrolls, so the axis labels are never clipped.
### 🔬 Under the hood
Nothing here changes what the app does. It changes what can ship broken.
• **The UI checks drive the real window.** The 3,004-line interaction harness is gone. Every claim it made is now a case run by [winwright](https://github.com/alegauss/winwright):keyboard input under the tray's own message loop, the right-click menu, the profile switch, the linking plan, the session rows and what each control announces to a screen reader.
• **Previews are drawn by the app, not copied off the screen**, so nothing on top of the window can end up in a screenshot, and a popup can be photographed at all.
• **The local release script says it did not submit to winget**, and how to submit it, instead of looking like it had.
### 🌐 The site
The site at [alegauss.github.io/claude-tray](https://alegauss.github.io/claude-tray/) now uses the shared alegauss design system, in the same clay colours. Once it is redeployed, Google Analytics loads only if you allow it. The sponsor block uses Viglet's new logos and product names.
**Install or update:** `winget install alegauss.ClaudeCodeTray`, or download `ClaudeTray-Setup.exe` below. Installed copies offer the update from the tray menu.
---
Unofficial community project, not affiliated with, endorsed by, or sponsored by Anthropic. |
| 1.7.2 | 26 de agosto de 2026 | — | 64 bits EXE (Inno Setup) Notas de la versión## What's new in v1.7.2
The biggest release since profiles arrived — **33 commits** — and one theme:**two Claude Code profiles, made one setup.**
### 🔗 One setup across profiles
A fresh profile starts genuinely empty:no user `CLAUDE.md`, no settings, no skills, plugins or project history. That isolation is the point when the two accounts are two jobs. It is in the way when they are one person changing subscription — and the fix by hand is a dozen `mklink` commands in an order where the wrong one loses a folder.
**Settings → Claude Code → One setup across profiles** now picks which profile keeps its files and shows you, folder by folder, what sharing them would mean:
• **merged** — `projects`, `file-history` and the things you wrote yourself (`skills`, `agents`, `commands`, `output-styles`) are unioned first, so neither side loses anything, and each row says how many folders would be copied over. `history.jsonl` is merged line by line, ordered on each line's timestamp.
• **adopted** — `plugins` and your `CLAUDE.md` are taken whole from the profile that keeps its files. A plugin records where it was installed, so merging those entry by entry would leave half of them pointing at a folder that is no longer there.
• **not offered** — `settings.json` *could* be merged, and that is exactly why it isn't:the union would widen the other account's permission allowlist, which is your call. **So it shows you what you are deciding** — how many rules would arrive on each side, which lists they land in, and the first few by name. Rules arriving in `deny` are counted apart, because those take capability *away* and folding them in would make the safe half look like the risky one. Hooks are listed per event with a count each side, because a hook is a command line that runs and no total answers that.
• **never** — `.claude.json` and `.credentials.json`. Your sign-in and the file that makes this a separate account are not part of "one setup", and no button here will touch them.
**And it says what it has no opinion about.** The list above is a list of opinions, so the plan closes by naming everything else sitting at the top level of either folder — not because those are safe to share and not because they are not, but because nothing here has a view. Per-machine caches and snapshots are counted rather than named.
**The button writes a script; nothing else happens.** Claude Code Tray has no way to write into a configuration folder and isn't growing one — so **Write script…** saves a PowerShell file where you point it and opens the folder. Read it, then run it. Even then a bare run only *prints* what it would do:it takes a second run with `-Apply` to change anything, it never asks for administrator rights, and it never deletes — every original is renamed beside its link so you can put it back. If the plan needs a file symlink and Windows has no Developer Mode, it says so **before** it moves anything rather than half-way through.
**One consequence, stated before you decide.** Sharing `projects` is most of the point — and it also means both profiles report the same "last turn", so **Follow the active profile** can no longer tell which of them you are in and stops moving the icon between that pair. The script's header says so, in those two profiles' names, before you run it.
### 🧭 Auto-follow knows when it cannot help
• **It no longer flips between two profiles that share one folder.** A junction can put two config directories behind one `projects` tree, and then the newest write is the same fact twice — evidence about neither of them. Both are taken out of the running, so the icon stays where you put it instead of being pushed back and forth by whichever was scanned second.
• **And the setting says so.** When every profile it could follow reads the same project history as another one, **Follow the active profile**'s own description tells you it can do nothing right now, rather than leaving you a switch that looks on and never moves the icon. |
| 1.7.1 | 12 de agosto de 2026 | — | 64 bits EXE (Inno Setup) |
| 1.3.16 | 30 de junio de 2026 | — | 64 bits EXE (Inno Setup) |
| 1.2.0 | 17 de junio de 2026 | — | 64 bits EXE (Inno Setup) |