Baixar Chia 2.0.0 per a Windows

- Bladebit 3.0 release - Create compressed K32 plots using ramplot or the new GPU plotting cmmand, cudaplot, to increase your effective space and earn more farming rewards
- C1 to C7 compression levels are supported, see here to understand how much compression you are getting at each level
- 256GB minimum RAM support when using a GPU, or 416GB minimum RAM support when using a CPU. NVIDIA GPU with 8GB* of VRAM, CUDA capability of 5.2 (1 series cards and up).
- Supported on Windows and Linux
- Plot from the GUI or from the CLI
- Existing uncompressed plots will still continue to work
- GPU harvesting of compressed plots (decompression) with NVIDIA cuda GPUs, farm compressed plots with high efficiency (multiple petabytes on a single GPU).
- CPU harvesting (decompression) for levels C1-C7, although up to C5 is recommended for most CPU farmers
- Chia GUI updates for farming
- The farm tab has been updated with farm health statistics to easily identify network, pool, or plot issues.
- Added a Harvester tab for GUI users to now see the amount of raw and effective space each harvester is managing as well as report on local and remote harvester latency and plot information.
This is critical information for farming compressed plots!
- New harvester settings page, including compression support, and recursive plot scan to support subdirectories.
- Plot filter reduction hard fork has been introduced due to plotting speeds increasing with the introduction of GPU plotting, and to discourage plot grinding attempts.
The first reduction for plot filters will kick in at block 5,496,000 (around June 2024) and lower the filter from 512 to 256.
Thereafter, the filters will be reduced by half every three years.
More details can be found in our blog post on GPU plotting.
- CLVM BLS additions through a soft fork
- New BLS operators to supplement point_add functionality to enable more complex CLVM performance, including signature verification and the use of zero-knowledge (ZK) proofs
- Operators for calculating a remainder through the addition of "modpow" and "%" in CLVM
- Adding operator support for secp256k1 and secp256r1 signatures to support using HSMs, hardware wallet, Apple Secure Enclave, and Android's Keystore trusted execution environment as signing devices
- Transition to BLST library to get performance gains in full nodes when validating and submitting transactions
- Local address book has been added so you can save commonly used addresses, DIDs, or domains against a contact that can be used when creating a transaction or more easily identify past transactions.
The address book is shared across all local keys on the same computer to reduce having to keep duplicate copies.
- Added a get_wallet_address RPC to enable developers to derive wallet addresses from any point in the wallet keyspace for any of the user's keys making it easier to get a specific wallet address along a derivation path for a specific key
- WalletConnect API updates
- Clawback commands have been added so DApps can initiate clawback commands to any connected wallet
- Get wallet address commands have also been added
- 2.0.0 is the last Chia update to officially support the v1 full node database.
All users are recommended to upgrade to v2 database in order to support future updates.
- Python 3.7 is no longer supported with this release.
If you are running Ubuntu 18.04, you may need to manually update your Python version.
- This release is the last Chia update to support macOS 10.14 Mojave, macOS 10.15 Catalina.
Future updates will only support macOS 11 Big Sur or higher.
- This release no longer supports Windows 8.1.
This and future updates will only support Windows 10 or higher.
- Offer files created on 1.6.2 or older Chia clients are no longer supported
Added
- Compressed plot support
- Add config option to accept private network addresses from introducers
- Generate a license directory that contains licenses missing from the installers
- 2.0 updates
- Add DataLayer clear pending roots interfaces
- Add get_wallet_addresses RPC for deriving wallet addresses
- Multi threaded chia plots check
- Hard fork 2.0
- Add fields to BlockRecord.
- Protocols: Introduce error protocol message
- Add RPC client and tests for cancel_offers endpoint
- Add sql logging config for DataLayer
- New aggregate signature conditions
- Timeout for retrieving a decompressor.
