Популярни: Данните са обновени на 20 ноември 2026 г.

Категории

Интернет1419
Комуникация328
Аудио и видео938
Графика и дизайн564
Офис и продуктивност1182
Разработка3284
Изкуствен интелект608
Сигурност408
Системни инструменти3191
Игри544
Образование и наука242
Мрежа и ИТ294

Gleanvolt: стари версии за изтегляне

Locally hosted controller for a SolaX hybrid inverter and EV charger, over Modbus TCP.

В списъка има 5 версии на Gleanvolt – от 13 октомври 2026 г. до текущата 1.3.0. Всяка води към инсталаторите на сървъра на разработчика.

2026: 5 5 26
ВерсияДатаРазмерФайлове
1.3.0Последна 18 ноември 2026 г. — 64-битова ZIP
Списък с промени
Install
Debian, Ubuntu, Raspberry Pi OS (64-bit)
Installs the controller and its web UI as a systemd service, started with the default
configuration. Run it again to upgrade; settings and data are kept.
curl -fsSL https://github.com/mpospisil/gleanvolt/releases/latest/download/install.sh | sudo sh
Or by hand, choosing amd64 or arm64:
wget https://github.com/mpospisil/gleanvolt/releases/download/v1.3.0/gleanvolt_1.3.0_arm64.deb
sudo apt install ./gleanvolt_1.3.0_arm64.deb
Then open http://<device>:8090 and set your inverter and charger addresses in
/etc/gleanvolt/gleanvolt.env.
Docker
docker pull ghcr.io/mpospisil/gleanvolt:1.3.0
Or download a self-contained build below and run it — no .NET installation needed.
gleanvolt-1.3.0-win-x64.zip for Windows, linux-arm64 for a Raspberry Pi,
linux-x64 for an x64 Linux host or NAS.
Shipped plugins
gleanvolt-plugin-openweather-1.3.0-<platform>.zip is the weather from OpenWeatherMap, run
beside Gleanvolt with External chosen under Settings → Weather. In Docker it is the image
ghcr.io/mpospisil/gleanvolt-plugin-openweather:1.3.0, and the openweather
profile of the compose stack. The README inside the zip says how to run it.
The .nupkg files are the libraries, for building on the controller directly.
They are attached here rather than pushed to a feed.
Verify your download
SHA256SUMS covers every file here. From the directory you downloaded into:
sha256sum -c --ignore-missing SHA256SUMS
--ignore-missing because you have probably taken one file rather than all of them.
On Windows, without installing anything:
Get-FileHash gleanvolt-1.3.0-win-x64.zip -Algorithm SHA256
and compare it with the line in SHA256SUMS. PowerShell prints the hash in upper case;
the file lists it in lower case, and they are the same hash.
Each zip, .deb, install.sh and .nupkg also carries a build provenance attestation, which says
which workflow run and which commit produced it rather than only that the bytes are
unchanged. That needs no trust in this page:
gh attestation verify gleanvolt-1.3.0-linux-arm64.zip --repo mpospisil/gleanvolt
Changes
- Keep passing WEATHER_API_KEY to the controller so the migration sees it (#425) (#432)
- Remove the built-in OpenWeather; the OpenWeather plugin replaces it (#425) (#431)
- Ship plugins with Gleanvolt, starting with OpenWeather (#426) (#428)
- The weather as an external provider, and an OpenWeather plugin (#424) (#427)
- Keep the runtime charge settings across a restart (#421) (#423)
- Runtime charge settings over the API (#392) (#422)
- Resume the charge mode after a restart (#413) (#420)
- A secret store in the provider SDK (#416) (#419)
- Provider status in the viewer's language, and the Volkswagen page in Czech (#415) (#418)
- Vehicle 1.2: tell the car provider when a charging session is open (#414) (#417)
- Volkswagen plugin on the Pi: Blazor's script in the image, and a page Gleanvolt may frame (#410) (#412)
- A provider's own page in Gleanvolt, and the Volkswagen feed as a plugin (#410) (#411)
- The car as an external provider, with a sample plugin (#408) (#409)
- One token for every external provider (#406) (#407)
- Solar forecast as an external provider, with a sample (#388) (#405)
