Thetis: baixar versions anteriors

## Thetis v2.10.3.14 - Release

IMPORTANT : if you are updating from a pre v2.10.3.13 version then make a backup of your database
before using this version. If you have an existing database that pre-dates v2.10.3.13 then Thetis
will pop up a message asking you to restart whilst holding down the CTRL key. Please follow the
onscreen instructions.

JTDX/WSJTX：Watch the highlight video above if you are having issues getting JTDX/WSTJX to transmit
via TCI audio

This version, v2.10.3.14, will be the last version released publicly by MW0LGE - Richard Samphire.
This repo will no longer be updated or monitored.

## v2.10.3.14 - Change Log

• [add] otherbutton wave record now supported. Extra folder called 'waverecord' will store these.
Right click to open folder or via Setup->Audio->Recording. Similar to the [Record] button from
the WaveForm of old. Note：tx/rx transition will terminate recording
• [add] new simple WaveList record item so that wav files can be dragged to a list and played on
demand. No repeat via this simple list method. Note：you will not be able to use this if Thetis
is run as administrator
• [add] distance shown when hovering over a TCI spot if that spot has been provided with distance
info via the json payload
• [add] added custom TCI commands related to preamp and step attenuator
rx_step_att_enabled_ex
rx_step_att_ex (use +ve attenuation values to attenuate)
rx_preamp_att_ex (use -ve preamp values to attenuate)
• [add] added rx_nb_enable_ex TCI command to be able to select NB 1 or 2, eg. rx_nb_enable_ex:0,true,1;
will enable NB1 for rx1
• [add] added TCI commands vfo_sync_ex, vfo_swap_ex, fm_deviation_ex, agc_auto_ex, tx_filter_band_ex
• [add] TCI command that will run a cat command. run_cat_ex can be used to perform a thetis cat command
on itself.
Note, some cat command do not have a return state.
Note, one cat command at a time, one ; to terminate the TCI message
• [add] ApacheLabs ANAN-G1 model added - Rick N1GP
• [add] simple alpha slider for TCI spot background panels
• [change] TCI emulate ExpertElectroncsSDR3 selected as default for a new db/install. JTDX/WSJT-X
will now send TCI audio into Thetis with this option enabled. Turn it on if you are not getting any
TX TCI audio
• [change] ASIO Avid Driver (AVID Pro Tools) will be black listed by portaudio as it was causing
issues, see here https://discord.com/channels/1271453528656969789/1491198252593315940 . As a result
it will not be able to be used by Thetis
• [change] portaudio updated to commit 375345a - Apr 10, 2026
• [change] Mute will mute VAC options moved to Setup->Audio->Options, and TCI 1/2 included
• [change] restructure of TCI audio/iq threading with potential improvements likely more noticeable
when not in use
• [change] TCI message tx_frequency_thetis has become tx_frequency_ex as it extends tx_frequency.
This will break older TCI clients that used this such as HF AUTO Controller (download a new version)
• [fix] TCI server websocket text frames are now encoded utf-8. Fixes issues where certain characters
in TX profiles would cause TCI clients to throw errors
• [fix] EQ and CFC legacy mode is now stored/recovered from a TX profile. It will require another
database update. Follow the on screen instructions when you install this version
• [fix] tuner power via TCI now follows the tuner power mode, drive/own slider/fixed
• [fix] tci drive and tune_drive messages are sent on client connect
• [fix] fixed initialisation state for a number of TCI server settings

## Thetis v2.10.3.14 - Release

IMPORTANT : if you are updating from a pre v2.10.3.13 version then make a backup of your database
before using this version. If you have an existing database that pre-dates v2.10.3.13 then Thetis
will pop up a message asking you to restart whilst holding down the CTRL key. Please follow the
onscreen instructions.

JTDX/WSJTX: Watch the highlight video above if you are having issues getting JTDX/WSTJX to transmit
via TCI audio

This version, v2.10.3.14, will be the last version released publicly by MW0LGE - Richard Samphire.
This repo will no longer be updated or monitored.

