xTool Studio: download ældre versioner

General
1. Performance: Optimize the import and editing performance of complex vector files. Files open sooner, and dragging and editing feel smoother.
2. Support two modes for the AI Assistant — docked in the side panel, or as a standalone window. Switch between them at any time, and move the standalone window to a second display.

Editor
1. Support importing Adobe Illustrator (.ai) files directly.
2. Support adding rounded corners to any vector shape.
3. Add Resize Slots, which finds every slot and interlocking joint in a file and resizes them all to your target thickness in one step.
4. Add three sizing modes for text: Auto Width, Auto Height and Auto Fit.
5. Add the shortcut Command (Ctrl) + D for duplicating a selection in place. The command is also available in the menu bar.
6. Add the shortcut V in node editing to switch back to the Selection tool.
7. Add scenario presets to Nesting, along with a deep-optimization option that packs parts in tighter to improve material utilization.
8. In Print mode, new text and shapes are now filled by default.
9. Upgrade AI relief generation, with more depth and finer printed detail.

Material Settings
1. Add AI material recognition with setting recommendations: take a photo, and Studio identifies the material and applies matching settings.
2. Add test array recognition: Studio reads the results off your test grid automatically, so you can save and reuse them in one tap.
（Both features are supported on the following machines: M2, P3, P2S, P2, F2, F2 Ultra, F2 Ultra UV and F2 Ultra Single.）

Machines
1. Laser machines
- Add Offset fill, which follows the outline of a shape ring by ring instead of scanning back and forth across it, noticeably improving efficiency on hollowed vector fills.
- Add a Scan angle setting for choosing the fill direction of vector shapes. On materials with a visible grain, such as wood, lining the scan angle up with the grain gives a more even finish. (P, S and M series)
- Add Ramp, for sharper and longer-lasting engraved stamps. (P, S and M series)
2. O1 Omni Printer
- Add Roll Film Mode for batch-producing transfer stickers, wall art and more.
- Optimize device health information, with clearer ink level details and maintenance steps.
- Add default ink prices, so you can estimate what a print will cost.
- Support resuming a print after it has been interrupted.
- Support setting white ink reduction per element.
3. M2
Add Capture and Trace: the camera captures what is on the bed, recognizes the artwork and generates a cuttable outline.
4. F2 Ultra UV
Upgrade the internal engraving algorithm: visibly finer detail, and jobs now take about half the time on average.

Fixes
1. Fix an issue where nodes could not be deleted one after another. You can now hold Delete to remove adjacent nodes.
2. Fix various other known issues.

- Fix some known bugs

This release focuses on improving the first-time setup, printing stability, rotary attachment workflows, roll printing, and multi-device workflows for the O1 Omni Printer.
Key Updates
- Key update: Improved the first-time setup flow, including ink loading, white ink circulation, nozzle checks, and error handling.
- Improved full-wrap printing, white ink uniformity on tapered objects, and horizontal seam lines in roll printing.
- Improved rotary attachment leveling, height measurement, alignment, handle avoidance, and canvas size calculation.
- Enhanced calibration printing with more reliable cover-open pause, failure interruption, and error prompts.
- Enhanced multi-device workflows with support for more devices, size validation, manual alignment, and device assignment guidance.
- Added alerts for consumable issues, maintenance fluid switching, and UV/DTG protection.
- Support multi-device workflow — print-then-cut between the O1 and P2, P2S, and M2

General
1. Add Project Notes — save your tips and cautions with the project, shown automatically on reopen or before processing so you don't repeat mistakes (.xs files only)
2. Upgrade My Space — adds a Local Space to quickly manage local projects / assets, bringing cloud, local, and favorite assets together in one place

Editor
1. Add Warp — bend, arch, distort, and apply perspective to text and images using preset shapes or custom parameters
2. Add Pattern Fill — fill shapes with image patterns in multiple layouts for quick repeating textures (M2 & printing devices only)
3. Rebuild node editing — split into dedicated Select / Add / Delete / Break tools for clearer, faster path editing
4. Add Segment Trim — clean up extra segments between crossing paths in one click
5. Set Elements as Variables — element content auto-updates from list data, so one layout can batch-produce different designs — ideal for jig workflows
6. Optimize the canvas user experience — objects turn semi-transparent while moving, rotating, or scaling for easier alignment. Zooming supports automatic snapping
7. Improve Offset - add an adjustable precision option for balancing speed and detail

Material Parameters
1. Support local storage & offline use — save and use material parameters even without a network connection
2. Upgrade Material Management — two-way local–cloud sync, plus import, export, batch delete, and new .mxs export (parameters + result images)
3. Add Parameter Sharing — share saved or just-used parameter settings; featured shares may appear in the Material Parameters section on the Home page for others to reference