- Solar forecast: split the host-side store from its sources (#387) (#404)
- Tariff sample: debug with the token in user secrets (#401) (#403)
- External data providers: the framework and the low tariff (#389) (#402)
- gleanvolt-install: version 1.2.0, the release it was tested against, for publishing (#390) (#400)
- Agent skills: install and set up Gleanvolt (#390) (#399)
- Empty Home Assistant settings mean unset, and a failed start exits (#396) (#398)
- Docs: Mode to start, the Gleanvolt panel, and installing through the Marketplace (#393) (#397)
- Docs: the Home Assistant integration (HACS) on the 1.2 API (#393) (#395)
- Product line 1.3 (#385)
Licence: free for any noncommercial purpose under the PolyForm Noncommercial
License 1.0.0. Commercial use requires a separate licence — see LICEN
1.2.0 11 ноември 2026 г. — 64-битова ZIP
Списък с промени
Install
Debian, Ubuntu, Raspberry Pi OS (64-bit)
Installs the controller and its web UI as a systemd service, started with the default
configuration. Run it again to upgrade; settings and data are kept.
curl -fsSL https://github.com/mpospisil/gleanvolt/releases/latest/download/install.sh | sudo sh
Or by hand, choosing amd64 or arm64:
wget https://github.com/mpospisil/gleanvolt/releases/download/v1.2.0/gleanvolt_1.2.0_arm64.deb
sudo apt install ./gleanvolt_1.2.0_arm64.deb
Then open http://<device>:8090 and set your inverter and charger addresses in
/etc/gleanvolt/gleanvolt.env.
Docker
docker pull ghcr.io/mpospisil/gleanvolt:1.2.0
Or download a self-contained build below and run it — no .NET installation needed.
gleanvolt-1.2.0-win-x64.zip for Windows, linux-arm64 for a Raspberry Pi,
linux-x64 for an x64 Linux host or NAS.
The .nupkg files are the libraries, for building on the controller directly.
They are attached here rather than pushed to a feed.
Verify your download
SHA256SUMS covers every file here. From the directory you downloaded into:
sha256sum -c --ignore-missing SHA256SUMS
--ignore-missing because you have probably taken one file rather than all of them.
On Windows, without installing anything:
Get-FileHash gleanvolt-1.2.0-win-x64.zip -Algorithm SHA256
and compare it with the line in SHA256SUMS. PowerShell prints the hash in upper case;
the file lists it in lower case, and they are the same hash.
Each zip, .deb, install.sh and .nupkg also carries a build provenance attestation, which says
which workflow run and which commit produced it rather than only that the bytes are
unchanged. That needs no trust in this page:
gh attestation verify gleanvolt-1.2.0-linux-arm64.zip --repo mpospisil/gleanvolt
Changes
- Release: expect the nine .nupkg the build now packs, by name (#384)
- Targeted: a Low tariff only option that pauses charging in high tariff (#382) (#383)
- Charge control: a full car that shows Stop one poll early still ends as complete (#381)
- Manual: the Czech translation (#329) (#380)
- Manual: point users at it, from the web UI, the README and docs/ (#329) (#379)
- Manual: how it works, troubleshooting, privacy and a glossary (#329) (#378)
- Tests: the mDNS foreign-name test waits for both announcements (#377)
- Manual: Sessions, Energy and Forecast (#329) (#376)
- Manual: the Overview and every charging mode (#329) (#375)
- Manual: the Setting up chapter (#329) (#374)
- Manual: the Installation chapter, and links checked on the built site (#329) (#373)
- Manual: Starlight skeleton, screenshots from the real pages, the setup wizard page (#329) (#372)
- Web: found on the LAN as gleanvolt.local, over mDNS (#363) (#371)
- Setup: the device search hint names no brand (#369) (#370)
- Docs: troubleshooting, Docker and account sign-up from the wiki into docs/ (#365) (#368)
- Docs: a short README for users, with the manual moved into docs/ (#365) (#367)