Changed
- Bump SOFT_FORK3_HEIGHT to align with the next release cycle
- Move CAT_MOD from cat_loader -> cat_utils
- Use a more aggresive activation schedule on testnet10
- Full_node: More set usage in subscription code
- Rename exclude_coin_ -> excluded_coin_ for consistency
- Add **kwargs to all generate_signed_transaction definitions
- Full_node: Add max_height to CoinStore.get_coin_states_by_ids
- Util: Some tweaks to StructStream and sized ints
- Rephrase async contextmanager DBConnection to use asynccontextmanager
- Bump chia_rs to 0.2.8
- Bump blspy to 2.0.0 (blst)
- Bump blspy to 2.0.1
- Use PKCS#8 format for SSL private keys
- Auto find setup.py packages
- Update simulator SSL keys to PKCS#8
- Support calling daemon commands from chia rpc CLI
- Use latest blspy
- Convert All CLI Commands to using async generators
- Server: Store Handshake.software_version in connections as str
- Cleanup CLI RPC connection error handling
- Plot filter hard fork
- Add DIDWallet.get_coin() to simplify DID wallet
- Update initial-config
- Bump chia_rs dependency to 0.2.9
- Remove support for Python 3.7
- Added quality lookup time info to FarmingInfo
- Updated UI_ACTUAL_SPACE_CONSTANT_FACTOR to 0.78
- Solution_generator
- Added blocks_won and last_time_farmed to get_farmed_amount Wall…
- Avoid DataLayer insert precheck
- Report certificate errors directly for CLI connection errors
- Remove references to old offer mod
- Avoid DataLayer insert ancestors precheck
- Improved pool stats handling
- Added average_block_time to get_blockchain_state FullNode RPC API
- Added get_keys_for_plot daemon server API
- Added cuda and plot compression support for bladebit 3
- Added total_effective_plot_size for get_harvesters RPC API
- Added compression level and harvesting mode to harvester protocol/mes…
- Farmer now returns missing signage points
- Pass DataLayer root and generation instead of requerying
- Update chiapos
- Added defaults to get_harvester_config API
- Update cuda plot log-progress mapping
- Update install plotters scripts
- Update chiavdf to 1.0.10
- Bump softfork3 activation by about 2 weeks
- Bump soft-fork3 activation height
- Update chiapos to full release
- Update chia_rs to 0.2.10
- Bladebit3 as the default plotter to install
- Use 'Completed writing plot' as the magic final words for cudaplot
- Adjust harvester warning to 8 seconds from 5
- Update to chiapos 2.0.2
Fixed
- Fix .get_next_from_coin_spend on VerifiedCredential and test new puzhashes
- Fix vcs get command when no proofs exist yet
- Wallet: Fix missing hint in GenesisById.generate_issuance_bundle
- Server: Fix versions for incoming connections
- Repin clvm_tools_rs==0.1.34
- Add reorg rollback to retry store
- Only subscribe to inner wallet puzzle hashes
- Rpc: Fix and test WalletRpcApi.get_coin_records_by_names
- Full_node: uint32.
MAXIMUM_EXCLUSIVE -> uint32.MAXIMUM
- Full_node: Don't send duplicates in register_interest_in_puzzle_hash
- Wallet: Deduplicate coin states from peers
- Build: include puzzles packages (#15508)
- Handle VC syncing exceptions better
- Fix hint parsing for CATs and DIDs
- Update build script for lerna 7
- Fix fork height constant for simulator / block tools
- Some NFT RPC mypy fixes
- Clawback resync
- Fix variable name typo
- Fixed add lock around plot info
- Fix Cli error when exiting on some builds of python.
- Fix whitespace on legacy-support-policy.md
- Cleanup & Fix Simulator Sub Epoch Logic
- Fix flaky CAT test
- Fix CLI indentation
- Skip clawback incoming txs while deleting the unconfirmed txs
- Fix initial-config for testnet fork points heights
- Cudaplot fix
- Fixed chia plotnft show command
- Fixed an issue where insufficient block interval was used to calculate average block time
- Fixed an issue where -t option was required in cudaplot
- Add ALLOW_BACKREFS as a flag to get_puzzle_and_solution_for_coin in full_node_api.py
- Fix clawback sender resync issue
- Correct --insecure flag to cancel_offer command line
- Fixed an issue where chiapos recognized t2 as required option
- Fix DataLayer deadlock
GUI Changes
- Refactor TX filter to use TransactionTypeFilterMode Enum by @zsolt-dev in Chia-Network/chia-blockchain-gui#1837
- Added spendClawbackCoins WalletConnect command by @zsolt-dev in Chia-Network/chia-blockchain-gui#1853
- Updated lerna to 7.0.0 and node to 16.20.1 by @paninaro in Chia-Network/chia-blockchain-gui#1861
- Updated mui and lingui by @seeden in Chia-Network/chia-blockchain-gui#1865
- Fixed WalletConnect Dapp disconnection issue by @seeden in Chia-Network/chia-blockchain-gui#1866
- Use new useAuth hook for logIn by @seeden in Chia-Network/chia-blockchain-gui#1868
- Updated locales by @seeden in Chia-Network/chia-blockchain-gui#1887
- Fixed scroll overflow in the header by @seeden in Chia-Network/chia-blockchain-gui#1874
- Added CRCat api by @zsolt-dev in Chia-Network/chia-blockchain-gui#1893
- Added useGetWalletAddressesQuery RPC hook by @paninaro in Chia-Network/chia-blockchain-gui#1892
- Fixed clawback button time comparison with latest block time by @zsolt-dev in Chia-Network/chia-blockchain-gui#1884
- Switch back to wallet balance view after creating CAT tx by @zsolt-dev in Chia-Network/chia-blockchain-gui#1903
- Fixed VC rendering by @seeden in Chia-Network/chia-blockchain-gui#1888
- Plotting/harvesting updates for compressed plots by @ChiaMineJP in Chia-Network/chia-blockchain-gui#1772
- Updated WalletConnect to 2.9.0 by @seeden in Chia-Network/chia-blockchain-gui#1897
- Added Address book feature by @lipalong and @joytechu in Chia-Network/chia-blockchain-gui#1910