Devices
1. Support the all-new multifunction printer: xTool O1 omni printer
2. Support multi-device workflow — print-then-cut between the O1 and P3, M1 Ultra, and S1 (P2S, P2, M2 coming soon)
3. M2: Add one-click cutting contours — instantly assign irregular, rectangular, circular, or heart shapes to bitmaps / vectors, all editable afterward
4. M2: Support per-element air pump flow — flow controls moved to the parameter panel, configurable per machining element (firmware 40.141.010.3 or later)
5. P3: Support one-click video editing & sharing — auto-edit recorded processing videos and share to Instagram, Facebook, etc.
6. F2: Support Auto Mode — after closing the lid, auto-focus, refresh background, recognize the material QR code, and center canvas elements within the material outline — truly place-and-create (firmware v024 or later)
7. Add real-time rotary preview — with RA3 auto-modeling on P3/M2, a mini-window shows the design's position on the object in real time, with a centerline guide for easier alignment
8. Improve flat preview — cutting now shows the true cut-through result, plus a Layer Selector and Exploded View for complex designs and thickness info in material preview
9. Add glass inner-engraving preview

Bug Fixes
1. Fixed a crash when extracting contours in certain cases
2. Fixed a processing-mode mismatch when importing Keychain Generator designs into Studio
3. Fixed slow file transfer on the Apparel Printer in certain cases
4. Fixed slow estimated-time generation for certain files
5. Fixed other known issues

Fixed some known bugs

Updates Since V1.7.22
1. Fixed some known bugs.

What’s New in V1.7.24
1. Major File Format Upgrade (Please Read)
Starting with v1.7, new projects are saved in the new .xs format by default, delivering better stability for saving, syncing, and handling large projects. Cloud projects also gain Version History — view, restore to any version, or duplicate from any historical version.
- .xcs files saved in earlier versions can still be opened and edited in Studio v1.7 and above.
- .xs files cannot be opened in earlier versions of Studio. To stay compatible with older versions, export your project as .xcs.

2. Editor
- Template Library — built-in templates for composition, layout, and style. Ready to use out of the box.
- Measurement tool upgrade — shortcut-key switching, multiple measurements shown at once, and a new angle measurement mode. Measure and adjust on the fly.
- Array improvements — edit any parameter (count, spacing, radius, arrangement) after the array is created; grid arrays now support two spacing modes (edge-to-edge / center-to-center); circular arrays let you click directly on the canvas to set the center point.
- Smarter Invert — for images with transparency, fill the transparent area with black or white in one click before inverting. Great for stamp negatives.
- Boolean operations now support real-time preview — see the union / difference / intersection result before applying.
- Path text can now be placed inside, on, or outside the path.
- Shadow effects — add shadows to images and text (for print-capable devices).
- Save canvas elements to My Space with a right-click.
- Set the default mouse-wheel behavior to either pan or zoom the canvas.
- The editor toolbar and left panel are now resizable by dragging.

3. Material Parameters
- When a material has multiple parameter presets, you can now set a default preset.
- The title of a material test array can now be customized.

4. Devices
- Manual tab editing — add, drag, and delete tabs directly on the canvas to handle complex contours.
- Set the start point and direction for any individual closed path.
- Focus lift in laser vector engraving and vector fill — achieve varied effects with different depths and light/dark or solid/dashed styles.
- Custom line density for laser vector fill and bitmap engraving.
- Add Bitmap mode description
- xTool M2 is now supported
- P2S / P2: Close-up Stitching — take multiple close-up shots in one go and let Studio stitch them into a single high-resolution image.
- P3: Processing Video Recording — record the machining process and save the video to your computer.
- F2 Ultra now supports Auto Mode — close the lid and the machine auto-focuses, refreshes the background, recognizes the material QR code, and centers your canvas elements within the material outline. Truly place-and-create. (Requires firmware v021 or above.)

5. Bug Fixes
- Fixed: tapping View More in the homepage's Recent section incorrectly opened cloud storage.
- Fixed: an occasional failure when opening projects.
- Fixed: pasting a copied nested group placed the paste inside the original group.
- Fixed: device algorithm compatibility issues on older macOS versions.
- Fixed other known bugs.

Updates Since V1.7.22
1. Fixed other known bugs.

What’s New in V1.7.23
1. Major File Format Upgrade (Please Read)
Starting with v1.7, new projects are saved in the new .xs format by default, delivering better stability for saving, syncing, and handling large projects. Cloud projects also gain Version History — view, restore to any version, or duplicate from any historical version.
- .xcs files saved in earlier versions can still be opened and edited in Studio v1.7 and above.
- .xs files cannot be opened in earlier versions of Studio. To stay compatible with older versions, export your project as .xcs.