- NAS: a compose file of its own, and how to run it on each NAS (#327) (#366)
- Docs: inverters and chargers in pages of their own, grouped by manufacturer (#364)
- Chargers 6: chargers in discovery, setup and docs (#353) (#362)
- Chargers 5: go-e over its local HTTP API v2 (#352) (#361)
- Chargers 4: Huawei SCharger over Modbus TCP, readings only (#351) (#360)
- SolaX: the charger's fixtures are now real snapshots (#350) (#359)
- Chargers 3: charger snapshots and charger conformance tests (#350) (#358)
- Chargers 2: select the charger driver in configuration, Settings and the wizard (#349) (#356)
- Chargers 1: charger driver contract, with the SolaX X3-HAC behind it (#348) (#355)
- SolaX: the probe also asks for the serial number's model prefix (#319) (#346)
- SolaX: the battery-charging fixture is now a real snapshot (#319) (#345)
- Drivers 8: Huawei in discovery, setup and docs (#324) (#344)
- README: use at your own risk (#343)
- Drivers 7: Huawei battery hold through the maximum discharging power (#323) (#342)
- Drivers 6: Huawei behind an EMMA (#322) (#341)
- Driv
1.1.0 7 ноември 2026 г. — 64-битова ZIP
Списък с промени
Install
Debian, Ubuntu, Raspberry Pi OS (64-bit)
Installs the controller and its web UI as a systemd service, started with the default
configuration. Run it again to upgrade; settings and data are kept.
curl -fsSL https://github.com/mpospisil/gleanvolt/releases/latest/download/install.sh | sudo sh
Or by hand, choosing amd64 or arm64:
wget https://github.com/mpospisil/gleanvolt/releases/download/v1.1.0/gleanvolt_1.1.0_arm64.deb
sudo apt install ./gleanvolt_1.1.0_arm64.deb
Then open http://<device>:8090 and set your inverter and charger addresses in
/etc/gleanvolt/gleanvolt.env.
Docker
docker pull ghcr.io/mpospisil/gleanvolt:1.1.0
Or download a self-contained build below and run it — no .NET installation needed.
gleanvolt-1.1.0-win-x64.zip for Windows, linux-arm64 for a Raspberry Pi,
linux-x64 for an x64 Linux host or NAS.
The .nupkg files are the libraries, for building on the controller directly.
They are attached here rather than pushed to a feed.
Verify your download
SHA256SUMS covers every file here. From the directory you downloaded into:
sha256sum -c --ignore-missing SHA256SUMS
--ignore-missing because you have probably taken one file rather than all of them.
On Windows, without installing anything:
Get-FileHash gleanvolt-1.1.0-win-x64.zip -Algorithm SHA256
and compare it with the line in SHA256SUMS. PowerShell prints the hash in upper case;
the file lists it in lower case, and they are the same hash.
Each zip, .deb, install.sh and .nupkg also carries a build provenance attestation, which says
which workflow run and which commit produced it rather than only that the bytes are
unchanged. That needs no trust in this page:
gh attestation verify gleanvolt-1.1.0-linux-arm64.zip --repo mpospisil/gleanvolt
Changes
- Release smoke test: configure a location and no password, so it is not in setup mode (#326)
- Supported PV systems: Dražice inverters as rebadged SolaX (#315)
- Supported PV systems: Manufacturer column on the inverter and charger tables (#314)
- Restart from the web UI applies settings without a supervisor (in-process restart) (#313)
- Settings and wizard: tips that say what each field means, and Reveal for typed passwords (#312)
- Setup 3: the command-line route (#303) (#311)
- API keys created on Settings: 24 letters and digits instead of 64 hex (#310)
- Setup 2: Home Assistant (MQTT) and the API on Settings and in the wizard (#302) (#309)
- Setup 2 wizard (#308)
- Setup 2: the weather key on Settings and in the wizard (#302) (#307)
- Setup 2: web setup wizard with device discovery, and the hybrid gate (#302) (#306)
- Setup 1: setup mode instead of a startup failure, and password reset (#301) (#305)
- Setup 0: no reference site in the shipped defaults (#300) (#304)