## v2.10.3.14 - Change Log

- [add] otherbutton wave record now supported. Extra folder called 'waverecord' will store these.
Right click to open folder or via Setup->Audio->Recording. Similar to the [Record] button from
the WaveForm of old. Note: tx/rx transition will terminate recording
- [add] new simple WaveList record item so that wav files can be dragged to a list and played on
demand. No repeat via this simple list method. Note: you will not be able to use this if Thetis
is run as administrator
- [add] distance shown when hovering over a TCI spot if that spot has been provided with distance
info via the json payload
- [add] added custom TCI commands related to preamp and step attenuator
rx_step_att_enabled_ex
rx_step_att_ex (use +ve attenuation values to attenuate)
rx_preamp_att_ex (use -ve preamp values to attenuate)
- [add] added rx_nb_enable_ex TCI command to be able to select NB 1 or 2, eg. rx_nb_enable_ex:0,true,1;
will enable NB1 for rx1
- [add] added TCI commands vfo_sync_ex, vfo_swap_ex, fm_deviation_ex, agc_auto_ex, tx_filter_band_ex
- [add] TCI command that will run a cat command. run_cat_ex can be used to perform a thetis cat command
on itself.
Note, some cat command do not have a return state.
Note, one cat command at a time, one ; to terminate the TCI message
- [add] ApacheLabs ANAN-G1 model added - Rick N1GP
- [add] simple alpha slider for TCI spot background panels
- [change] TCI emulate ExpertElectroncsSDR3 selected as default for a new db/install. JTDX/WSJT-X
will now send TCI audio into Thetis with this option enabled. Turn it on if you are not getting any
TX TCI audio
- [change] ASIO Avid Driver (AVID Pro Tools) will be black listed by portaudio as it was causing
issues, see here https://discord.com/channels/1271453528656969789/1491198252593315940 . As a result
it will not be able to be used by Thetis
- [change] portaudio updated to commit 375345a - Apr 10, 2026
- [change] Mute will mute VAC options moved to Setup->Audio->Options, and TCI 1/2 included
- [change] restructure of TCI audio/iq threading with potential improvements likely more noticeable
when not in use
- [change] TCI message tx_frequency_thetis has become tx_frequency_ex as it extends tx_frequency.
This will break older TCI clients that used this such as HF AUTO Controller (download a new version)
- [fix] TCI server websocket text frames are now encoded utf-8. Fixes issues where certain characters
in TX profiles would cause TCI clients to throw errors
- [fix] EQ and CFC legacy mode is now stored/recovered from a TX profile. It will require another
database update. Follow the on screen instructions when you install this version
- [fix] tuner power via TCI now follows the tuner power mode, drive/own slider/fixed
- [fix] tci drive and tune_drive messages are sent on client connect
- [fix] fixed initialisation state for a number of TCI server settings

Thetis v2.10.3.10 - Final Release
A couple of things cropped up in v2.10.3.9 which has warranted a quick update. Please check the change logs below.
Explore the highlights of the changes in v2.10.3.9 over on YouTube : WATCH HERE
IMPORTANT NOTE: It is worth making a backup of your DB before installing this version. It is also worth un-installing previous Thetis installs using Add/Remove Programs before installing this version.
(Note: Uninstalling via Add/Remove Programs will leave your database intact. You don't need to take any specific action beyond backing it up if required. Thetis will handle the database appropriately.)
Tip: You can always access these release notes through the button in the About box. The full change log is also available there.
If you encounter any issues, please report them on GitHub here.
Join our Discord community for test builds and more: Click Here
v2.10.3.10 - Change Log
- [add] flash new TCI spots option in Setup->Serial/Network/MidiCat->Network. Spots that are <2 mins old will flash. Hovering over them will stop them flashing
- [add] added ^o- symbols to anan meter needle, and signal text meter to represent reading source. (^-=sig o=sig avg, ^=max fft bin)
- [fix] fix rare 'object in use' error with pretty tracker (scroll bars in UI)
- [fix] fixed ChannelMaster.dll version issue. Increase version to v1.0.1.0 which should resolve install issues where ChannelMaster.dll was not being overwritten
- [fix] fixed CW sidetone (MON) issue where it would turn off if mode was changed
v2.10.3.9 - Change Log
- [add] an [or decreased] option added to "Force ATT on Tx to 31 when Drive or Tune power is increased and PS-A is on"
- [add] many tool tips added to fields and options in the linearity form
- [add] many tool tips added to DSP setup form
- [add] software sidetone option added. New options in Setup->DSP->CW. Audio via cmASIO + VAC. Note: this only works from cwx form and external rts/cts cw switching
- [add] tx filter edge colour for the filter view item
- [add] show/hide option for grid frequency numbers in Setup->Appearance->RX Display->Text
- [add] options to show/hide major/minor grid lines in Setup->Appearance->RX Display
- [add] option to show two tone measurements in the linearity form. Note: suitable spectrum scale etc required. Code attempts to find peaks at expected locations
- [add] added fft size display to the rx display settings
- [add] Red-Pitaya radio model. Specific modifications for that hardware
- [add] PSForm tooltips now used in finder
- [add] palette option added for TX waterfall
- [add] custom waterfall palette added for RX and TX
- [add] gradient added for TX panadaptor
- [add] datafill colour/alpha, and dataline alpha added for TX panadaptor
- [add] low colour added to tx waterfall
- [add] custom meter bar for use with % variables, min/max/high/title/units
- [add] ui popups during the wdsp wisdom00 file generation. Also notified if wisdom file is older than 3 months at startup
- [add] FPS profiler in Setup->Tests. Use on a fresh database, with just region, model, and ip configured, so that you can connect + power up the radio through Thetis. Leave window position/size and do not change any settings
- [add] options to cache WDSP filter impulse data in Setup-DSP. Can also store this data to a .dat file. Read the tool tips. Improves mode switch speed and Thetis start up time
- [add] tci spot message now supports far more modes
- [add] defaults and 'stealth' mode for two tone frequencies in setup->tests
- [add] pause button in the info bar buttons to pause the display. The radio etc will continue when paused, noise floor calculations will not
- [add] pulsed/pecker tune available in Setup->Transmit
- [add] pulsed/pecker two tone available in Setup->Test
- [add] options to prevent sleep/screen saver in Setup->Options->Options2
- [add] top line of meter/gadget notes are used in the dropdown list to make identification easier
- [add] signal meter based on peak bin in the passband to mirro