2. Editor
- Template Library — built-in templates for composition, layout, and style. Ready to use out of the box.
- Measurement tool upgrade — shortcut-key switching, multiple measurements shown at once, and a new angle measurement mode. Measure and adjust on the fly.
- Array improvements — edit any parameter (count, spacing, radius, arrangement) after the array is created; grid arrays now support two spacing modes (edge-to-edge / center-to-center); circular arrays let you click directly on the canvas to set the center point.
- Smarter Invert — for images with transparency, fill the transparent area with black or white in one click before inverting. Great for stamp negatives.
- Boolean operations now support real-time preview — see the union / difference / intersection result before applying.
- Path text can now be placed inside, on, or outside the path.
- Shadow effects — add shadows to images and text (for print-capable devices).
- Save canvas elements to My Space with a right-click.
- Set the default mouse-wheel behavior to either pan or zoom the canvas.
- The editor toolbar and left panel are now resizable by dragging.

3. Material Parameters
- When a material has multiple parameter presets, you can now set a default preset.
- The title of a material test array can now be customized.

4. Devices
- Manual tab editing — add, drag, and delete tabs directly on the canvas to handle complex contours.
- Set the start point and direction for any individual closed path.
- Focus lift in laser vector engraving and vector fill — achieve varied effects with different depths and light/dark or solid/dashed styles.
- Custom line density for laser vector fill and bitmap engraving.
- Add Bitmap mode description
- xTool M2 is now supported
- P2S / P2: Close-up Stitching — take multiple close-up shots in one go and let Studio stitch them into a single high-resolution image.
- P3: Processing Video Recording — record the machining process and save the video to your computer.
- F2 Ultra now supports Auto Mode — close the lid and the machine auto-focuses, refreshes the background, recognizes the material QR code, and centers your canvas elements within the material outline. Truly place-and-create. (Requires firmware v021 or above.)

5. Bug Fixes
- Fixed: tapping View More in the homepage's Recent section incorrectly opened cloud storage.
- Fixed: an occasional failure when opening projects.
- Fixed: pasting a copied nested group placed the paste inside the original group.
- Fixed: device algorithm compatibility issues on older macOS versions.
- Fixed other known bugs.

1. Major File Format Upgrade (Please Read)
Starting with v1.7, new projects are saved in the new .xs format by default, delivering better stability for saving, syncing, and handling large projects. Cloud projects also gain Version History — view, restore to any version, or duplicate from any historical version.
- .xcs files saved in earlier versions can still be opened and edited in Studio v1.7 and above.
- .xs files cannot be opened in earlier versions of Studio. To stay compatible with older versions, export your project as .xcs.

2. Editor
- Template Library — built-in templates for composition, layout, and style. Ready to use out of the box.
- Measurement tool upgrade — shortcut-key switching, multiple measurements shown at once, and a new angle measurement mode. Measure and adjust on the fly.
- Array improvements — edit any parameter (count, spacing, radius, arrangement) after the array is created; grid arrays now support two spacing modes (edge-to-edge / center-to-center); circular arrays let you click directly on the canvas to set the center point.
- Smarter Invert — for images with transparency, fill the transparent area with black or white in one click before inverting. Great for stamp negatives.
- Boolean operations now support real-time preview — see the union / difference / intersection result before applying.
- Path text can now be placed inside, on, or outside the path.
- Shadow effects — add shadows to images and text (for print-capable devices).
- Save canvas elements to My Space with a right-click.
- Set the default mouse-wheel behavior to either pan or zoom the canvas.
- The editor toolbar and left panel are now resizable by dragging.

3. Material Parameters
- When a material has multiple parameter presets, you can now set a default preset.
- The title of a material test array can now be customized.

4. Devices
- Manual tab editing — add, drag, and delete tabs directly on the canvas to handle complex contours.
- Set the start point and direction for any individual closed path.
- Focus lift in laser vector engraving and vector fill — achieve varied effects with different depths and light/dark or solid/dashed styles.
- Custom line density for laser vector fill and bitmap engraving.
- Add Bitmap mode description
- xTool M2 is now supported
- P2S / P2: Close-up Stitching — take multiple close-up shots in one go and let Studio stitch them into a single high-resolution image.
- P3: Processing Video Recording — record the machining process and save the video to your computer.
- F2 Ultra now supports Auto Mode — close the lid and the machine auto-focuses, refreshes the background, recognizes the material QR code, and centers your canvas elements within the material outline. Truly place-and-create. (Requires firmware v021 or above.)