- Solar: a battery that stops taking charge short of the gate counts as full (#298)
- L10n: Czech terms for the controller, the rest level and the solar forecast (#297)
- L10n: simpler, correct Czech and English in the web UI (#296)
- L10n: the web UI in Czech (#291) (#295)
- i18n, part 2: the rest of the service text, and stored phrases read back (#292) (#294)
- The web UI is translatable; the services stay invariant (#290) (#293)
- Container networking: the host network, and a broker on any device (#268) (#289)
- Sun only on a targeted charge, from the web UI and Home Assistant (#251) (#288)
- Settings: the Solcast account, entered and applied without a restart (#286) (#287)
- Settings: the redesign's info tips, restart banner and SolaX phase names (#255) (#285)
- Session energy starts afresh on an unplug in Off (#283) (#284)
- Forecasted, until full: one session over several days (#279) (#282)
- Every mode waits and ends the same way (#280) (#281)
- Charging plan: the redesign's info tips (#255) (#278)
- Overview: the redesign's info tips, session card and car stats (#255) (#277)
- Fast and SolarGrid can wait for low tariff (#274) (#276)
- The grid tariff: providers, the table on Settings, and where it shows (#273) (#275)
- Breaking: the HTTP API car
1.0.12 15 октомври 2026 г. — 64-битова ZIP
Списък с промени
Install
Debian, Ubuntu, Raspberry Pi OS (64-bit)
Installs the controller and its web UI as a systemd service, started with the default
configuration. Run it again to upgrade; settings and data are kept.
curl -fsSL https://github.com/mpospisil/gleanvolt/releases/latest/download/install.sh | sudo sh
Or by hand, choosing amd64 or arm64:
wget https://github.com/mpospisil/gleanvolt/releases/download/v1.0.12/gleanvolt_1.0.12_arm64.deb
sudo apt install ./gleanvolt_1.0.12_arm64.deb
Then open http://<device>:8090 and set your inverter and charger addresses in
/etc/gleanvolt/gleanvolt.env.
Docker
docker pull ghcr.io/mpospisil/gleanvolt:1.0.12
Or download a self-contained build below and run it — no .NET installation needed.
gleanvolt-1.0.12-win-x64.zip for Windows, linux-arm64 for a Raspberry Pi,
linux-x64 for an x64 Linux host or NAS.
The .nupkg files are the libraries, for building on the controller directly.
They are attached here rather than pushed to a feed.
Verify your download
SHA256SUMS covers every file here. From the directory you downloaded into:
sha256sum -c --ignore-missing SHA256SUMS
--ignore-missing because you have probably taken one file rather than all of them.
On Windows, without installing anything:
Get-FileHash gleanvolt-1.0.12-win-x64.zip -Algorithm SHA256
and compare it with the line in SHA256SUMS. PowerShell prints the hash in upper case;
the file lists it in lower case, and they are the same hash.
Each zip, .deb, install.sh and .nupkg also carries a build provenance attestation, which says
which workflow run and which commit produced it rather than only that the bytes are
unchanged. That needs no trust in this page:
gh attestation verify gleanvolt-1.0.12-linux-arm64.zip --repo mpospisil/gleanvolt
Changes
- AppContext.BaseDirectory does not resolve through WinGet's alias symlink either (#252)
- Forecasted drops the session energy target; an amount is what Targeted is for (#250)
- Targeted min soc hint (#248)
- Fold the header links behind a Menu button on phones (#247)
- Say how to clear Fast's Ready by time (#246)
- Say what Targeted's minimum battery SOC actually does (#245)
- Keep a developer's local Worker data out of built images (#244)
- Add a Nano Server smoke test for the WinGet win-x64 artifact (#243)
Licence: free for any noncommercial purpose under the PolyForm Noncommercial
License 1.0.0. Commercial use requires a separate licence — see LICENSE.
1.0.11 13 октомври 2026 г. — 64-битова ZIP

Етикети

Сподели