Λήψη Gleanvolt 1.1.0

Install
Debian, Ubuntu, Raspberry Pi OS (64-bit)
Installs the controller and its web UI as a systemd service, started with the default
configuration. Run it again to upgrade; settings and data are kept.
curl -fsSL https://github.com/mpospisil/gleanvolt/releases/latest/download/install.sh | sudo sh
Or by hand, choosing amd64 or arm64:
wget https://github.com/mpospisil/gleanvolt/releases/download/v1.1.0/gleanvolt_1.1.0_arm64.deb
sudo apt install ./gleanvolt_1.1.0_arm64.deb
Then open http://<device>:8090 and set your inverter and charger addresses in
/etc/gleanvolt/gleanvolt.env.
Docker
docker pull ghcr.io/mpospisil/gleanvolt:1.1.0
Or download a self-contained build below and run it — no .NET installation needed.
gleanvolt-1.1.0-win-x64.zip for Windows, linux-arm64 for a Raspberry Pi,
linux-x64 for an x64 Linux host or NAS.
The .nupkg files are the libraries, for building on the controller directly.
They are attached here rather than pushed to a feed.
Verify your download
SHA256SUMS covers every file here. From the directory you downloaded into:
sha256sum -c --ignore-missing SHA256SUMS
--ignore-missing because you have probably taken one file rather than all of them.
On Windows, without installing anything:
Get-FileHash gleanvolt-1.1.0-win-x64.zip -Algorithm SHA256
and compare it with the line in SHA256SUMS. PowerShell prints the hash in upper case;
the file lists it in lower case, and they are the same hash.
Each zip, .deb, install.sh and .nupkg also carries a build provenance attestation, which says
which workflow run and which commit produced it rather than only that the bytes are
unchanged. That needs no trust in this page:
gh attestation verify gleanvolt-1.1.0-linux-arm64.zip --repo mpospisil/gleanvolt
Changes
- Release smoke test: configure a location and no password, so it is not in setup mode (#326)
- Supported PV systems: Dražice inverters as rebadged SolaX (#315)
- Supported PV systems: Manufacturer column on the inverter and charger tables (#314)
- Restart from the web UI applies settings without a supervisor (in-process restart) (#313)
- Settings and wizard: tips that say what each field means, and Reveal for typed passwords (#312)
- Setup 3: the command-line route (#303) (#311)
- API keys created on Settings: 24 letters and digits instead of 64 hex (#310)
- Setup 2: Home Assistant (MQTT) and the API on Settings and in the wizard (#302) (#309)
- Setup 2 wizard (#308)
- Setup 2: the weather key on Settings and in the wizard (#302) (#307)
- Setup 2: web setup wizard with device discovery, and the hybrid gate (#302) (#306)
- Setup 1: setup mode instead of a startup failure, and password reset (#301) (#305)
- Setup 0: no reference site in the shipped defaults (#300) (#304)
- Solar: a battery that stops taking charge short of the gate counts as full (#298)
- L10n: Czech terms for the controller, the rest level and the solar forecast (#297)
- L10n: simpler, correct Czech and English in the web UI (#296)
- L10n: the web UI in Czech (#291) (#295)
- i18n, part 2: the rest of the service text, and stored phrases read back (#292) (#294)
- The web UI is translatable; the services stay invariant (#290) (#293)
- Container networking: the host network, and a broker on any device (#268) (#289)
- Sun only on a targeted charge, from the web UI and Home Assistant (#251) (#288)
- Settings: the Solcast account, entered and applied without a restart (#286) (#287)
- Settings: the redesign's info tips, restart banner and SolaX phase names (#255) (#285)
- Session energy starts afresh on an unplug in Off (#283) (#284)
- Forecasted, until full: one session over several days (#279) (#282)
- Every mode waits and ends the same way (#280) (#281)
- Charging plan: the redesign's info tips (#255) (#278)
- Overview: the redesign's info tips, session card and car stats (#255) (#277)
- Fast and SolarGrid can wait for low tariff (#274) (#276)
- The grid tariff: providers, the table on Settings, and where it shows (#273) (#275)
- Breaking: the HTTP API carries base units only (#263, step 3) (#272)
- One base unit per quantity below the UI (#263, step 2) (#271)
- One formatter for units in the web UI (#263, step 1) (#270)
- Find the SolaX devices on the LAN: gleanvolt-discover (#267, step 1) (#269)
- A password set on /setup unlocks the settings without a restart (#254) (#266)
- Forecasted never arms the battery hold (#264)
- Seven links: Overview, and Settings for the installation and health (#255) (#262)
- Finish the Classical restyle on the remaining pages (#255) (#261)
- Show the Targeted preview as Classical's 1d dialog (#255) (#260)
- Lay the dashboard out as the Classical overview (#255) (#259)
- Restyle sign-in as Classical's centred card, with the error on the field (#255) (#258)
- Restyle the web UI's foundation to the Classical design system (#255) (#256)
- Anchor the static-assets manifest to the content root only for a single-file publish (#252 follow-up) (#257)
- A Nano Server smoke test for WinGet's actual install layout, not an approximation (#253)
Licence: free for any noncommercial purpose under the PolyForm Noncommercial
License 1.0.0. Commercial use requires a separate licence — see LICENSE.