5. Bug Fixes
- Fixed: tapping View More in the homepage's Recent section incorrectly opened cloud storage.
- Fixed: an occasional failure when opening projects.
- Fixed: pasting a copied nested group placed the paste inside the original group.
- Fixed: device algorithm compatibility issues on older macOS versions.
- Fixed other known bugs.

Updates Since V1.6.6
- Follow-up update to address a few issues identified after the 1.6.6 release, with additional stability improvements
- Fixed occasional project open failures
- Fixed an issue where copied nested groups could be pasted back into the same parent group
- Improved algorithm compatibility on older macOS versions

What’s New in V1.6.8
Editor
- Add text warp and custom path layouts for more expressive typography
- Support nested grouping for easier management of complex designs
- Add common shortcuts (duplicate, invert colors, boolean operations) to speed up workflows
- Support arithmetic input and unit conversion (mm/inch) in value fields
- Improve image editing by enabling opacity adjustment directly on the canvas
- Add a halftone-style background removal tool to improve print quality and reduce ink usage
- Add AI Relief to convert images into relief-ready depth maps in one click

---
Material & Processing
- Support one-click copy/paste of processing parameters via right-click menu
- Improve cross-project copy to retain original processing settings
- Auto-sync canvas settings (processing mode, background image, measurement data)
- Support custom material parameters with defaults per processing mode
- Add parameter presets for quick reuse across materials and modes
- Add AI-powered troubleshooting with guided assistance
- Add AI result analysis with one-click optimization suggestions

---
Device
- Add safety reminders for high-reflective materials on F series
- Support internal engraving on F2 Ultra UV crystal balls with non-official jigs
- Add screen printing plate-making mode for F2
- Apparel Printer:
- Add self-service troubleshooting for white ink pinholes and cutting issues
- Add output quality options for smoother edge rendering
- Support same-direction processing in P2S batch mode for better double-sided consistency

General
- Update installation flow with agreement confirmation before install
- Improve feedback form with auto-filled info and one-click log upload

Bug Fixes
- Fix an issue where closing a project may incorrectly show “Saving…” and delay exit
- Fix edge artifacts in models generated by 3D Photo
- Fix other known issues

Editor
- Add text warp and custom path layouts for more expressive typography
- Support nested grouping for easier management of complex designs
- Add common shortcuts (duplicate, invert colors, boolean operations) to speed up workflows
- Support arithmetic input and unit conversion (mm/inch) in value fields
- Improve image editing by enabling opacity adjustment directly on the canvas
- Add a halftone-style background removal tool to improve print quality and reduce ink usage
- Add AI Relief to convert images into relief-ready depth maps in one click

Material & Processing
- Support one-click copy/paste of processing parameters via right-click menu
- Improve cross-project copy to retain original processing settings
- Auto-sync canvas settings (processing mode, background image, measurement data)
- Support custom material parameters with defaults per processing mode
- Add parameter presets for quick reuse across materials and modes
- Add AI-powered troubleshooting with guided assistance
- Add AI result analysis with one-click optimization suggestions

Device
- Add safety reminders for high-reflective materials on F series
- Support internal engraving on F2 Ultra UV crystal balls with non-official jigs
- Add screen printing plate-making mode for F2
- Apparel Printer:
- Add self-service troubleshooting for white ink pinholes and cutting issues
- Add output quality options for smoother edge rendering
- Support same-direction processing in P2S batch mode for better double-sided consistency

General
- Update installation flow with agreement confirmation before install
- Improve feedback form with auto-filled info and one-click log upload

Bug Fixes
- Fix an issue where closing a project may incorrectly show “Saving…” and delay exit
- Fix edge artifacts in models generated by 3D Photo
- Fix other known issues

Software & Editor Updates
1. Powerful Layers: Supports up to 16 layers with numeric identification. Improves organization for complex designs and enhances accessibility.
2. Text Upgrade: Text now supports RTL languages (e.g., Arabic) and vertical layout.
3. Personalized Couple Swing SVG Generator: Easily turn images into hanging silhouette decor.
4. Material Grid Test Upgrade: Supports bitmap images for automatic grid testing.
5. Enhanced Batch Processing:
- Smart Numbering: Auto-increment sequences with customizable prefixes and suffixes.
- Batch Coding: Generate QR codes and barcodes in bulk.
- Data Merge: Automatically match and populate designs with data from external spreadsheets.
6. New Languages Supported: Indonesian, Malay, and Vietnamese.
------
Device Updates
1. Improved Device Management: Faster discovery, one-click switching, and manual device removal or disconnection.
2. RA3 now supports F1 Ultra and F2 Ultra.
3. F2 Ultra UV 3D Photo Enhanced: Significantly improved 3D textures in Inner Engraving mode, with automatic depth optimization for sharper results.
4. MetalFab-SaveGas™ (Beta): Automatically detects idle movements and shuts off gas to reduce consumption while maintaining processing quality.
------
Bug Fixes
1. Fixed calibration page display issues on F2 Ultra UV screens.
2. Fixed an issue where the coordinate panel incorrectly displayed "Mixed" for nodes aligned on the same axis during node editing.
3. Fixed missing textures when importing AI-generated 3D models.
4. Fixed other known bugs.

1. Editor - Applications:
- Enhanced UI: Now categorized into "Productivity Tools" and "Generators" to help you find what you need at a glance.
- More Creative Tools: Explore our new Flower Generator and Christmas Ornament Generator—perfect for crafting Valentine’s gifts and personalized ornaments with ease.
2. Object Rotation Optimization:
- Hold Ctrl/Command while rotating to disable 45° auto-snapping for interference-free rotation.
- Hold Shift for stepping rotation in 15° increments.
3. Improved alignment rules for better usability:
- Click-select: Aligns to the last selected object.
- Frame-select: Aligns to the bottom-most object.
4. Smarter Initial Connection: Faster auto-recognition on the first USB plugin. (Official USB cable recommended for optimal results.)

Bug Fixed:
1. Fixed auto-masking bug when switching to Eraser on zoomed images.
2. Fixed input limit: Text line and letter spacing now support negative values.
3. Fixed issue where deleting decimals in spacing inputs would also remove the decimal point.
4. Fixed inaccurate time estimation for F-series low-density scanning.
5. Fixed intermittent auto-switching from Pointer to Hand tool when using a tablet on the canvas.
6. Fixed an issue where parameter settings would incorrectly reset from "Custom Settings" to "Recommended Settings" when reopening a saved project.
7. General bug fixes and stability improvements.

1. New xTool Academy: The homepage now includes the "xTool Academy," where users can quickly access design and processing knowledge.
2. New In-App Feedback: When encountering software issues or suggestions, users can directly submit feedback or report problems via the account menu > Feedback.
3. Editor Experience Optimization:
- The top design bar has been reorganized to provide more space for displaying important information and tools.
- The font library now includes a "Single-line Fonts" collection, providing more design options.
- The text now defaults to the last used font, weight, and size, simplifying the font setting process.
- The row and column limits for square arrays have been increased, enabling the creation of larger arrays and improving design efficiency.
- Mouse middle-click drag support for canvas.
4. New Regular Hexagon Puzzle: Supports selecting puzzle direction blocks and adds puzzle border functionality.
5. Material Grid Test Optimization: Supports automatic array generation, simplifying the operation process.
6. Supports Custom Path Settings in Rotating Fixture Mode: Improves processing efficiency in specific scenarios.
7. Supports Over-Cutting Settings: Solves the problem of the starting and ending points not cutting through, ensuring more complete processing results. (Only supports non-F series devices.)
8. Supports Step-by-Step Focus Sink: Significantly improves cutting capability by gradually sinking the focus, resulting in better cutting effects. (Supported devices: P2 / P2S / P3 / S1 / F1U / F2 / F2U / F2U UV)
9. New Lead-in Feature for P3: P3 now supports the lead-in feature, solving the blackening issue at the starting point and improving processing precision and efficiency.
10. Apparel Printer:
- Supports 600mm long material printing (requires 023 firmware).
- Optimized white ink reduction function, supporting the setting of non-reduced areas through the spot color channel.
- Added 5 self-service troubleshooting functions to help users quickly resolve common issues and avoid work interruptions.
11. Bug Fixed:
- Solved the issue of poor processing precision at low line density (F series only).
- Fixed the issue of coordinate origin changes and abnormal size display after object rotation.
- Fixed the issue of occasional font not applying when clicked.
- Fixed other known issues.

Bug fixes and improvements.

1. XCS Upgrade! The brand-new xTool Studio client is live — easier design, smoother processing, more comprehensive features, and a seamless creative experience. (Installing Studio will not overwrite XCS.)
2. Massive fonts & assets library, plus uploads supported.
3. Smarter images: auto-adjust, improved filters, 3 AI tools.
4. Boost productivity with smart templates & project generator.
5. Revamped material library with usage tips.
6. Cloud-synced parameters linked to materials.
7. Processing preview with simulation & smart detection.
8. MetalFab supports engraving: The new combined processing mode supports engraving processing.